Adjustable Clip-on Handlebars for GROM

From the manufacturer:
Comfortable ridingg is created by a comfortable position
Hello, this is Aikyo from World Walk.Why can't you adjust the position of the handlebars on your bike?Have you ever wondered thatCars are naturally designed to allow you to adjust the position of the steering wheel and seat for a comfortable driving experience.However, in the case of motorcycles, you cannot change the seat position or even the handlebar position in most models.

If you are short and arms and legs are not long, you can't find a bike that fits my feet and handlebar position.
In order to find the right handlebar position for you, you need to find the one that suits you best from among the many handles sold by different manufacturers.It is difficult to confirm whether the handlebar is suitable for you without actually installing it, and it takes a lot of effort to install it.
The handlebar position of a motorcycle has a greater effect on steering than that of a vehicle.Once you find the right handlebar position for you, you will find it much easier to handle the bike.
World Walk's philosophy is to develop parts that make your motorcycle more comfortable to ride.What you need to do to find the best handlebar position for you.World Walk concluded that it is not to make many kinds of handlebars, but to make handlebars which can change the position.

It was the handlebars of the bicycle that was the clue
My commuting bike is a HONDA CB400SF [NC31].The mileage is over 100,000km, but it is still my partner who runs well.The prototype was tested on CB400SF at first.

Because the position cannot be adjusted with a standard handlebar, this completely new shaped one has been considered.It must be able to adjust the height and width.After a lot of research, there were no adjustable bike handles on the market that could give us a clue, and development was difficult.
At that time, World Walk got a hint from a bicycle that a staff member rode to the office.The staff rode a single speed bike with a handlebar that can be changed in height.
Although the structure of a motorcycle and a bicycle is different, their parts are similar, and the mechanism to adjust the height of the handlebar of a bicycle can be applied to the parts of a motorcycle.

World Walk has designed a new type of handlebar from scratch
The development speed was accelerated by the hint of the bicycle handlebar.This handlebar was developed with a completely different idea from existing products, and it required to draw a drawing from scratch and produced a sample.First of all, please check out the shape World Walk has arrived at after much effort.

This is the ideal handlebar shape that World Walk has arrived at.The sample was installed on CB400SF [NC31] for a test. As a result, it is found that you can adjust the position from sporty position to relaxed position to fit you perfectly.

Made of aluminum
The handlebar is made of aluminum, which is lightweight and strong.It is made of aluminum, which is 1/3 of the weight of steel and deforms less than steel when the same force is applied.The screws used for fixing are stainless steel bolts, which are less likely to corrode or rust.

POINT 1
■Height can be adjusted by 32mm
The height of the handlebar can be adjusted vertically within a range of 32mm.The sensation of wearing it at the top and at the bottom is so different that it is hard to believe that it is only 32mm.If you install it at the lowest position, you can lean forward slightly and have a sporty position.On the other hand, the uppermost position is more comfortable and roomy for riders with short arms.

POINT 2
■The width of the handlebar can be adjusted by approximately 22mm
The range of adjustment varies depending on the width of the switch box, but it can be adjusted by about 22mm.If both handles are adjusted, the adjustment range will be 44mm.The difference between the widest handlebar width and the shortest is 44mm as mentioned above, but when mounted on a larger bike, the handling feel is completely different.

POINT 3
■The angle of the handlebar can be adjusted
The angle of the handlebar can be adjusted from straight to narrow without interfering with the vehicle body.The angle of the handlebar greatly affects the width of the handlebar and the position of the handlebar, so just a small adjustment will make a big difference in the steering feeling.

POINT 4
■If you put the handlebar clamps on the left and right side in reverse, you can install them further
The handlebar width can be made even narrower than expected by mounting the handlebar clamps on the left and right sides of the bike.This is the best position for those who have to ride on narrow roads on a daily basis.