Model Name:HORNET 600
Manufacturer:HONDA
Model Year:1998
It had the mono-backbone engine hanger like 250 model. The water-cooled straight 4 engine was based on the ones of CBR600F, and its intake was narrowed down from Φ36 to Φ34 to maintain its balance.
Specifications:
[Basic spec]
| Manufacturer | HONDA | Engine Type | Water-Cooled 4 Stroke DOHC 4-Valve Straight 4 Cylinder |
|---|---|---|---|
| Model Name | HORNET 600 | Starter | - |
| Grade | - | Maximum Output (ps) | 69ps(51kw)/11500rpm |
| Drive Train | - | Maximum Torque (kgf/m) | 5.3kg-m(52.0N-m)/7500rpm |
| Model Type | PC34 | Curb Weight | 195 |
| Displacement | 599 | Dry Weight | 191(Approximate Value) |
| Sales Launch Year | 1998/0 | Fuel Efficiency by Catalog | - |
| Height/Width/Length | 1055/-/2040 | Fuel Tank Capacity | - |
| Seat Height | - | Distance to Empty | - |
| Front Tire Indication | 130/70ZR16 61W TL | Fuel Supply | Carburetor |
| Rear Tire Indication | 180/55ZR17 73W TL |
[Service data]
| Standard Plug | CR8EH-9 | Chain Size | 525 |
|---|---|---|---|
| Number of Used Plugs | 4 | Chain Link Number | 110 |
| Engine Oil Amount | - | Battery Code | FTX7L-BS |
| Engine Oil (Refill) | 3.5L | Headlight | 12V 60w/55w |
| Engine Oil (Element Replacement) | 3.8L | Headlight Type | H4 |
| Front Blinker Rating | 12V 18w/5w | Headlight Remarks | - |
| Drive Sprocket Teeth Number | 15 | Tail Light Rating | 12V 23w/8w |
| Driven Sprocket Teeth Number | 40 | Rear Blinker Rating | 12V 15w |
[Machine detail]
| Motor Model Code | PC25E | Caster Angle | - |
|---|---|---|---|
| Bore (mm) | - | Trail (mm) | - |
| Storke (mm) | - | Minimum Ground Clearance | - |
| Compression Ratio | - | Distance Between Axes | - |
| Ignition Method | - | Streering Angle (Right) | - |
| Engine Lubrication Type | - | Turning Angle (Left) | - |
| Frame Type | - | Mirror Screw Hole Diameter | 10mm |
| Minimum Rotaion Radius | - | Fuel Tank Reserve Capacity | - |
[Underbody detail]
| Front Brake Type | Double Disc | Suspension Type (Rear) | - |
|---|---|---|---|
| Front Brake Remarks | - | Number of Rear Shock Absorbers | - |
| Rear Brake Type | Disc | Rear Suspension Stroke | - |
| Rear Brake Remarks | - | Rear Wheel Travel | - |
| Suspension Type (Front) | - | ABS | - |
| Front Fork Type | - | Drive Train | Chain |
| Front Suspension Stroke | - | Differential Oil Amount | - |
| Front Fork Diameter | - | Chain Remarks | - |
[Equipment]
| Seat Lowering Allowance | - | Theft Prevention Device | - |
|---|---|---|---|
| Mirror Screw Hole Diameter | 10mm | Tail Light Bulb Type | S25 |
| Mirror Remarks | Genuine Adapter: Type D | Tail Light Base Shape | BAY15D |
| Electronic Device Remarks | - | Tail Light Base Shape 2 | - |
| Fuel Gauge | - | Tail Light Remarks | - |
| Clock | - | Front Blinker Bulb Type | T20 |
| Hazard | - | Front Blinker Base Shape | Wedge (Large/Double), Wedge (Middle) |
[Engine detail]
| Clutch Type | - | Tappet Clearance (mm) EX | - |
|---|---|---|---|
| Transmission | - | Idling Initial Value (rpm) | - |
| Number of Gears | - | Needle Steps (Clip Location) | - |
| Gear Ratio | - | Float Level (mm) | - |
| Primary Reduction Ratio | - | Air Screw Return | - |
| Secondary Reduction Ratio | 2.667 | Main Jet Type | KEIHIN Round Large (E) |
| Variable Speed Vehicle Gear Ratio | - | Main Jet Number | #95+#100 |
| Tappet Clearance (mm) IN | - |
[Other spec]
| Clutch Cable Length | 930 | Rear Brake Cable Length | 640 |
|---|---|---|---|
| Choke Cable Length | 780 | Other Cables | Direct (R)750/(L)800 |
| Meter Cable Length | - | Engine Number (Production Launch) | - |
| Throttle Cable Length | 805/810 | Engine Number (Production End) | - |
| Front Brake Cable Length | Direct (R)750/(L)800 |
[See Moto Index of HONDA]
[See Accessories for HONDA HORNET 600]
