5.7 USD
(863 JPY)
5.45 USD
(825 JPY)
(4% OFF)
3 (2 Reviews)
rating breakdown
5 Stars |
|
0 |
4 Stars |
|
0 |
3 Stars |
|
2 |
2 Stars |
|
0 |
1 Stars |
|
0 |
Average
It is used for the bolt hole parts of the handle post of a zoomer (ruckus).
Parts for hiding the hole of a socket bolt as the name suggests.
Those of black and plating with two kind and a price are also cheap.
The thing itself has a plastic coaIt is used for the bolt hole parts of the handle post of a zoomer (ruckus).
Parts for hiding the hole of a socket bolt as the name suggests.
Those of black and plating with two kind and a price are also cheap.
The thing itself has a plastic coated, and if it uses a slotted screwdriver etc. when removing, but power is put in poor, it is simply missing.
It may be better to see to a throwing-away grade.
more than it -- this much -- also coming out -- the impression from which the circumference of a handle became a sharp.
Since there is nothing also at the place removed so repeatedly, I think kana with the value more than a price.
In the direction called ! to hide a hole anyhow, it is recommended ^^
Reviews For HURRICANE Socket Bolt Cap From Other Webike User
Average
Since its former own car does not have a Cap in the HEXAGON Bolt which is fixing the Handlebar, either and was pleasing in Rust prevention of appearance and a Bolt hole using the black Cap, it was used also for GT1000 replaced (Plating type).On the DesigSince its former own car does not have a Cap in the HEXAGON Bolt which is fixing the Handlebar, either and was pleasing in Rust prevention of appearance and a Bolt hole using the black Cap, it was used also for GT1000 replaced (Plating type).On the Design of the circumference of a Handle, although the Plating type was used, if it cannot press down carefully at the time of attachment, a Plating will separate.
Since the number was mostly contained well, when several pieces went wrong, it was OK, but I considered that it was better to be businesslike with throwing away.View Detail
Most Viewed Reviews Of HURRICANE Cap Bolt Cover
Excellent
HURRICANE Hole PlugAbout quality and texture - Top quality. Textured surface finish on the black plastic plug and is of a strong construction allowing removal and reinstallation if required.About the feeling of use - After I removed the belt drive guards from my Buell, the exposed mounting holes looked terrible. These hole plugs from Hurricane were a perfect solution to that problem.Products to buy together - If you are also using bar end mirrors, Hurricane offer these hole plugs in various sizes to suit the OEM mirror mount points to give your bar end mirror installation that professional finish.Difficulty of installation - Very easy to install these hole plug. Just be sure the hole is clear of any debris prior and press the plug firmly all the way in.Cost performance and comparison with other products - They are a very basic part and the price from Hurricane matches that perfectly. There are other CNC machined hole plugs available from other brands at a higher cost but for me the plastic hole plug was the best option.About shipping and packaging - Sea freight is my preferred shipping option and usually arrives in Australia in 6 to 8 weeks from dispatch. Always well packaged to ensure parts arrive safety and are ready for use.Any concerns, cautions, or advice when purchasing - If Hurricane does not have the correct size for your intended hole just go 1 size smaller and add some silastic sealant to secure it in place.View Detail
Very Good
For M8 is a little different?First of all, please note that this is not a product for attaching to the hex holes of the Cap bolt. Do not blame the Manufacturer if you misunderstand the usage of this product.
I thought about what to do with the Screw holes that I had left partially visible and neglected, and remembered that there was also For M6 in the product I had bought to plug the M8 holes.
If you pick it up and compare the two, you will see that the texture of the head is different for some reason (minor change?), but the basic structure is the same. However, when you try to use them, the feel is slightly different.
The M8 for M8 is small and fits into the hole very well, whereas the M8 for M8 is not so responsive. The M8 for M8 has a head that fits tightly against the Exactly and fills the hole without gaps, making it difficult to remove, while the M8 for M8 has a slight rattle and can be removed by inserting a nail and pulling hard. I wonder if it is due to the difference in Screw Pitch.View Detail
Very Good
Tiny but unobtrusive.The M10 Screw mounting hole for the Stand Hook on the Swing Arm of the ZrX1200 DAEG is not used in the future, so I installed this Hole Plug. Is it really for M10Screw because it is unexpectedly small? I thought it would work, but it fit perfectly (laughs).
Pushing and rocking so you won't get blown away. Black resin, unobtrusive and Good.View Detail
Other Reviews From Japan User(translated)
Excellent
Radipon handled in Mild?attachment
The CBR650R is mounted at the same position angle as the NORMAL.
However, when the handlebar was cut to the Left lock, it interfered with the interior cover next to the Meter, so the interior cover was cut away.
I also purchased a 45° angled banjo adapter for the mesh hose to accommodate the tension of the mesh hose.
・NORMAL (Reserve integrated horizontal master) Impressions of
No complaints on public roads. Familiar feel and very easy to handle.
However, when the brake is set to "hard brake," the rate of increase in braking force relative to the input seems to decrease, and the brake becomes more forceful.
Radipon (Reserve separate body portrait master) Impressions of
It was totally different from what I expected, my expectation was that it would feel like a Rear brake…
It is really a mild and easy-to-handle radipon.
On public roads, it feels like NORMAL! I wonder if it's because NORMAL is the same NISSIN?
But I felt the radipon effect from Breaking a little stronger, and
It can be hung up to a hard brake without effort.
I felt trust that this could stop.View Detail
Very Good
packtalk bold Attached MountI purchased this for use with multiple Helmets. 。
Mount included with the BOLD.
Microphone and speaker are not included and must be purchased separately.View Detail
Excellent
Grip replacementGrip that had been used for a long time was worn out and had to be replaced.
They are soft and dampen vibration.View Detail
Very Good
Works well in everyday life[How is it used?
Used to lick Screw loose.
Was the one you received as per Image?
As per Image.
How was your experience with it?
When used on a strongly tightened Screw, it can be safely and securely removed.
The licked Screw was removed.
It is also useful for DIY Screw removal.
[Points to note]
When used on a licked Screw, it is best to beat it in with a Hammer before use.View Detail
THE LARGEST
SHOP IN JAPAN
EXCLUSIVE COUPONS,
SALE, DEALS
FAST, RELIABLE
SHIPPING