**The exhaust and other parts are hot immediately after the engine is stopped.Allow to cool sufficiently before hanging the cover.
*Please loosen the drawcord before use.If you pull it forcibly, it may be damaged.
*Please check the picture for the compatible model.
*Do not use this product for any purpose other than for a motorcycle body cover.
*This product is designed to be waterproof, but rainwater may seep in due to deterioration of the material caused by aging and ultraviolet rays.
*Applying more force than necessary to the product may cause damage.Please be careful not to get it caught on the protruding parts of the motorcycle.
*In high winds, the bike may roll over due to wind resistance.The cover may be blown off by a gust of wind, so please be careful in stormy weather.
*The inside of the bag is made of scratch-resistant material, but scratches may occur due to the frequency of use, environment, and dust and dirt attached to the bag.
*When using the cover on a repainted vehicle, please refrain from using it when the vehicle body is not dry enough.Color may transfer to the cover.
*The specifications of this product are subject to change without notice for reasons of improvement or enhancement..

High performance and high durability.
This is the standard for MCP.

with a drawcord
Built-in drawcord around hem.
Easy to adjust from the rear after the cover is installed.
It fits the bike better and is more effective against wind.

Carrying Handle
Handles on the front and back are provided for easy lifting when removing the cover.
When installed, it can be used as a color marker for front and rear (front / yellow, rear / black).

＜Resistant to rain and dew!＞
Adoption of new cutting method
Newly designed cover body with fewer seams on the top of the body.
Easy to put on and take off.

Buckles & Belts
The cover can be fixed around the side of the vehicle with a belt to prevent it from coming off.
One-touch buckle for easy on / off.

＜It can be used as a landmark when removing and installing.＞
back panel
Black material on the back edge of the cover.
It serves as a landmark to indicate the front and rear when installed, and it is very easy to remove and install in daily life.

＜The large bike lock can also be installed!＞
With front and rear lock holes
Holes for U-shaped locks and chain locks are provided at the front and rear of the unit.
Designed for any size of equipment with long hole type.
When the cover is installed, the color coding on the front and rear will serve as a landmark (front / yellow, rear / black).

＜Equipped to prevent moisture buildup!＞
air ventilation
Air vents on the side of the main body to vent the air inside.
This is a device to prevent the bike from rusting during the rainy season.