HURRICANE :: BM Continental Type 3 Φ7/8 Inch Handlebar Steel Customer Reviews

HONDA CB1300SUPER BOLDOR 10-12 *Processing of switch holes required|* Required side cap (for 18mm ID)
HONDA CB1300SUPER BOLDOR 05-09 *Processing of switch hole required|* Required side cap (for 18mm ID)
HONDA CB1300 SF 03-09 *Processing of switch holes required|* Required side cap (for 18mm ID)
HONDA CB1100 -12 SC65 (Uphan model)
HONDA APE 50 -07|08 (Carburetor)*APE100 (09-) only
HONDA APE 50 08-12 (FI Drum Brake) *Processing of switch holes is required
HONDA APE 100 -12 (drum brake)*APE100 (09-) requires drilling of switch holes.
HONDA VTR250 09-12 MC33 (1300001-)(FI car) *Processing to drill switch hole is required|* Required side cap (for 18mm diameter)
HONDA NC700X 12 (Except DCT) *Processing to drill switch hole required|*Essential side cap (for 18mm diameter)
HONDA VTR250 03-07 MC33 (1020001-)*Processing of switch hole required|* Required side cap (for 18mm ID)
HONDA NC700S 12 (except for ABS and DCT cars) *Processing of switch hole is required|* Required side cap (for 18mm diameter)
HONDA FTR223 (with side numbers) * Requires modification of the clutch cable and choke cable.
HONDA CB750 04- RC42 *Processing of switch hole required|* Required side cap (for 18mm ID)
HONDA FTR223 (without side numbers) * Requires modification of the clutch cable and choke cable.
HONDA CB400SUPER BOLDOR 05-07 NC39 *Processing of switch hole required|* Required side cap (for 18mm diameter)
HONDA CB400SF 99-07 NC39 VTEC *Processing of the switch hole is required|* Required side cap (for 18mm ID)
HONDA CB400SF 99-07 NC39 VTEC II* requires drilling of switch hole|* requires side cap (for 18mm ID)
HONDA CB400SF 08-21 NC42 VTEC Revo *Requires switch hole drilling|*Requires side cap (for inner diameter 18mm)
HONDA CB400SF 99-07 NC39 VTEC III* requires drilling of switch hole|* requires side cap (for 18mm ID)
HONDA CB400SS *Requires drilling of switch hole|* Requires side cap (for 18mm diameter)
HONDA CB400SF -98 NC31 *Processing of switch hole required|* Required side cap (for 18mm ID)
SUZUKI ST250 -07 NJ4AA Carburetor *switch hole drilling required|*Side caps can be used for stock.
SUZUKI GSR400 -12 *Ask to drill switch holes|* Normal side caps can be used.
SUZUKI RV200 VANVAN -07 NH41A Carburetor *Processing to open switch holes required|* The stock side caps can be used.
KAWASAKI BALIUS2 *Requires drilling of switch hole|* Requires side cap (for 18mm diameter)
KAWASAKI ZEPHYRX *Requires drilling of switch hole|* Requires side cap (for 18mm diameter)
KAWASAKI ZEPHYR750 *Requires drilling of switch hole|* Requires side cap (for 18mm diameter)
KAWASAKI ZEPHYR750 RS *Requires drilling of switch hole|* Requires side cap (for 18mm diameter)
KAWASAKI ZEPHYR1100 RS *Requires drilling of switch hole|* Requires side cap (for 18mm diameter)
KAWASAKI ZEPHYR400 *Requires drilling of switch hole|* Requires side cap (for 18mm diameter)
KAWASAKI ESTRELLARSCustom 96-99 *Processing of switch hole required|* Required side cap (for 18mm ID)
KAWASAKI ZEPHYR1100 *Requires drilling of switch hole|* Requires side cap (for 18mm diameter)
KAWASAKI ZRX400 *Requires drilling of switch hole|* Requires side cap (for 18mm diameter)
KAWASAKI ZRX400II *Requires drilling of switch hole|* Requires side cap (for 18mm diameter)
KAWASAKI ZrX1200ZrX1200 DAEG *Requires drilling of switch hole| * Requires side cap (for 18mm diameter)
KAWASAKI ZRX1200R *Requires drilling of switch hole| * Requires side cap (for 18mm diameter)
KAWASAKI ZRX1100II *Requires drilling of switch hole|* Requires side cap (for 18mm diameter)
KAWASAKI W800 *Need to drill a switch hole
KAWASAKI ZRX1100 *Requires drilling of switch hole| * Requires side cap (for 18mm diameter)
KAWASAKI W400 *Required Switch Hole Drilled
HONDA MONKEY 84-07 (Z50J-1600008-|AB27-1000001-1899999)*With Top Bridge H30 Holder or MONKEY Handle Holder required
KAWASAKI 250TR -06 *Requires switch hole drilling|* Requires changing the orientation of the brake banjo and throttle holder.
HONDA HORNET250 *Requires drilling of switch hole|* Requires side cap (for 18mm diameter)
HONDA MONKEY 09-12 (AB27-1900001-)(FI)(FI cars)* Requires Top Bridge H30 Holder or MONKEY Handle Holder|* Requires drilling of switch hole
YAMAHA XJR400R 01-07 RH02J *Processing to open switch hole required|*Side cap required (for 18mm diameter)
YAMAHA XJR1300 00-06 (RP03J) *Processing to open switch hole required|*Side cap required (for 18mm ID)
YAMAHA XJR1300 07-12 (RP17J) *Processing to open switch hole required|* Required side cap (for 18mm ID)
YAMAHA TW200E 00- (Disc Brake Car) *Processing of switch hole is required
YAMAHA TW225E 00- (Disc Brake Car) *Processing of switch hole is required
YAMAHA TW200 -99 (drum brakes)
YAMAHA TW200E -99 (drum brakes)
YAMAHA SR500 88-00 (CV carburetor) *Processing to drill switch holes is required
YAMAHA SR400 88-00 (CV carburetor) *Processing to drill switch holes is required
Others Universal
YAMAHA SR400 01-12 (Carb/FI Disc Brake Car) *Processing of switch hole is required
SUZUKI GRASS TRACKER Big Boy 09-12 (FI car)*You can use stock side caps.
SUZUKI GRASS TRACKER 09-12 09-12(FI cars)*Side caps can be used with the stock ones.
SUZUKI GRASS TRACKER Big Boy -08 (Carburetor)*Drilling of switch holes is required. |*It is necessary to change the throttle cable
SUZUKI GSX400 clutch cable and brake hose. |*It is necessary to change the direction of the brake banjo.
SUZUKI GRASS TRACKER 05-07 GK7CA *Processing of the switch hole is required|* You can use the normal side cap.
SUZUKI ST250 E Type -08 (Carburetor)*Drilling of switch holes is required. |*It is necessary to change the throttle cable

