(0)
(0)
(0)124 Reviews View type:
- Fits:
- HONDA
Installation takes only 15 minutes only. Easy and no special tools required. A small product made for great easy shifting better. Smoother shifting og gears and even made shifting from gear one to neu...Read More - Fits:
- HONDA
Great traction of the dry Clutch plates. Better boost of clutch and power delivered. Installation takes about 30minutesRead More - Easy installation than took only 10minutes. Removal of the side top fairings are required. No spark plug cap included so either you reuse the original cap or use other types of cap and as for me, I us...Read More
- Easy simple and effective. Reused the rubber washer from the original cap cover. Screw in and that's it. Temperature shows precisely of the heat from the engine. Great product for bikes with no temp g...Read More
- One of the best belting performance by Josho which combination with Josho variator set. Giving more durablities. Performance and quieter engine from the crankcase. Read More
- One of the best brands ever. Calculation on the spring force as 1 kitaco spring estimated of 10% on the clutch plates as 6 springs of 60% more force. Replacing 3 Kitaco clutch springs equals to 30% mo...Read More
- Fits:
- HONDA glom (MSX125) JC61-1300001-
- HONDA glom (MSX125) JC61-1000001-1299999
I-Map, great FI controller system I have ever installed. Easier to have the harness connectors. After installing the I-Map FI controller, you will instantly feels the pull and power on the bike. Maxim...Read More - Fits:
- HONDA
Installation its simple but no instructions on how to connect it! Gotta get the instruction thru search on Dilts-Japan but manual instructions are all in Japanese n pdf. Had to see e pictures which ju...Read More - Fits:
- HONDA Grom (MSX125) 13-21 EBJ-JC61
Quality very good finishing. Light weight and clean chrome finished. Installation very easy and fast. Tube connection to e muffler required tightening with different clamp as the original ones are sma...Read More - Fits:
- Others Universal
- HONDA MONKEY 09-12 (AB27-1900001-)(FI Vehicle)*Requires Top Bridge H30 Holder
- or MONKEY Handle Holder|*Requires switch hole drilling
- HONDA APE 50 08-12 (FI Drum brake) *Processing of switch hole is required|*Clutch cable must be changed.
- HONDA APE 50 -07|08 (Carburetor models) *Only for APE100(09-)
- ...and more.
Bar are well finished chrome. Easy installation. Posture changes to more sporty and cafe racer like riding posture. Switch indicator needed to drill hole as handlebar do not have any ready holes.Read More - Great accessory on much more solid front spocket cover. Installation very easy and took only 15minutes to install by Removing e original cover and replace the cover which reuses the original screws ba...Read More
- Installation requires certain parts to be cut off or drilled. The inner low side fairings are required to be cut off or you may drill off the end to slot in the side frame bars at your own preferrance...Read More
- Fits:
- HONDA MONKEY125 (JB02-1000001-)
- HONDA glom MSX125 (MLHJC618_D5000001-)
- HONDA glom (JC61-1000001-)
- HONDA GROM (JC61-1000001 or later/JC61-1300001 or later)
- HONDA GROM (JC75-1000001 and later)
- ...and more.
Great for warm seasons and fabulous smoother performance to the engine. Gives you a better smoother feelings while riding and you can feel your engine boost much faster response as the engine oil are ...Read More - Fits:
- HONDA glom EBJ-JC61 MSX125
Installation are very easy, connection just remove the original fender and unplug e signal lights also the down light needs to cut. Attachment either cut and twist or connect to a plug. Clean look and...Read More - When installation, need to remove the side fairings and than remove the bottom side fairings away. Than the bottom side fairings needed to be cut off as it obstructed the side frames. Or you can cut a...Read More
- Fits perfectly and very easy to install. Simple garnish but solid flawless the engine. Product very durable and colour perfection. Takes only a few minutes to install.Read More
- Fits:
- SUZUKI GRASS TRACKER 09-12 09-12(FI cars)*Side caps can be used with the stock ones.
- SUZUKI GRASS TRACKER -08 (Carburetor)*Drilling of switch holes is required. |*It is necessary to change the throttle cable
- clutch cable and brake hose. |*It is necessary to change the direction of the brake banjo.
- SUZUKI GSX400 05-07 GK7CA *Processing of the switch hole is required|* You can use the normal side cap.
- SUZUKI ST250 E Type -07 NJ4AA *Processing of switch holes required|* Normal side caps can be used.
- ...and more.
Prefect lowered handle bar and the colour are nice finishing. Needed risers as too low and the switches hits the sides fairings n tank. Switches needed to drill as it do not comes together with holesRead More - Nice quality finish. Installation are very easy to installed. The screws and nuts comes together. Screwing the nuts make sure you know how and if not, than ask your mechanics assistance. Wrongly fixtu...Read More
- Simple and easy to installed, just unscrews afew of the case nuts and crews back it again. Nice and beautiful plus eye catchers. Qualities are very details with perfectionist touch. Read More
- Nice smooth performance. Smpoth immediate responces on acceleration. Top end only smooth easily reached but no increase of top end. Only smoothness and quick reaponces no top end achievement nor addit...Read More
?
THE LARGEST
SHOP IN JAPAN
EXCLUSIVE COUPONS,
SALE, DEALS
FAST, RELIABLE
SHIPPING