[How is it used?The feel is the same as OEM.Was the one you received as per Image?Street ImageHow was your experience with it?usually[Points to note]Up Handle and not sure of the length when it's in H...Read More- Like all of you who are replacing Handlebar on W650etc,The work on the carburetor side was more Large strange.I can't help but say that we do it without removing the carburetor.But they got into it su...Read More
- Installed on a MONKEY125.I purchased the 100mm Long and was able to attach it successfully, so I have no complaints.However, there was quite a bit of Wire left over, so I thought it would be good to h...Read More
- The Adjuster on the Pull Side didn't last a year and snapped off.I'll try another Manufacturer.Read More
- I used to use the OEM cable with the cb1300SUPER BOLDOR handlebar up 5cm, but it was not long enough and I had a strong feeling that it was sticking out, but when I changed to the long cable, the hand...Read More
- I used to use 10cm Long on my HURRICANE Pipe Handlebar Kit, but it was too long, so I decided to use 5cm.Clearance is just fine.Read More
- Long cable was replaced when the handlebar was replaced.Handlebar is HURRICANE's POLICE2 type with 27mm up set up holder compared to NORMAL.OEMCable was not enough, so we decided to use a 10 cm long c...Read More
- I installed a ZETA handlebar on my MC43, and it was about 30mm higher, but the OEM tension was too tight, so I replaced it with a ZETA handlebar. 1 pc of pull was applied to the handlebar, and the dir...Read More
- Changed to Long cable due to change to Handlebar Up Type. It is a little long, but there is no problem in use. Conversely, the Handlebar can still be raised.Installation was troublesome with the carbu...Read More
- I bought Hurricane long throttle cable to replace the old on my Honda VFR800 VTEC 2003. Shipping time is a bit longer than 2 weeks after shipping. Hurricane throttle cable is Made in Japan, the cable ...Read More
- Bought these for dragstar 1100 classic. The cables look to be of good quality and fit my bike perfectly. Don't forget to lube the cables before installing them on the bike.Read More
- I received the product immediately after purchase and am very satisfied with it.I'm sorryRead More
- [How is it used?Street Riding and TouringI purchased this product because the OEMWire is no longer available due to the replacement of the Handlebar.Used for FCR Carburetor Body.Was the one you receiv...Read More
- Used to convert HURRICANE to bar handle with Kawasaki holder kit.5 cm is better.Read More
- 아직 장착 전이지만 모두가 하는 그 허리케인 z2 맞습니다.순정으로 타려했으니 체형상 장거리주행하면 팔목부분에 힘이 많이 가서 힘들더라구요 . Z2 핸들은 좀더 편하게 운행이가능하다해서 주문했습니다 포장도 꼼꼼하게 잘 왔습니다 아주 좋아요 . 위제품은 기존 부속은 길이가 안나와서 교체를 위해 구매
------------------------------...Read More - When I cleaned the throttle body of my 2008 CB400SB, I decided to replace the Accelerator Wire as a precaution since the mileage reached 50,000 km. The reason why I bought the 50 millimeter long wire ...Read More
?
THE LARGEST
SHOP IN JAPAN
EXCLUSIVE COUPONS,
SALE, DEALS
FAST, RELIABLE
SHIPPING