MOTO HACK: Better Riding Performance and Fuel Efficiency! Let’s Adjust the Chain!

1601469565219L-680x510-1.jpg How to

Here are some of the maintenance methods we’ve received from the Webike Community "MOTO HACK Maintenance" campaign that we’d like to refer to. Maybe you have an idea you'd like to try!

In this issue, I'm going to introduce the maintenance HACK from Mr. Yuu who rides Ninja1000.

Introduction of the motorcycle and its maintenance

About the motorcycle

1601172146005L-2.jpg

The 2019 NINJA 1000
Most of its use is for touring.

This work

Drive Chain Adjustment
After 1,000 to 2,000 km, work at the same time as cleaning the chain.

Working hours

15 minutes.

Working difficulty

Simple

Items to use

Hexagonal wrench (8 mm)/12mm)
Brand: TONE

3/8 Inch (9.5mm) Torque Wrench TW7112E
Brand: PWT

Rear maintenance stand

Learn more about the work

[Work Process]
1601469565219L.jpg 1) Lift the rear tire on the maintenance stand.

2) Rotate the tire and find the position where the chain is most taut, and make it the reference point.

(3) Check that the eccentric scales are in the same position on both sides. (If they are not, adjust them first.)

4) Loosen the fixing bolts at the end of the swing arm on both sides.
1601469565398L.jpg

5) Next, insert the wrench into the adjuster part.

6) Move the wrench and adjust the chain tension to the specified value of 20mm30mm.

(7) Check again that the eccentric scale is in the same position on both sides.
1601469565528L.jpg

8)Tighten the fixing bolts at the end of the swing arm to 64N-m on both sides.
1601469565655L.jpg

9) Remove the maintenance stand and you are done.

Advice

When adjusting the drive chain, it should not be too tight or too loose, so check the maintenance book and adjust it to stay within the specified range. If the drive chain becomes loose, you will hear a loud rattling sound, feel a loss of power, or experience a loss of fuel economy, so it is necessary to check the drive chain.

Adjusting the drive chain is relatively easy and quick, and should be done at the same time as the drive chain cleaning operation to maintain the performance of the vehicle and to prolong the life of the drive chain and sprockets.

Thank you, Yuu, for posting this valuable maintenance HACK! You will receive 1,500 points to be used at Webike!

*The articles on MOTO HACK are composed and reprinted from user contributions. The effects and methods described are at the discretion of the user, and Webike is not responsible for any problems that may occur.

See Accessories of TONE
See Accessories of ETHOS
See KAWASAKI Moto Index Page
See Accessories for KAWASAKI Ninja1000 (Z1000SX)

タイトルとURLをコピーしました