- I bought this brake master cylinder to be installed on my 2006 Honda CB400SF Hyper VTEC Spec 3. I replaced the old original stock master cylinder with the Semi Radial Brake Master Cylinder kit was per...Read More
Used for GSX-S750It's Universal, but I have everything I need to put it on my GSX.I just bought a new Banjo bolt and the rest is Included Parts:andIt's all done with the relocation.OEMs are too effect...Read More- I replaced the horizontally mounted Master Cylinder.I replaced it because I wanted a more Linear feel and it was the right choice.I'm changing from a 5/8 to a φ19, so even though the Lever ratio has c...Read More
- The radial master of the brembo that came with the car when I got it interfered with the meter, so I opted for the semi-radius as a countermeasure.The feed back at breaking doesn't have the same direc...Read More
- Since the stock of OEM parts was running low, I bought this one because it had been used for 24 years since new. Unfortunately, the pitch of the MASTER installation part of the brake hose was differen...Read More
- It is semi-radial, so you can put a limit on the old 250Sports as wellthe tzr also came with a Mirror Adapter, which is not necessary for the tzrTouch becomes a little direct and there is a feeling of...Read More
- I overhauled the OEMMASTER, but the ineffectiveness did not improve, so I replaced it with a It was At first, I thought about Radial, but I chose it because I heard that it needed to be processed I'm ...Read More
- Changes from OEMMASTER. The width of Control has expanded considerably. For example, when stopping with a signal or the like, it became a cuckoo just before it got completely stationary changed to be ...Read More
- I thought about making OEMMaster cylinder OH, but I bought it because it was cheap. The reason for using Semi-radial master is Radial, zrx 1100's Accelerator Wire comes down, so it interferes, so ...Read More
- Actually, I wanted to attach Radial master, but ZX - 6R (2001 year) I was able to put on, ZX - 9R (1999 formula) I gave up thinking that we needed substantial processing, but I was feeling frustrated ...Read More
- Brake fluid tank of OEM was Large and disturbing when I was wearing Hand cover. BrakeTouch Improvement is not the purpose. There is interference with Cowl, I purchased Semi-radial. The Handlebar can a...Read More
- I think that reliability is high because it is adopted also in OEM. I bought to convert YZ 250 F to MOTARD.Since it is installed with high probability with Hand guard as MOTARD or Off car, if it is Ra...Read More
- After purchasing ZXR with a used car, I was dissatisfied with Brake Fee Ring, so I first replaced the Brake fluid. However, although there was some improvement, I was still unsatisfied. Therefore, O o...Read More
- Along with Caliper exchange, since Piston size has been upgraded, the horizontal alignment MASTERCylinder corresponding to it is 5 / It became 8 Size. We also examined Radial 19 Ф Size, but we needed ...Read More
- Front brake around everything is NORMAL, the year is also 93 years old and it is to refresh a set to refresh. Even without Radial, Semi-radial got a good Touch feeling. (Mesh hose, Caliper, Rotor are ...Read More
- Mounting on ZZr 1100D. As you can see from the other review, Switch terminal needed a slight extension, but there was not any difficulty in mounting, we could do without changing switch box etc. My Ba...Read More
?
THE LARGEST
SHOP IN JAPAN
EXCLUSIVE COUPONS,
SALE, DEALS
FAST, RELIABLE
SHIPPING