23.57 USD
(3,565 JPY)
22.54 USD
(3,410 JPY)
(4% OFF)
5 (2 Reviews)
Excellent
Since it was not attached to a used muffler, it purchased separately.
Since muffler attachment was carried out previously and the center stand was removed, the remarkable labor was required for wearing of a spring at the time of re-attachment.
TheySince it was not attached to a used muffler, it purchased separately.
Since muffler attachment was carried out previously and the center stand was removed, the remarkable labor was required for wearing of a spring at the time of re-attachment.
They are goods which can be attached easily in case of attachment in the state where the center stand is attached.
Since a pin stops merely entering by a stopper's thickness, I consider that it is better to prepare a thin nut.
In addition, the place which must take care is a rubber attached to a stopper body.
When reusing the thing attached to the pure muffler, degradation of the rubber itself may be progressed and torn to pieces.
Since it is 100 points since it remains unmoved even if thickness also comes out enough about goods and it has bounded the stand rough, but it is repair parts, it may be unavoidable, but they will be 120 points if there is an easy attachment description.
Reviews For r's gear Stand Stopper From Other Webike User
Very Good
Centre stand stop for GSX 1400The previous owner had fitted a 4-1 aftermarket exhaust which meant the centre stand touched the swingarm. This part is a simple solution which works but you do need to screw on your own rubber/pvc bung (I bought a door stop from a DIY shop).I was concerned about buying and shipping from Japan to UK but as long as you follow the procedure (email to see if in stock and lead time) and check carefully before pressing the buy button, then all will be ok. Took 2 weeks to arrive from Japan. Thanks guys.View Detail
Most Viewed Reviews Of r's gear Center Stand Stopper
Very Good
Centre stand stop for GSX 1400The previous owner had fitted a 4-1 aftermarket exhaust which meant the centre stand touched the swingarm. This part is a simple solution which works but you do need to screw on your own rubber/pvc bung (I bought a door stop from a DIY shop).I was concerned about buying and shipping from Japan to UK but as long as you follow the procedure (email to see if in stock and lead time) and check carefully before pressing the buy button, then all will be ok. Took 2 weeks to arrive from Japan. Thanks guys.View Detail
Other Reviews From Japan User(translated)
Excellent
Radipon handled in Mild?attachment
The CBR650R is mounted at the same position angle as the NORMAL.
However, when the handlebar was cut to the Left lock, it interfered with the interior cover next to the Meter, so the interior cover was cut away.
I also purchased a 45° angled banjo adapter for the mesh hose to accommodate the tension of the mesh hose.
・NORMAL (Reserve integrated horizontal master) Impressions of
No complaints on public roads. Familiar feel and very easy to handle.
However, when the brake is set to "hard brake," the rate of increase in braking force relative to the input seems to decrease, and the brake becomes more forceful.
Radipon (Reserve separate body portrait master) Impressions of
It was totally different from what I expected, my expectation was that it would feel like a Rear brake…
It is really a mild and easy-to-handle radipon.
On public roads, it feels like NORMAL! I wonder if it's because NORMAL is the same NISSIN?
But I felt the radipon effect from Breaking a little stronger, and
It can be hung up to a hard brake without effort.
I felt trust that this could stop.View Detail
Very Good
packtalk bold Attached MountI purchased this for use with multiple Helmets. 。
Mount included with the BOLD.
Microphone and speaker are not included and must be purchased separately.View Detail
Excellent
Grip replacementGrip that had been used for a long time was worn out and had to be replaced.
They are soft and dampen vibration.View Detail
Very Good
Works well in everyday life[How is it used?
Used to lick Screw loose.
Was the one you received as per Image?
As per Image.
How was your experience with it?
When used on a strongly tightened Screw, it can be safely and securely removed.
The licked Screw was removed.
It is also useful for DIY Screw removal.
[Points to note]
When used on a licked Screw, it is best to beat it in with a Hammer before use.View Detail
THE LARGEST
SHOP IN JAPAN
EXCLUSIVE COUPONS,
SALE, DEALS
FAST, RELIABLE
SHIPPING