4.8 (6 Reviews)

Excellent		5
Very good		1
Average		0
Poor		0
Terrible		0

Most Viewed Reviews for HURRICANE BM Continental Type 3 Φ7/8 Inch Handlebar Steel

Nov 9, 2018

HURRICANE BM Continental 3 T...

By NO NAME (5) From

Been using this handlebar for a few months and it is much better than my previous wide handlebar. Th... Read More
Aug 22, 2024

Good handlebar at a great pr...

By Motopsycho (8) From

I wanted a narrower lower handlebar for my SR500. This one is economical, fits great and the chrome ... Read More
May 27, 2024

Hurricane HB0041B-01. Hurric...

By NO NAME (5) From

Item ordered on 24th. Mailed on 25th. Reached Singapore on 27th. Japan efficiency . Itwm bubble wrap... Read More
Apr 25, 2024

Best Match for Good Position...

By Japanese Webike user (295215) From

The handlebar on my XSR125 did not fit and my shoulder stiffness got worse after the first ride, so ... Read More
May 21, 2023

Handlebar replacement for SV...

By Japanese Webike user (295215) From

For handlebar replacement, it is necessary to drill a hole to hold the switch in place.The SV is eve... Read More
Sep 18, 2022

Quality is fine

By Japanese Webike user (295215) From

I use it on my GIXXER250. 20mm up on the riser to adjust the height, and the Riding Position is much... Read More
Apr 15, 2020

I think I failed to use it o...

By Japan User(translated) (295215) From

I've been using the EZ-FIT-Bar, but I just need a little more height! And greedyI purchased this pro... Read More
Nov 12, 2017

This is the limit.

By Japan User(translated) (295215) From

Since it was 163 cm and Small handle, I felt Handlebar was a bit far and low, so I exchanged it. Har... Read More
Apr 17, 2017

Shape Material is both good ...

By Japan User(translated) (295215) From

ZEPHYR750 (2001 type) I bought it because the OEMHandlebar was a little crooked.The Handlebar I boug... Read More
View all reviews

6 Reviews Sort by

posted Aug 22, 2024Good handlebar at a great price.
By Motopsycho (8)From
I wanted a narrower lower handlebar for my SR500. This one is economical, fits great and the chrome is top quality. I will be considering the Hurricane brand from now on when shopping for handlebars.Read More
posted May 27, 2024Hurricane HB0041B-01. Hurricane HB0349B....
By NO NAME (5)From
Item ordered on 24th. Mailed on 25th. Reached Singapore on 27th. Japan efficiency . Itwm bubble wrapped and boxed. No damages .Read More
posted Apr 25, 2024Best Match for Good Position XSR125.
By Japanese Webike user (295215)From
The handlebar on my XSR125 did not fit and my shoulder stiffness got worse after the first ride, so I replaced it with this handlebar based on Net information.I also bought a Flat continental2 type an...Read More
posted May 21, 2023Handlebar replacement for SV650!
By Japanese Webike user (295215)From
For handlebar replacement, it is necessary to drill a hole to hold the switch in place.The SV is even more compact than the OEM because it is 1~2 cm shorter on the One Side.The aperture angle is large...Read More
posted Sep 18, 2022Quality is fine
By Japanese Webike user (295215)From
I use it on my GIXXER250. 20mm up on the riser to adjust the height, and the Riding Position is much easier. Drilling is necessary but not difficult.Read More
posted Apr 15, 2020I think I failed to use it on the W800
By Japan User(translated) (295215)From
I've been using the EZ-FIT-Bar, but I just need a little more height! And greedyI purchased this productThe quality is good with no plating irregularities and no surface scratches400ccClass for Replac...Read More
posted Nov 9, 2018HURRICANE BM Continental 3 Type Φ7/8-inc...
By NO NAME (5)From
Been using this handlebar for a few months and it is much better than my previous wide handlebar. The sweep back angle and height brings the handlebar closer to my body and easier for maneuvering. The...Read More
posted Nov 12, 2017This is the limit.
By Japan User(translated) (295215)From
Since it was 163 cm and Small handle, I felt Handlebar was a bit far and low, so I exchanged it. Harness and Wire had plenty of time, but since Brake hose was feeling Limit even at NORMAL, I searched ...Read More
posted Apr 17, 2017Shape Material is both good feeling. I w...
By Japan User(translated) (295215)From
ZEPHYR750 (2001 type) I bought it because the OEMHandlebar was a little crooked.The Handlebar I bought this time is a nice feeling, but there may be shapes to fit more.Since this Manufacturer is rich ...Read More