[Component] ・Clamp bracket ・Sub-harnesses for each model ・Rubber mount type bracket
Body size: Φ48mm Screw size: M4 x 18mm Mounting Pitch :37mm Guideline type electric tachometer: -12500rpm display
*Please do not install any aftermarket H.I.D kit or any other company's LED headlights or fog lamps at the same time.Some ballasts / inverters (voltage converters) emit high-voltage noise that may adversely affect digital circuits, causing product failure or malfunction. *Not completely waterproof due to the moisture vent holes.A hole is provided on the back of the main unit to drain moisture generated by changes in internal temperature due to operation.
*Depending on the lot, the product may be delivered with the old price and label with the old JAN code before the price change.
The "Φ48 Small DN Tachometer Kit 12500RPM" can be installed on the stock handlebar without any wiring modification
■Details This product comes with a clamp bracket that is compatible with the stock handlebar and a motorcycle specific sub-harness, so you can install the Φ48 Small DN Tachometer 12500RPM on the Cross Cub 50 (AA06) and Cross Cub 110 (JA45) without the need to modify the stock parts or wiring. The wiring can be connected to the service coupler on the main harness by using the dedicated sub harness.
■Φ48 Small DN Tachometer DN = Digital Needle The angle of the pointer is completely controlled by a digital signal & small motor, which provides high reliability and high holding power of the pointer. In addition to the RPM function, the meter is equipped with a thermometer, a clock, an engine work timer, and an automatic measurement function (maximum temperature record / maximum RPM record). The black panel with white LED lighting provides excellent nighttime visibility.
■Φ48 Small DN Tachometer Details ・The monitor is equipped with a variety of functions (digital display) A thermometer (up to 150 degrees) and a stick temperature sensor are included, so you can measure the outside air temperature by placing the temperature sensor inside the cowl.
・Automatic measurement function The maximum temperature record and the maximum rpm record are done automatically when the meter is installed. After running, you can check the record by switching the meter display, and the record will be saved until resetting.
・Engine work timer Timer that automatically adds up the engine operating time above 500rpm. It stops when the speed drops below 500rpm. Maximum time: 9999 hours (up to 100 hours is recorded in minutes, and over 100 hours is recorded in hours.) Resettable.There is a non-display setting
・Clock 24-hour display with hide setting
Points of Attention
* If there may be an instruction manual included, it will be written in Japanese.
* The BEST and MUST store to find Japanese parts. * Register now for amazing deals and other special offers! *Over 800,000 listed items. It's hard NOT to find your parts.
SIGN IN TO WEBIKE JAPAN
Please enter email at least 6 characters.
Please enter a valid email address.
Email is already in use.
Your account has been banned.
Email address and/or password is not match.
Authentication with facebook fail.Please try again.
Please select How did you get to know about Webike Japan?
OR
YOUR ACCOUNT HAS BEEN CREATED!
Congratulations! Your new account has been successfully created! You can now take advantage of member privileges to enhance your online
shopping experience with us. If you have ANY questions about the
operation of this online shop, please email Webike through CONTACT US.
A confirmation has been sent to the provided email address. If you
have not received it within the hour, please contact us.
Get on your grid by register your motorcycle! About our "Mybike" service
"Easier to Search Items" It helps you to search items to fit for your motorcycle!
"Get Much Valuable Information" It helps you to get special deals, newly listed items and closeouts about your motorcycle!
"Easy to Register" It requires only your motorcycle manufacturer, model name and model year!