HURRICANE :: Flat Continental Type-2 Φ7/8-Inches Handlebar Steel Customer Reviews

HONDA VTR250 03-07 MC33 (102201-)*Processing to drill switch hole|*Essential side cap (for 18mm I.D.)|*Mount the bar end up.
HONDA VTR250 09-12 MC33 (1300001-)(FI car) *Processing to drill switch hole is required|* Required side cap (for 18mm diameter)
YAMAHA XJR1300 07-12 (RP17J) *Processing to open switch hole required|* Required side cap (for 18mm ID)
YAMAHA SR400 88-00 (CV carburetor) *Processing to drill switch holes is required
YAMAHA XJR400R 01-07 RH02J *Processing to open switch hole required|*Side cap required (for 18mm diameter)
YAMAHA XJR1300 00-06 (RP03J) *Processing to open switch hole required|*Side cap required (for 18mm ID)
SUZUKI GRASS TRACKER 09-12 09-12(FI cars)*Side caps can be used with the stock ones.
SUZUKI GRASS TRACKER Big Boy -08 (Carburetor)*Drilling of switch holes is required. |*It is necessary to change the throttle cable
YAMAHA TW225E clutch cable and brake hose. |*It is necessary to change the direction of the brake banjo.
YAMAHA TW200 00- (Disc Brake Car) *Processing of switch hole is required
YAMAHA TW200E -99 (drum brakes)
YAMAHA TW200E -99 (drum brakes)
YAMAHA SR500 00- (Disc Brake Car) *Processing of switch hole is required
YAMAHA SR400 88-00 (CV carburetor) *Processing to drill switch holes is required
Others 01-12 (Carb/FI Disc Brake Car) *Processing of switch hole is required
SUZUKI GRASS TRACKER Big Boy Universal
SUZUKI GRASS TRACKER 09-12 (FI car)*You can use stock side caps.
SUZUKI ST250 E Type -08 (Carburetor)*Drilling of switch holes is required. |*It is necessary to change the throttle cable
KAWASAKI BALIUS clutch cable and brake hose. |*It is necessary to change the direction of the brake banjo.
KAWASAKI BALIUS2 -07 NJ4AA *Processing of switch holes required|* Normal side caps can be used.
SUZUKI GSR400 91-94 *Processing of switch hole required|* Required side cap (for 18mm diameter)
SUZUKI RV200 VANVAN *Requires drilling of switch hole|* Requires side cap (for 18mm diameter)
SUZUKI ST250 -12 *Ask to drill switch holes|* Normal side caps can be used.
SUZUKI GSX400 -07 NH41A Carburetor *Processing to open switch holes required|* The stock side caps can be used.
KAWASAKI ZEPHYRX -07 NJ4AA Carburetor *switch hole drilling required|*Side caps can be used for stock.
KAWASAKI ZEPHYR750 RS 05-07 GK7CA *Processing of the switch hole is required|* You can use the normal side cap.
KAWASAKI ZEPHYR400 *Requires drilling of switch hole|* Requires side cap (for 18mm diameter)
KAWASAKI ZEPHYR750 *Requires drilling of switch hole|* Requires side cap (for 18mm diameter)
HONDA CB400SUPER BOLDOR *Requires drilling of switch hole|* Requires side cap (for 18mm diameter)
HONDA CB750 *Requires drilling of switch hole|* Requires side cap (for 18mm diameter)
HONDA FTR223 05-07 NC39 *Processing of switch hole required|* Required side cap (for 18mm diameter)
HONDA FTR223 04- RC42 *Processing of switch hole required|* Required side cap (for 18mm ID)
HONDA NC700S (without side numbers) * Requires modification of the clutch cable and choke cable.
HONDA CB400SF (with side numbers) * Requires modification of the clutch cable and choke cable.
HONDA CB400SF 12 (except for ABS and DCT cars) *Processing of switch hole is required|* Required side cap (for 18mm diameter)
HONDA CB400SF 99-07 NC39 VTEC *Processing of the switch hole is required|* Required side cap (for 18mm ID)
HONDA CB400SF 99-07 NC39 VTEC III* requires drilling of switch hole|* requires side cap (for 18mm ID)
HONDA CB400SF 99-07 NC39 VTEC II* requires drilling of switch hole|* requires side cap (for 18mm ID)
HONDA CB400SS 08-21 NC42 VTEC Revo *Requires switch hole drilling|*Requires side cap (for inner diameter 18mm)
HONDA CB1300SUPER BOLDOR -98 NC31 *Processing of switch hole required|* Required side cap (for 18mm ID)
HONDA CB1300SUPER BOLDOR *Requires drilling of switch hole|* Requires side cap (for 18mm diameter)
KAWASAKI ESTRELLARSCustom 10-12 *Processing of switch holes required|* Required side cap (for 18mm ID)
KAWASAKI W400 05-09 *Processing of switch hole required|* Required side cap (for 18mm ID)
KAWASAKI W800 96-99 *Processing of switch hole required|* Required side cap (for 18mm ID)
KAWASAKI ZRX1100 *Required Switch Hole Drilled
KAWASAKI ZRX1100II *Required Switch Hole Drilled
KAWASAKI ZRX1200R *Requires drilling of switch hole| * Requires side cap (for 18mm diameter)
KAWASAKI ZrX1200ZrX1200 DAEG *Requires drilling of switch hole|* Requires side cap (for 18mm diameter)
KAWASAKI ZRX400 *Requires drilling of switch hole| * Requires side cap (for 18mm diameter)
KAWASAKI ZRX400II *Requires drilling of switch hole| * Requires side cap (for 18mm diameter)
KAWASAKI 250TR *Requires drilling of switch hole|* Requires side cap (for 18mm diameter)
HONDA MONKEY *Requires drilling of switch hole|* Requires side cap (for 18mm diameter)
HONDA HORNET250 -06 *Requires switch hole drilling|* Requires changing the orientation of the brake banjo and throttle holder.
HONDA MONKEY 84-07 (Z50J-1600008-|AB27-1000001-1899999)*With Top Bridge H30 Holder or MONKEY Handle Holder required
HONDA APE 50 *Need to drill switch hole
HONDA APE 50 09-12 (AB27-1900001-)(FI)(FI cars)* Requires Top Bridge H30 Holder or MONKEY Handle Holder|* Requires drilling of switch hole
HONDA APE 100 -07|08 (Carburetor)*APE100 (09-) only
HONDA CB1300 SF 08-12 (FI Drum Brake) *Processing of switch holes is required

