Model Name:PRESS CUB 50
Manufacturer:HONDA
Model Year:2005
It was designed based on the SUPER CUB 50. It was a motorcycle for newspaper delivery use, and was equipped with a front basket, a large rear carrier, a headlight with a blinker in front of the basket, a reinforced side stand, an exclusive 2.50 rear tire, and a reinforced chain with special grease applied. In order to cope with the newspaper delivery task which needs to start and stop the engine repeatedly, it came with a 3-speed rotary change structure, that enabled the rider directly put back the gear to the neutral position from the top gear. It also had a pre-wiring for the installation of the separately sold alarm kit. It adopted a recycling sticker from the minor change and the price was raised by 1000yen.
Specifications:
[Basic spec]
| Manufacturer | HONDA | Engine Type | Air-Cooled 4 Cycle OHC Single Cylinder |
|---|---|---|---|
| Model Name | PRESS CUB 50 | Starter | Kick Starter |
| Grade | Standard | Maximum Output (ps) | 4.0ps(2.9kw)/7000rpm |
| Drive Train | - | Maximum Torque (kgf/m) | 0.48kg-m(4.7N-m)/4500rpm |
| Model Type | AA01 | Curb Weight | 79 |
| Displacement | 49 | Dry Weight | 75 |
| Sales Launch Year | 2005/9 | Fuel Efficiency by Catalog | 130.0 km/L (at 30 km/h) |
| Height/Width/Length | 1010/-/1800 | Fuel Tank Capacity | 4 |
| Seat Height | 735 | Distance to Empty | - |
| Front Tire Indication | 2.25-17 33L | Fuel Supply | Carburetor |
| Rear Tire Indication | 2.25-17 33L |
[Service data]
| Standard Plug | CR6HSA | Chain Size | 420 |
|---|---|---|---|
| Number of Used Plugs | 1 | Chain Link Number | 98 |
| Engine Oil Amount | 0.8 | Battery Code | YT4L-BS |
| Engine Oil (Refill) | 0.6L | Headlight | 12V 30w/30w |
| Engine Oil (Element Replacement) | - | Headlight Type | PH7 |
| Front Blinker Rating | 12V 10w | Headlight Remarks | - |
| Drive Sprocket Teeth Number | 13 | Tail Light Rating | 12V 18w/5w |
| Driven Sprocket Teeth Number | 40 | Rear Blinker Rating | 12V 10w |
[Machine detail]
| Motor Model Code | AA01E | Caster Angle | 26.5 Degrees |
|---|---|---|---|
| Bore (mm) | 39 | Trail (mm) | 75 |
| Storke (mm) | 41.4 | Minimum Ground Clearance | - |
| Compression Ratio | 10 | Distance Between Axes | - |
| Ignition Method | CDI Type Magnet Ignition | Streering Angle (Right) | - |
| Engine Lubrication Type | Force Feeding & Splash | Turning Angle (Left) | - |
| Frame Type | Backbone Frame | Mirror Screw Hole Diameter | 8mm |
| Minimum Rotaion Radius | 1.8 | Fuel Tank Reserve Capacity | - |
[Underbody detail]
| Front Brake Type | Mechanical Leading/Trailing | Suspension Type (Rear) | Swing Arm |
|---|---|---|---|
| Front Brake Remarks | - | Number of Rear Shock Absorbers | - |
| Rear Brake Type | Mechanical Leading Trailing | Rear Suspension Stroke | - |
| Rear Brake Remarks | - | Rear Wheel Travel | - |
| Suspension Type (Front) | Bottom Link | ABS | - |
| Front Fork Type | - | Drive Train | Chain |
| Front Suspension Stroke | - | Differential Oil Amount | - |
| Front Fork Diameter | - | Chain Remarks | - |
[Equipment]
| Seat Lowering Allowance | - | Theft Prevention Device | - |
|---|---|---|---|
| Mirror Screw Hole Diameter | 8mm | Tail Light Bulb Type | T20 |
| Mirror Remarks | OEM Adapter: Type C | Tail Light Base Shape | Wedge (Large W) |
| Electronic Device Remarks | - | Tail Light Base Shape 2 | - |
| Fuel Gauge | Available | Tail Light Remarks | BA15s depending on MY. Some may have G18 18w/5w glass shape. |
| Clock | - | Front Blinker Bulb Type | T13 |
| Hazard | - | Front Blinker Base Shape | - |
[Engine detail]
| Clutch Type | Wet Multiple Plate Coil Spring | Tappet Clearance (mm) EX | - |
|---|---|---|---|
| Transmission | Permanently Engaged 3-Stage Normal Shift | Idling Initial Value (rpm) | - |
| Number of Gears | 3 | Needle Steps (Clip Location) | - |
| Gear Ratio | 3.272 / 1.764 / 1.190 | Float Level (mm) | - |
| Primary Reduction Ratio | 4.058 | Air Screw Return | - |
| Secondary Reduction Ratio | 3.077 | Main Jet Type | - |
| Variable Speed Vehicle Gear Ratio | - | Main Jet Number | #70, #75 |
| Tappet Clearance (mm) IN | - |
[Other spec]
| Clutch Cable Length | - | Rear Brake Cable Length | - |
|---|---|---|---|
| Choke Cable Length | - | Other Cables | - |
| Meter Cable Length | - | Engine Number (Production Launch) | - |
| Throttle Cable Length | - | Engine Number (Production End) | - |
| Front Brake Cable Length | - |
[See Moto Index of HONDA]
[See Accessories for HONDA PRESS CUB 50]
