I installed Daytona Power Cable USB Type-C L-shaped connector on my Ducati StreetFighter 1098S and action camera DJI, installation is very simple and takes about 30 minutes with the included power cables, the camera is woking fine.
View Detail
- Sale
- Instock
17.87 USD (2,651 JPY) 21.57 USD Save 17%
Webike Point: +27 pt
(0.18 USD)
Delivery Information
In Stock, Ships within 24 hours.
Estimated arrival date around
Product detail
・USB Type-C
・The L-shaped connector prevents the cable from sticking and disconnecting
・No need for a separate power supply
・You can charge your phone with just this cable
・By simply interrupting the brake switch, you can extract power.
・Supports fast charging
[Harness length]
■Body
・Type-C connector to transformer: Approx. 800mm
・Transformer to positive wire: Approx. 180mm (including fuse case)
・Transformer to negative wire: Approx. 800mm
■Extension Harness
・Positive wire: Approx. 1,200mm
・Negative wire: Approx. 800mm
■Brake switch: Approx. 270mm
・Branch harness: Approx. 50mm after branching
[typing]
・Input Voltage: DC12V
・Input voltage range: DC12V-16V
・Maximum input current (no load): 5mA or less
[Output]
・Output rated efficiency: 18W (5V/3A, 9V/2A, 12V/1.5A)
[Set components]
・Main unit (mini glass tube fuse Φ5.2 x 20 / 250V 5A) x 1
・Handlebar Clamp x 1
・Brake switch branch harness (positive wire) x 1
・Extension harness (positive wire) x 1
・Extension harness (negative wire) x 1
・Wiring connector x 1
・Release type cable-tie x 1
・Binding bands x 2
**When the brake switch does not have a flat terminal (Model 187), connect it with the supplied extension harness (Model CA103).
*This product is compatible with USB Power Delivery and may not be used with devices that do not support high power fast charging.
*Not available for Daytona headset DT-01, DT-E1, other companies' headsets and some heated cigarettes.Also, some cameras (including single-lens reflex / mirrorless cameras) may not be usable.
*There may be changes in product specifications due to the manufacturer's reasons..
[L-shaped connector]
The compact L-shaped connector with less overhang prevents the cable from sticking out or breaking when the handle is turned.
[Can be charged with one cable]
Until now, charging a smartphone required a power supply unit and a cable, but now it is possible to charge a smartphone with a single cable.
The handlebars of the motorcycle will be cleaned.
[Waterproof design for peace of mind even in the rain]
It has a cap that covers the terminal part, so you don't have to worry about the terminal getting wet even when you're not using it.
[Rapid charging is possible]
Maximum 18W (5V/3A, 9V/2A, 12V/1.5A) output.
[Power is simply removed by interrupting the brake switch]
The power supply can be easily removed by interposing it into the brake switch.
*When the brake switch does not have a flat terminal (Model 187), connect it with the supplied extension harness (Model CA103).
Points of Attention
* If there may be an instruction manual included, it will be written in Japanese.
NEW ARRIVALS IN USED PARTS FOR
NEW ARRIVALS IN USED PARTS FOR
NEW ARRIVALS IN USED PARTS FOR
New arrivals in used
New arrivals in used
Customer Reviews
Reviews with image
Installed on: DUCATI STREETFIGHTER S
Nov 22, 2021
First of all, the big transformer is a hindrance.
A Cowl car might be fine, but there is no place around the Front in NAKED to fit such a big transformer.
Is this transformer Waterproof in the first place?
It is not mentioned anywhere.
However, the Cable to the transformer and USB is also slightly short to fit under the Tank.
In other words, I don't want to put electronic components in a place where the heat of the engine will come to them.
When I found this product, I thought it was very convenient because USB can be plugged into the phone as it is, but when I assembled it temporarily, I thought that the Cable was in the way when I wasn't using it and it was shameful.
Also, because of the above problem with the transformer, I didn't install it after all and put it in storage.
All the recent DAYTONA electrical items are no good because they all have this ugly transformer on them.
The USB Cable that comes out from KIJIMA is not like a transformer on the way, and I was able to install it with Refreshing, so I decided to use KIJIMA after all.
Ideas was good, but I was very disappointed with the product!
Helpful?
May 6, 2021
[How is it used?
I use it to charge my phone on Touring.
Was the one you received as per Image?
It was just as Image.
How was your experience with it?
There is a Waterproof Cover for the Connector when it is not in use and the Connector can be fixed with the attached Clamp.
So convenient.
Cable is covered with Protective Tube, so it seems to be durable.
Helpful?
Nov 10, 2020
Performance is good enough, expect durability!
My current USB power supply is in a bad mood and won't charge properly, so I bought this new USB and installed it!
Bottom line, the charging performance, it's meh!
The one I used before was in too bad shape and only gave out about 50mA, but after replacing it, it was over 2000mA!
It's perfectly fine to run with Navigation and music on!
I'm happy with just this, but since I'm going to write a MeritDemerit for this product...
Merit
Compatible with USB powerdelivery for fast charging!
No need to buy a new USB cable as it is integrated with the USB cable!
You can get power from the Brake Switch!
Demerit
Because the Cable of the power supply is red and long, it stands out around Brake master.
If the USBConnector is damaged, all the parts including Harness will be replaced
This is the case
Touching the Merit part, you don't have to look for various cables to be compatible with the USB cable, and as long as it's powered off, the PD is compensated. (Is that an exaggeration?) It's actually quite large!
This is actually very easy to use compared to other USB power supplies, because there are many restrictions when trying to use the functions of the PD, and it often doesn't work in some combinations!
It comes with a Harness that can be interrupted by the Brake switch, so it seems to be easy to get the power out for those that fit!
If you touch the Demerit part, the Cable for Brake switch interrupts related to the Merit part is a bright red Cable, so it is very noticeable around the Brake master!
In the case of my motorcycle, where should I take the Minus side from because of the aluminum frame? After all, I decided to take it from the Relay power supply that is attached to the Plus minus and the minus near the Battery! (There's no extra wiring around the Handlebar, so the installation is better as a result.)
You also need to be concerned about the position of the transformer box, so I think it's necessary to match the actual car. (I've tied it to Clutch Wire.)
The performance is unquestionable as long as the Connector doesn't break, so even if it does break, it might REPEAT…!
Helpful?
New Custom Articles
