187.61 USD (27,871 JPY)
Delivery Information
This item is discontinued.
Product detail
Old part number:05-05-0029
[function list]
■Tachometer -14000rpm
・Automatic maximum RPM record
・LED gauge type tachometer (red LED) with selectable lighting pattern and turn off
・RPM alarm display also dual-purpose; LED flashes when exceeded the set limit.
・Alarm display rpm can be set in 100 rpm increments between 3000 and 9000 rpm
・Tachometer display with numerical values is also available by setting the display mode
■Numerical tachometer
■Speedometer
・Automatic maximum RPM record -199km/h in 1km increments
・Tire O.D. correction input possible
■Various indicators
・Turn Signal (green)
・High beam (blue)
・FI CHECK (Yellow)
・Speed warning (blue) /Temperature warning (red)
・Air/fuel ratio display (red-green-blue)
■Gasoline Gauge
・10-step display
・Sensor resistance can be compensated
■Various backlight settings
・Backlight brightness change (5 levels)
・Backlight color change (green, light blue, blue, purple, pink, red, orange, yellow, white)
■Odometer (arbitrary starting distance input possible)
・9999.9km, 1km increments
■Trip (Eliminable Mileage) A/B
・9999.9km, 0.1km increments
■Oil trip
・9999km 1km increments
■Oil check
・User-definable range from 100 km to 9900 km in 100 km increments
・OIL CHECK is displayed at the bottom of the meter when the distance is exceeded
■Engine temperature (no additional sensor required)
・Displayed using signals from the stock ECU
■A/F ratio (no additional sensor required)
・Displayed using signals from the stock ECU
■Power test mode (fully automatic acceleration measurement function)
**This meter is exclusively used for the subject bikes.Cannot be installed on other bikes.
*Cannot be installed at the same time as HID or other manufacturer's LED headlights or additional meters.
*The TEMP (engine temperature) and A/F (air-fuel ratio) displayed on this meter are calculated based on the information output from the bike's stock ECU.If you measure separately with an external meter, the displayed value may differ.
*Depending on the lot, the product may be delivered with the old price and label with the old JAN code before the price change..
The "Super Multi LCD Meter" is a multi-functional meter that can be installed simply by replacing the stock meter without any wiring modifications!!
In addition to the functions of the stock meter, engine temperature, air-fuel ratio, and battery voltage can also be displayed!!!
The Super Multi-LCD meter is also equipped with a number of other functions, such as a peak hold function for RPM, speed, and temperature, front tire diameter compensation, and backlight color change.By selecting the power test mode separately, it also has a function to measure the section acceleration time (with graph display) as a function for competition.
[About Power Test Mode]
This is a fully automatic acceleration measurement function that automatically starts measurement when the front wheel starts to rotate.
Measurement stops automatically when the set running time or distance is reached.
Configurable time: 5-60 seconds (in 5 second increments).
Configurable distance: 20・30・40・50・60・70・80・90・100・200・300・400・500・1000 (m)
The recordings can be stored for 9 measurements and can be read out and checked after each run.
The distance traveled and the speed at which the distance is reached are recorded in 0.1 second increments from the start of the trip, as well as the final values of the distance traveled and the speed at which the distance is reached, and the values at any given position can be viewed in a graph.Also, there is a function to easily move to the first data after 50, 100, 200, 400, 500, or 1000 meters of riding distance.
For example, the record is measured at 400m and the reference time at 100m can be easily displayed.Similarly, there is a function to move to the first data beyond 50, 100 and 150 km/h.
(Note that the record is in increments of 0.1 second, so it is not the exact distance or speed, but the first record that exceeds the selected value.)
The data can be erased at any time after each measurement, but the data will not be lost even if the key is turned off or the battery is removed from the meter unless the data is erased.
Points of Attention
* If there may be an instruction manual included, it will be written in Japanese.