Easier than Painting. How to Use Gloss Revitalizer to Make Crusty White Resin Parts Shine

Use of a luster revival agent specially designed for black resin and unpainted parts will bring back the natural luster.

Remove dirt, mud, dust, and oil from the spray area, and spray evenly from a distance of 5 to 10 cm.
As with regular spray paint, work in thin layers rather than applying a thick coat at a time.

Some gloss enhancers can be spread with a sponge, but for large areas such as fenders, the canned spray type can be applied more efficiently and evenly. On the other hand, sponge application is more efficient for small parts and small areas, so it is best to use the right product for the right job.

Colored PP differs from the painted exterior of ABS in the way it loses its color, so when it fades, it becomes as shabby as black PP. Depending on the type of silicone spray, it may be absorbed into the surface and not settle, resulting in a half-finished product that remains crumbly and shiny.

Y's Gear's gloss revitalizer has a film thickness similar to that of clear paint, and the roughness is completely eliminated.
If you want the same finish as clear paint, you have to carefully prepare the surface, but this gloss revival agent can be easily applied after degreasing and cleaning.

While silicone sprays from home centers have various characteristics depending on their applications and require careful attention to heat repair, the easiest way to repair whitened parts is with gloss revivals specialized for PP repair. The plastic gloss revivifier introduced here is a product of Y's Gear and is characterized by the fact that it was developed for use on motorcycle parts. The main ingredients are silicone oil and petroleum solvents, so there is no major difference from silicone sprays sold at home centers. However, as mentioned earlier, while there are various types of silicone sprays, Wise Gear has developed this product specifically for reviving the luster of PP parts for motorcycles, and the easy handling of the spray with less dripping and the semi-glossy black finish with a high texture is as expected.

It works well with black PP as well as colored PP and has restored natural luster to front fenders that had faded and looked shabby. The spray is left to dry naturally after application, but any differences caused by spraying too close to the part or spraying too hard can be wiped off with a rag. However, unlike paint, the gloss revivifier can be sprayed even when the painted part is assembled on the car body, and there is no need to worry about the adverse effects of heat or work errors. There is no need to worry about the adverse effects of heat or work errors. For maintenance of whitened parts that may not have functional problems, but can significantly reduce the appearance of the car, why not use a gloss revival spray that is easy to use?