Model Name:STEED600
Manufacturer:HONDA
Model Year:1988
It was a cruiser model that had an elaborated frame design and a swing arm structure. Its engine was wrapped around with a triangular silhouette frame. The suspension was stored under the seat to make the rear have a rigid style.
Specifications:
[Basic spec]
| Manufacturer | HONDA | Engine Type | Water-Cooled 4 Cycle OHC 3-Valve V-Shaped 2 Cylinder |
|---|---|---|---|
| Model Name | STEED600 | Starter | - |
| Grade | - | Maximum Output (ps) | 30ps(22kw)/7500rpm |
| Drive Train | - | Maximum Torque (kgf/m) | 3.3kg-m(32.4N-m)/5500rpm |
| Model Type | PC21 | Curb Weight | 208 |
| Displacement | 583 | Dry Weight | 205(Approximate Value) |
| Sales Launch Year | 1988/0 | Fuel Efficiency by Catalog | - |
| Height/Width/Length | 1130/-/2310 | Fuel Tank Capacity | - |
| Seat Height | - | Distance to Empty | - |
| Front Tire Indication | 100/90-19 57S | Fuel Supply | Carburetor |
| Rear Tire Indication | 170/80-15 77S WT |
[Service data]
| Standard Plug | DPR7EA-9 | Chain Size | 525 |
|---|---|---|---|
| Number of Used Plugs | 4 | Chain Link Number | 120 |
| Engine Oil Amount | - | Battery Code | - |
| Engine Oil (Refill) | 2.1L | Headlight | 12V 60w/55w |
| Engine Oil (Element Replacement) | 2.25L | Headlight Type | H4 |
| Front Blinker Rating | 12V 23w/8w | Headlight Remarks | - |
| Drive Sprocket Teeth Number | 16 | Tail Light Rating | 12V 23w/8w |
| Driven Sprocket Teeth Number | 45 | Rear Blinker Rating | 12V 23w |
[Machine detail]
| Motor Model Code | PD06E | Caster Angle | - |
|---|---|---|---|
| Bore (mm) | - | Trail (mm) | - |
| Storke (mm) | - | Minimum Ground Clearance | - |
| Compression Ratio | - | Distance Between Axes | - |
| Ignition Method | - | Streering Angle (Right) | - |
| Engine Lubrication Type | - | Turning Angle (Left) | - |
| Frame Type | - | Mirror Screw Hole Diameter | 10mm |
| Minimum Rotaion Radius | - | Fuel Tank Reserve Capacity | - |
[Underbody detail]
| Front Brake Type | Single Disc | Suspension Type (Rear) | - |
|---|---|---|---|
| Front Brake Remarks | - | Number of Rear Shock Absorbers | - |
| Rear Brake Type | Drum | Rear Suspension Stroke | - |
| Rear Brake Remarks | - | Rear Wheel Travel | - |
| Suspension Type (Front) | - | ABS | - |
| Front Fork Type | - | Drive Train | Chain |
| Front Suspension Stroke | - | Differential Oil Amount | - |
| Front Fork Diameter | - | Chain Remarks | - |
[Equipment]
| Seat Lowering Allowance | - | Theft Prevention Device | - |
|---|---|---|---|
| Mirror Screw Hole Diameter | 10mm | Tail Light Bulb Type | S25 |
| Mirror Remarks | - | Tail Light Base Shape | BAY15D |
| Electronic Device Remarks | - | Tail Light Base Shape 2 | - |
| Fuel Gauge | - | Tail Light Remarks | - |
| Clock | - | Front Blinker Bulb Type | S25 |
| Hazard | - | Front Blinker Base Shape | BAY15D/BA15S |
[Engine detail]
| Clutch Type | - | Tappet Clearance (mm) EX | - |
|---|---|---|---|
| Transmission | - | Idling Initial Value (rpm) | - |
| Number of Gears | - | Needle Steps (Clip Location) | - |
| Gear Ratio | - | Float Level (mm) | - |
| Primary Reduction Ratio | - | Air Screw Return | - |
| Secondary Reduction Ratio | 2.813 | Main Jet Type | KEIHIN Round Large (E) |
| Variable Speed Vehicle Gear Ratio | - | Main Jet Number | #95 |
| Tappet Clearance (mm) IN | - |
[Other spec]
| Clutch Cable Length | 1030 | Rear Brake Cable Length | - |
|---|---|---|---|
| Choke Cable Length | - | Other Cables | Direct (L)1020 |
| Meter Cable Length | 1000 | Engine Number (Production Launch) | - |
| Throttle Cable Length | 880/880 | Engine Number (Production End) | - |
| Front Brake Cable Length | Direct (L)1020 |
[See Moto Index of HONDA]
[See Accessories for HONDA STEED600]
