109.07 USD (16,183 JPY)
Delivery Information
-
Please select product form first.
FITMENT
-
Universal
-
Universal
-
Universal
-
Universal
Product detail
**The wiring in the image may vary depending on the specifications.It will be read from the installation CD.
*Knowledge of the vehicle's electrical system is required for installation.Webike is not able to answer technical questions..
.
* The image is only for reference. The image shown may differ from the actual product.
It is possible to rewrite the programs of the DYNA2000, such as the ignition advancer/retardation program, rev limit setting value, and ARP setting value, as well as to download the statistics of engine starting, maximum engine speed, and total engine starting time using a PC (WINDOWS-2000/XP).The kit includes an installation CD [8cm / 3 inch CD, CD3] and a connection harness.
Advance/retard programs can be rewritten in 10 steps using one type of curve program in increments of 50 rpm from 100 rpm to 16000 rpm, and increments of 1 degree from 1 degree to 34 degrees.This program can produce up to four different curves.You can also name and save your curves to your computer.*When using the PC program, the advance program of the DYNA2000 main unit will be erased and the advance dial 5 cannot be used.
The rev limit program can be rewritten every 100 rpm up to 16000 rpm.*When using the PC program, the rev limit dial of the DYNA2000 main unit cannot be used.
By rewriting the ARP program, it is possible to start or stop the control parts connected optionally every 100 rpm up to 16000 rpm at the rotation value set arbitrarily.
The data log program can read the number of engine starts (1 count for 2 minutes or more), the total hours of engine operation, the total hours of rev limit operation, and the total hours of each speed at every 500 rpm.Of course, the accumulated records can be reset.
If you are not sure about the setting, you can re-input the DYNATEK original advance program stored in your PC, or you can use your PC to operate the advance and rev limit dials of the DYNA2000 to make the setting.
Points of Attention
* If there may be an instruction manual included, it will be written in Japanese.
NEW ARRIVALS IN USED PARTS FOR
NEW ARRIVALS IN USED PARTS FOR
NEW ARRIVALS IN USED PARTS FOR
New arrivals in used
New arrivals in used
Customer Reviews
There are no Customer Review yet.
New Custom Articles
