7.5gx6 is used in order to take out setting of the maximum high-speed slippage with the super dio which carried out 7.5g bore up (^u^) Since setting of 7.0gx3+7.5gx3 was [ the slope of ascent, or ] the best setting that reaches and comes
weight roller
7.5gx6 is used in order to take out setting of the maximum high-speed slippage with the super dio which carried out 7.5g bore up (^u^) Since setting of 7.0gx3+7.5gx3 was [ the slope of ascent, or ] the best setting that reaches and comes out 80 km or more also on a flat road strongly.
Although it became empty, since strange wear was not parts with early sufficient durability, the weight roller set all to 7.5 g this time [ six ].
Since the super sprint weight roller of the daytona was used until now.
Although it became empty, the weight roller made from KN plan was used this time. -- The product made from KN thinks that reputation is a range to which it can be convinced if the thing good [ however ] which is a reasonable, and consumable goods are considered although it is a thing which is not so good in respect of durability.
* It is recommendation at those who exchange by themselves periodically.
* Since he was entering six piece actually although he entered three pieces, came out, thought that he was this price and purchased two sets, it arrived, and he was surprised to see (^_^;) I would like to measure with a digital meter on fixed * target.
Although the time and effort which will be exchanged if it thinks by long Sakka since he can buy three sets with one set made from a daytona if it is a product made from KN although the product made from a daytona is good in respect of a weight being known by a color is needed, it is profitable (^-^) It is a weight roller with custom reasonable recommendation also to a bundle and town riding groups (^^繧
Fits: YAMAHA , YAMAHA BWS (Bewith) (3AA), YAMAHA BWS (Bewith) (5DA), YAMAHA , YAMAHA
I used it for SUPER JOG63ccBore up
I am riding with Normal mufflerSpec. and the balance of the shifting is just right It is
Perhaps ChamberSpec. is too heavy and acceleration will be slow
This is for people who are tuned in to Emphasis on TorqueView Detail
Fits: YAMAHA , YAMAHA BWS (Bewith) (3AA), YAMAHA BWS (Bewith) (5DA), YAMAHA , YAMAHA
Although it was total and being reduced by 1g, I thought the kana ? which could be reduced by 1 moreg.
It is the height of COSPAR best although
It purchased with the pure Weight roller having carried out uneven wear for the acceleration-force Up.
Although it was total and being reduced by 1g, I thought the kana ? which could be reduced by 1 moreg.
It is the height of COSPAR best although various weight is tried.View Detail
Fits: YAMAHA , YAMAHA BWS (Bewith) (3AA), YAMAHA BWS (Bewith) (5DA), YAMAHA , YAMAHA
Attachment can also be made satisfactory at a low price, and it became, and after-attachment start, a gear, etc. ride on a smooth easily, and are satisfied with it of the price.
It purchased for maintenance of a [Webike-monitor] vino.
Attachment can also be made satisfactory at a low price, and it became, and after-attachment start, a gear, etc. ride on a smooth easily, and are satisfied with it of the price.View Detail
Fits: YAMAHA , YAMAHA BWS (Bewith) (3AA), YAMAHA BWS (Bewith) (5DA), YAMAHA , YAMAHA
It seems that it is set to about 10.5 g since the husks of pure WR are only 1g.
It seems that 1.5g became light since it weighed [ pure ] 12g, but it was slightly too light for on
It uses putting into pure WR of the lead 100 which extracted weight.
It seems that it is set to about 10.5 g since the husks of pure WR are only 1g.
It seems that 1.5g became light since it weighed [ pure ] 12g, but it was slightly too light for oneself.
Also in striped sushi and the maximum high speed, about 5 km/h of touch which rotational frequency went up considerably has fallen.
I would like to make it a little heavier shortly.
Since the price is cheap, it is good to be able to try on various weights.View Detail
Fits: YAMAHA , YAMAHA BWS (Bewith) (3AA), YAMAHA BWS (Bewith) (5DA), YAMAHA , YAMAHA
Although the front was using 9.5 g, since he had a feeling that rotational frequency became high too much just for a moment, it is purchased.
Furthermore, it had fallen in [ the max
It extracts and equips with the weight of pure WR of the lead 100.
Although the front was using 9.5 g, since he had a feeling that rotational frequency became high too much just for a moment, it is purchased.
Furthermore, it had fallen in [ the maximum high speed ] itself.
Then, 9 g was purchased and the place set to 12gx3+10.0g(husks are 1g) x3=66g became good pure.
Since it equipped with the boss washer instead of making WR heavy, a start is not getting worse, either and elongation became good above all.View Detail
THE LARGEST
SHOP IN JAPAN
EXCLUSIVE COUPONS,
SALE, DEALS
FAST, RELIABLE
SHIPPING