4.1 (14 Reviews)

Excellent		3
Very good		10
Average		1
Poor		0
Terrible		0

Most Viewed Reviews for HURRICANE Flat Continental Type-2 Φ7/8-Inches Handlebar Steel

Jul 21, 2024

This is an easy-to-use Posit...

By Japanese Webike user (295215) From

[How is it used?I have it on my 250TR and use it for commuting.Was the one you received as per Image... Read More
Jun 2, 2024

Well-positioned

By Japanese Webike user (295215) From

I purchased this product because the Handlebar that was installed from the beginning did not fit.The... Read More
Oct 29, 2023

First Handlebar Replacement

By Japanese Webike user (295215) From

[How is it used?XJR400R (RH02J) I was looking for an external Handlebar to change the Spec. of the P... Read More
Jan 28, 2022

Replacement from Plating.

By Japanese Webike user (295215) From

This is a change from Plating of the same type.On the LeftGrip side, there is a paper seal with the ... Read More
Jul 9, 2020

I'm leaning forward more tha...

By Japanese Webike user (295215) From

The Yamaha Y's Gear, which is slightly lower than the NORMAL and is attached with Option:The SR Mode... Read More
Apr 7, 2020

Cheap is justice

By Japan User(translated) (295215) From

I got a raggedy VCR and the Handlebar that came with it was so lame SoI couldn't help but buy itAnd ... Read More
Sep 4, 2018

It is the best cospa

By Japan User(translated) (295215) From

A little less than the bar I've had so far Spec. I want to change and purchaseSince COSPA is exc... Read More
Nov 5, 2017

Reasonably priced bar. seems...

By Marc G JH (5) From

Reasonably priced item. Seems a fraction bigger than the stock parts. As a result the switch housing... Read More
Aug 16, 2016

Abundant satisfaction of HUR...

By Japan User(translated) (295215) From

I feel a lot like Handlebar and it seems to calm down at that time At the time I do not change it wi... Read More
Jun 15, 2016

I felt Handlebar a little ex...

