797.91 ~ USD (118,535 JPY) 841.43 USD Save 5%
Delivery Information
-
Please select product form first.
Product detail
Former part number:
C3150(K8013-169-MD)
C3151(K8013-169-LG)
C3152(K8013-169-XL)
C3149(K8013-169-SM)
■Right and left set
Color: Black
Material: Forged Carbon
Weight: 530g (one side)
[Components]
・Hinge pad black
・Hinge stop inserts
・User Manual
*
*If the brace is worn correctly, the hinge should be positioned at the center of the knee and the knee should move naturally.If you feel any discomfort, please remove and put on again from the beginning.Make sure that the strap is not too tight or twisted.If you feel any pain or discomfort while wearing or using the brace, stop using it immediately and consult a specialist.
*Please use this guide as a guide only.
*POD Knee Braces are available in two sizes, one for the right leg and one for the left leg.
*If you wear the wrong size or the wrong side, the brace function will be affected.
*There may be changes in product specifications due to the manufacturer's reasons.
.
* The image is only for reference. The image shown may differ from the actual product.
High-end model with forged carbon frame that combines lightness and strength.
■Slimmer and stronger ligament system
Slimmer than its predecessor, with a sleeker hinge housing.
The ligament is made of Vectran fiber, which is five times stronger than steel, and covered with flexible TPU.
■Advanced protection performance
Follows the movement of the knee to protect it from any impact.
The smoother, thinner impact guard fits the rider's knee in a natural way.
■New liner with improved fit and antibacterial effect
The improved hinge pad is closer to the knee than previous models.
The advanced straps hold the tibia and thighs securely and reduce discomfort such as slippage.
The top and bottom straps also have a quick lock feature.
The antibacterial liner reduces odor caused by sweat and dirt.
This guide should be used as a guide only.
POD knee braces are available in two sizes, one for the right leg and one for the left leg.
If the brace does not fit properly or is worn on the wrong side, the brace will not function properly.
Size Knee Circumference Dimensions Model
S:32.0cm-34.0cm(K8 2.0)
M:34.0cm-36.0cm(K8 2.0)
L:36.0cm-38.0cm(K8 2.0)
XL:38.0cm-40.2cm(K8 2.0)
Measure the circumference at the center of the kneecap.
Without any clothing, stand with your knees fully extended and in a straight stance (*knees straight).
Installation instructions: For this product to function properly, the brace must be in the correct position and the straps must be tightened securely.
The knee brace should be worn directly over the skin, or over thin socks or inner pants for knee braces.
Do not wear the brace over jeans, sportswear, or heavy clothing.
■Step 1:
Please make sure your knee size is correct
■Step 2:
Release the strap end on the side/outside of the brace and loosen all straps, then pull the strap end out of the strap loop.
■Step 3:
Place the brace on the knee with the knee bent at 90 degrees, making sure the hinge of the brace is at the side of the knee joint.
■Step 4:
Tighten the lower knee strap #1 (just below the knee), this strap is located at the top of the calf and is important for the correct positioning of the brace.
Thread the strap end through the strap loop, making sure that the strap is not twisted and that it is comfortably and securely fastened.
■Step 5:
Attach the upper knee strap #2 in the same manner as step 4.(Just above the knee)
■Step 6:
Attach the upper knee strap #3 in the same manner as step 4.
■Step 7:
Attach the upper knee strap #4 in the same manner as step 4.
NEW ARRIVALS IN USED PARTS FOR
NEW ARRIVALS IN USED PARTS FOR
NEW ARRIVALS IN USED PARTS FOR
New arrivals in used
New arrivals in used
Customer Reviews
There are no Customer Review yet.
New Custom Articles
