Clutch in WR 250X began to feel heavy, so I tried to replace it. Brake has a very rigid feeling and a good operation feeling. You can make it work well with two fingers. Clutch is still Short and it is not light as well. I am at a loss whether I am still two fingers or three fingers. I think that the operation feeling is good. Cospa is also nice..
View Detail
28.54 USD (4,235 JPY)
Webike Point: +42 pt
(0.28 USD)
Delivery Information
This item is discontinued.
FITMENT
YAMAHA
Open Fit Model Information Table
-
TT250R RAID
-
SEROW225 WE
-
SEROW225 W
-
SEROW225
See all
YAMAHA
Product detail
Model Number: Y-1
[Components] Right and left set
[Material] Carbide aluminum magnesium
* The image is only for reference. The image shown may differ from the actual product.
RALLY491 lever is the upgraded version of RALLY490 lever with non-slip coating.
Further enhanced functions while inheriting the excellent features of the 490 lever!The dimples on the levers prevent slippage in muddy races and rainy touring conditions, ensuring reliable lever work.
★Are you put off just because it's a short lever?
The rally lever is only one ball short of the stock lever.
It's a small thing, but it's easier to operate than the stock one, and it reduces the damage when you fall.
The short lever allows you to install handguards (bar end fixed type) which cannot be installed with the stock lever, and improves protection.
★Why Short Lever?
Why does RALLY insist on short lever?This is because RALLY short levers combine the advantages of short levers with the advantages of long levers, while overcoming the disadvantages of each.
The advantage of the long lever is that it is easier to operate the clutch because the fingers are placed outside the lever.
However, there are some disadvantages, such as the handguard cannot be attached, or the handguard is easily broken when falling.
The RALLY lever is designed so that the position of the fingers on the inside of the lever, which is the biggest disadvantage of short levers, is on the outside of the lever compared to stock short levers.
The operation is comparable to that of a long lever.
In addition, the shortness of the short lever, which is its greatest advantage, makes it easier to install the handguard and minimizes the possibility of damage in case of a fall.
For those who insist on long levers, the 492 series is also available.
Considering all these factors, the answer to the choice of the lever will be obvious.
Points of Attention
* If there may be an instruction manual included, it will be written in Japanese.
NEW ARRIVALS IN USED PARTS FOR
NEW ARRIVALS IN USED PARTS FOR
NEW ARRIVALS IN USED PARTS FOR
New arrivals in used
New arrivals in used
Customer Reviews
Reviews with image
Fits:YAMAHA BRONCO , YAMAHA DT125R , YAMAHA DT200R , YAMAHA DT230 LANZA (DT230) , YAMAHA SEROW250
Fits:YAMAHA BRONCO , YAMAHA DT125R , YAMAHA DT200R , YAMAHA DT230 LANZA (DT230) , YAMAHA SEROW250
Jul 5, 2017
I used to love it with CRF 250 L and purchased for SEROW this time, I will not break without noticing Cost, I will not slip without Let's complain this.
View Detail
Helpful?
Fits:YAMAHA BRONCO , YAMAHA DT125R , YAMAHA DT200R , YAMAHA DT230 LANZA (DT230) , YAMAHA SEROW250
Dec 7, 2016
NORMAL is also a pretty Short lever, but I also equipped a short finger with a finger.
Even if I change the car model, I have been using this Lever for about 20 years.
Helpful?
Fits:YAMAHA BRONCO , YAMAHA DT125R , YAMAHA DT200R , YAMAHA DT230 LANZA (DT230) , YAMAHA SEROW250
Dec 3, 2016
The feeling of use is not bad, and interference with hand guard can be prevented. Lever's Length is quite different even for the same product depending on the compatible model. It is fairly short for WR than for CRF. Because Clutch is heavy in WR, hands seem to be tired when heavy half clad is used heavily. Well, since the damage rate of Lever seems to fall considerably with Hand guard & Short lever, it is recommended for people going to the mountain.
View DetailHelpful?
Fits:YAMAHA BRONCO , YAMAHA DT125R , YAMAHA DT200R , YAMAHA DT230 LANZA (DT230) , YAMAHA SEROW250
Sep 12, 2016
I purchased NORMAL's Lever because it broke.
Finger Quantity by Short lever : I can operate with 2pc
It is fun.. I can make delicate adjustments for semi-clusters
Is good.
Helpful?
New Custom Articles