By Japan User(translated) (295215) From

I attached it to RZ 350Originally it was Swallow handleWhat I was interested in is the height of the... Read More
View all reviews

14 Reviews Sort by

posted Jul 21, 2024This is an easy-to-use Position handleba...
By Japanese Webike user (295215)From
[How is it used?I have it on my 250TR and use it for commuting.Was the one you received as per Image?I was able to get an image of how much the position would change from the handlebar I was using, so...Read More
posted Jun 2, 2024Well-positioned
By Japanese Webike user (295215)From
I purchased this product because the Handlebar that was installed from the beginning did not fit.The slight up position and slightly narrow width of the seat is perfectly balanced and allows you to dr...Read More
posted Oct 29, 2023First Handlebar Replacement
By Japanese Webike user (295215)From
[How is it used?XJR400R (RH02J) I was looking for an external Handlebar to change the Spec. of the Pipe Handlebar of theWe chose this product based on Manufacturer, price, and fit information.Was the ...Read More
posted Jan 28, 2022Replacement from Plating.
By Japanese Webike user (295215)From
This is a change from Plating of the same type.On the LeftGrip side, there is a paper seal with the product number, ManufacturerMain and product name, which is still difficult to remove.If you could m...Read More
posted Jul 9, 2020I'm leaning forward more than NORMAL.
By Japanese Webike user (295215)From
The Yamaha Y's Gear, which is slightly lower than the NORMAL and is attached with Option:The SR Moderate Screen now stands out. It seems to be compatible with Posh-Classical Rear Sets though the run i...Read More
posted Apr 7, 2020Cheap is justice
By Japan User(translated) (295215)From
I got a raggedy VCR and the Handlebar that came with it was so lame SoI couldn't help but buy itAnd the texture is good and works fineIt's nice to have a low price and easy to buyRead More
posted Sep 4, 2018It is the best cospa
By Japan User(translated) (295215)From
A little less than the bar I've had so far Spec. I want to change and purchaseSince COSPA is excellent, I will try to purchase as much as I tryWhat is disappointing is the shape Quantity : Pair (f...Read More
posted Nov 5, 2017Reasonably priced bar. seems to scratch ...
By Marc G JH (5)From
Reasonably priced item. Seems a fraction bigger than the stock parts. As a result the switch housings and riser clamps appear to have more of a gap between them after installing this bar. The paint al...Read More
posted Aug 16, 2016Abundant satisfaction of HURRICANE shape
By Japan User(translated) (295215)From
I feel a lot like Handlebar and it seems to calm down at that time At the time I do not change it with the same Manufacturer There are times when it is not possible to compare what I should do next ti...Read More
posted Jun 15, 2016I felt Handlebar a little expensive
By Japan User(translated) (295215)From
I attached it to RZ 350Originally it was Swallow handleWhat I was interested in is the height of the HandlebarIn Swallow 's posture was stoopingThis person speaks somewhatThe position to sit a whi...Read More
posted Jan 10, 2016awesome handlebar, comfort in riding. gi...
By Peter G (16)From
awesome handlebar, comfort in riding. gives you a good posture when riding long distant. great item.fitted nicely for the bike.Read More
posted Nov 26, 2015Prefect lowered handle bar and the colou...
By Rizzie (124)From
Prefect lowered handle bar and the colour are nice finishing. Needed risers as too low and the switches hits the sides fairings n tank. Switches needed to drill as it do not comes together with holesRead More
posted Aug 23, 2015I want to get on forever
By Japan User(translated) (295215)From
I decided to make KATANA Up Handlebar from low back pain etc, but I thought that I do not want to break the style of Separate handle and purchased it.The diaphragm of OEMSeparate handle was about 40-D...Read More
posted Sep 10, 2013It will conceive from before for about t...
By Japan User(translated) (295215)From
It will conceive from before for about two years, and only a Handlebar is not able to be decided although the required Parts was purchased and prepared.Based on various information, it is decided that...Read More
posted May 23, 2012[Webike Monitor] by it being broad, and ...
By Japan User(translated) (295215)From
[Webike Monitor] by it being broad, and also hanging down to a Grip position and the angle being attached in case of the Handlebar attached with present vehicle,
A state is behind brought [ that a Kn...Read More
posted Aug 29, 2011It is the hurricane of two flat knots fo...
By Japan User(translated) (295215)From
It is the hurricane of two flat knots following an estrella. What the size is finely contained in the catalogue and it is easy to choose is good. The handle was changed and operativity rose. It is rec...Read More