First, since the switch casing of an axel is fixed, you have to make a hole! I think that what is necessary is just to refer to the hole of a front handle.
At a good point, compared with a pure handle, a location also becomes
It was used for GS50.
First, since the switch casing of an axel is fixed, you have to make a hole! I think that what is necessary is just to refer to the hole of a front handle.
At a good point, compared with a pure handle, a location also becomes low, and it becomes touch like a separate handle.
A posture also becomes with some inclined attitudes and also increases speediness.
Overall appearance also becomes tight, is visible and satisfactory.
It becomes easy to carry out a cornering.
With a bad point, since he is tall at about 180, he becomes in the right-turn in a signal, and left turn that it is likely to interfere with a knee.
Since it is * personal opinion it may be better for a mirror to change since it becomes the touch opened to the outer one in case of a pure mirror ... Although the bad point was also mentioned, since the good point is larger, * is four pieces.
Fits: SUZUKI GSR400 -12 *Ask to drill switch holes|* Normal side caps can be used., KAWASAKI BALIUS2 *Requires drilling of switch hole|* Requires side cap (for 18mm diameter), KAWASAKI ZEPHYR750 RS *Requires drilling of switch hole|* Requires side cap (for 18mm diameter), KAWASAKI ZEPHYRX *Requires drilling of switch hole|* Requires side cap (for 18mm diameter), KAWASAKI ZEPHYR750 *Requires drilling of switch hole|* Requires side cap (for 18mm diameter)
[How is it used?
I changed XJR400R from OEM Handlebar to this Condor Handle.
Was the one you received as per Image?
The precision of the construction is good and the shape is cool.
Was the installation difficult?
It was the first time for me to replace the handlebar, so I had to remove and install the switch, fine-tune the angle of the handlebar, etc. The drilling of the holes for the switch box was done by a nearby motorcycle shop.
How was your experience with it?
With the OEM Handlebar, it seemed a little far away, but now that the Throttleetc. is in front of it, it is much easier to ride.
Curve also feels easier to turn.
[Included Parts:were they on?
None in particular
[Was there anything that disappointed you?
None in particular
Other items that would be helpful
Point or hang of installation:Anyway, it is to do fine-tuning repeatedly.
If you add a Switch box, you should fine-tune it, if you add an AxelSlot, you should fine-tune it, and repeat until you are satisfied.View Detail
Fits: SUZUKI GSR400 -12 *Ask to drill switch holes|* Normal side caps can be used., KAWASAKI BALIUS2 *Requires drilling of switch hole|* Requires side cap (for 18mm diameter), KAWASAKI ZEPHYR750 RS *Requires drilling of switch hole|* Requires side cap (for 18mm diameter), KAWASAKI ZEPHYRX *Requires drilling of switch hole|* Requires side cap (for 18mm diameter), KAWASAKI ZEPHYR750 *Requires drilling of switch hole|* Requires side cap (for 18mm diameter)
Separate Handlebars were out of stock, so I put the Condor Handle on backwards and tilted it forward. It is very forward leaning and narrow, so I think it will be strange to use Large until I get used to it.
If you are going to reverse mount it, CondorSW looks better without interference to Tank. The product itself is very good, so it depends on how you attach it.
I only reverse-mounted it, so just for reference, Accelerator Wire and OthersWire can be used as they are. However, I think it would be better to change the wires if possible, since they seem to be in pain. The same can be said for any handlebar replacement, but I think a drill is necessary because it is necessary to drill holes to fix switches.View Detail
Fits: SUZUKI GSR400 -12 *Ask to drill switch holes|* Normal side caps can be used., KAWASAKI BALIUS2 *Requires drilling of switch hole|* Requires side cap (for 18mm diameter), KAWASAKI ZEPHYR750 RS *Requires drilling of switch hole|* Requires side cap (for 18mm diameter), KAWASAKI ZEPHYRX *Requires drilling of switch hole|* Requires side cap (for 18mm diameter), KAWASAKI ZEPHYR750 *Requires drilling of switch hole|* Requires side cap (for 18mm diameter)
Fits: SUZUKI GSR400 -12 *Ask to drill switch holes|* Normal side caps can be used., KAWASAKI BALIUS2 *Requires drilling of switch hole|* Requires side cap (for 18mm diameter), KAWASAKI ZEPHYR750 RS *Requires drilling of switch hole|* Requires side cap (for 18mm diameter), KAWASAKI ZEPHYRX *Requires drilling of switch hole|* Requires side cap (for 18mm diameter), KAWASAKI ZEPHYR750 *Requires drilling of switch hole|* Requires side cap (for 18mm diameter)
Separate handle is stiff forward.
But, I want to Custom!
So, select CondorType.
Even with Normal handle comparison, the forward tilted posture does not change much, and there is no need for Rear Sets.
It is exactly right for age.
As the Handlebar End got down, the clearance with the Tank when the Handlebar was turned off became narrower, but none won.
It was a little troublesome to drill a hole in the Handlebar with Switch related installation.
Looks like it feels like a Custom feeling.View Detail
Fits: SUZUKI GSR400 -12 *Ask to drill switch holes|* Normal side caps can be used., KAWASAKI BALIUS2 *Requires drilling of switch hole|* Requires side cap (for 18mm diameter), KAWASAKI ZEPHYR750 RS *Requires drilling of switch hole|* Requires side cap (for 18mm diameter), KAWASAKI ZEPHYRX *Requires drilling of switch hole|* Requires side cap (for 18mm diameter), KAWASAKI ZEPHYR750 *Requires drilling of switch hole|* Requires side cap (for 18mm diameter)
We are riding the ZrX400 of the 2006 year formula.
Condor Handle interferes with Bikini cowl etc etc. I listen but I was able to install it without problems.
Clear the Handlebar Clearance with Tank Thumb 1. Adjust with a gap of about 5
HandlebarRight Side's OEMBrake fluidTank? Felt it was Limit.
Hose and Wire were still OEMs and there was no particular problem.
It is necessary to open the hole for fixing Electrical Switch Series by yourself.
Exchange time required time about 1 hour
Driving situation
Thinking from Bar handle, it makes me feel a bit cramped, but for someone I like it does not accumulate.
GSXetc. It feels like Separate handle.
Corner is also easy to bend (There are individual differences) I feel like it got it..
Mirror became easier to see also the arm became low!
View Detail
THE LARGEST
SHOP IN JAPAN
EXCLUSIVE COUPONS,
SALE, DEALS
FAST, RELIABLE
SHIPPING