- This cam came well packaged and shipped quickly. It makes noticeable power gains over my old bbr cam, installed on a 2004 crf100f with 120 bbr kit.Read More
- I added this camshaft to my modified 2000 XR100. Big gain!!! Noticible power increse!! Also it revs higher!! The cam fit perfect. Fits stock cam journal, and it fit my aftermarket journal.
Engine mo...Read More 
What made you decide to buy? I've done a lot of engine customization on the Ninja250sl, including a 4 cylinder engine is because I decided to install the standard High CamshaftHow was your experience ...Read More- I had these Yoshimura cams installed in my GSX 1400 '06 4 years back and it's now time to control and readjust shims. Installation needs a little adjustment on the cam holders due to the extra lift, b...Read More
- The last impression was a controversial evaluationThis time, I tried increasing the fuel with the power commanderSurprisingly the acceleration in the second half was sharp and I felt dangerousAfter al...Read More
- Embedding was not as difficult as I thought.I think it would be better to have Camshaft Sprocket and CamSprocketBolt ready. (Also, Vise pliers of Large eyes)It is a slow Torque that you care about, bu...Read More
- For Injection vehicles. I can also install it on KLX ... and purchased, installed it.- Difficulty of installationRequired tools (Thickness Gauge, Torque wrench, Micro meteretc. It is not difficult if ...Read More
- I used XR80Cam for many years in the vertical engine, but since I wanted to use YOSHIMURACam, I bought it.Yoshimura logo is marked on the surface Tufftride processing and the Tension rises. Although I...Read More
- Purchased by another company and attached to the GSX 1400. It is a combination of YOSHIMURAFull Exhaust System and Wotani PowerCoil and Icon Three adjustment. At Dyno Machine, the AR ratio is around 1...Read More
- Yoshimura cams - one of the best performance boosts for the GSX1400. Cams were posted quickly, cams were very well packaged. I would recommend Webike to my friends.Read More
- Takekawa SStage 115cc Bore Up Kit comes with Camshaft replacement. First I was surprised that Torque in the low and middle speed region was able to feel it. I feel that it seems that the high revoluti...Read More
- Torque was satisfied with Morimori at medium and low speeds, but I felt it was a way of doing Daradara and Mosari in a high speed area, so I thought it was expensive Parts but replaced with YOSHIMURA ...Read More
- ST-1 Camshaft exchange was carried out.
Although full admission has not been used yet, it is thought that the Torque of an inside low speed is going up.
It -run-came to be easy.
It is satisfied alt...Read More - although a kitaco twin tapered end muffler, a CRF duct, and an insulator outside carried out, it came out and it attached -- rotational frequency up -- rather than -- torque up all over the districts ...Read More
- although the cam of the manufacturer who is different until now was used -- it is exchange to ST-1 -- although I am 80 cc, after I put this in, the maximum high speeds are 98 K of 10-K up. There is ra...Read More
- SUBARASHII which put ST-1 into BANDIT1200S and which was simply made with it being unexpected -- until [ from a low speed / high-speed ] torque treats [ that it is easy to ride with what, and ] thickl...Read More
?
THE LARGEST
SHOP IN JAPAN
EXCLUSIVE COUPONS,
SALE, DEALS
FAST, RELIABLE
SHIPPING