【attachment - Accuracy】 Installation is processed etc etc. It was easy and it was possible to Smooth without any. Instruction Manual Although there was also Tandem Footpeg interfere with Exhaust Bracket, (Using YOSHIMURARear Sets) Although it can not be installed at the moment, it seems that Clear can be done by changing the shape of the Bracket or adding Color on the footpeg side. I think whether it can be attached without problems if NITRO RACINGRear Sets of the same Manufacturer.
【Performance - function - Sound quality】 Although it is a test drive though it is impressive, Smooth feeling of acceleration accelerates from Smooth to low speed from low speed to high speed. When using Baffle, the sound is bass, so it is not noisy so far, but when I tried running with Baffle removed, it was a deep bass and a considerable volume. However, I felt that the low speed had got missed so I brought it back to Baffle. Balance is good with Blowle Yes swimming and accelerating Smooth.
【quality - Texture】 First of all it is the Exhaust pipe that comes into my eyes as soon as it is seen. Exhaust pipe which carefully connected more than 100 Parts by welding is Image which is totally different from other machine bended and Hand Bent, and it will be worth seeing too much beauty! After this, baked color sticks I'm looking forward to it.
【Cost performance】 Again, it is slightly expensive than other MODEL of the other Manufacturer, but I decided to purchase thinking that it is worth it.
- Sale
2,782.66 USD (412,881 JPY) 2,917.45 USD Save 5%
Delivery Information
-
Please select product form first.
Product detail
・Exhaust Pipe Material: Titanium
・Silencer material: Titanium
・Assembly method: 4in1
[Size]
・Exhaust pipe diameter: Φ42.7
・Tail pipe outer diameter: Φ60.5
[Set components]
・Exhaust pipe per vehicle
・Assembly part
・Tailpipe
・8 springs
・Silencer
・End baffle
・Silencer band
・Silencer Bracket
[Maintenance Data]
・Drain bolt: Available
・Change oil filter: Manifold section needs to be detached
・Center stand: Not available
*
*Installation image and product configuration are for reference only.
*The end baffle is pre-installed on the silencer at the time of shipment.
*NITRO RACING Rearset KIT is required to install this product.
*Some types of blinkers may interfere with silencers.In this case, you will need to replace the blinkers.
*Conical titanium silencers V-1 / V-2 / V-3 do not come with a silencer band as a bracket is pre-installed.
*The exhaust bracket of the vehicle shown in this page is the original one.The exhaust bracket included with the KIT is a pipework shape.
*NEVER remove the silencing baffle from the NITRO RACING silencer.It is also recommended to check and overhaul the silencer's internal sound deadening wool on a regular basis.
It is forbidden to drive on public roads with the end baffles removed.
*CB750F: In the case of using with the third party's Oil Cooler KIT, it may interfere with the fitting of the oil pan side.In this case, it is necessary to change the fitting angle to a different one and adjust it so that it does not interfere with the exhaust.
*CB900F / 1100F: This product cannot be used in conjunction with the stock oil cooler KIT, so it is necessary to change to an third party's oil cooler KIT.At this time, please make sure that the fitting parts on the oil pan side do not interfere with the exhaust.If interference is observed, it is necessary to replace the fitting with one that has a different angle and adjust it so that there is no interference.
* Please note in advance that cancellation and/or return of this product cannot be accepted once the order has been placed..
* This item can not be cancelled, returned nor exchange after placing an order.
* The image is only for reference. The image shown may differ from the actual product.
Weld EX series designed exclusively for R.C.M
The NITRO RACING Weldcraft 3D Titanium EX Series is made by painstakingly joining over 100 pieces of pipe to minimize the slightest distortion in the bending process.
It is a commitment to roundness that prioritizes exhaust efficiency without regard to cost.
The road clearance and bank angle are proof of the pursuit of the elements required for a exhaust.
Specially machined spring locking flange.
All for the best machine.
Points of Attention
* If there may be an instruction manual included, it will be written in Japanese.
NEW ARRIVALS IN USED PARTS FOR
NEW ARRIVALS IN USED PARTS FOR
NEW ARRIVALS IN USED PARTS FOR
New arrivals in used
New arrivals in used
Customer Reviews
Reviews with image
Fits:SUZUKI GSX1100S KATANA
Jul 17, 2016
Exhaust pipe connected by welding is the highest quality feeling!
New Custom Articles
