0.9~ USD
(136 JPY)
5 (1 Reviews)
rating breakdown
5 Stars |
|
1 |
4 Stars |
|
0 |
3 Stars |
|
0 |
2 Stars |
|
0 |
1 Stars |
|
0 |
Excellent
Thinner than AVS wireSince there is no description of manufacturing Manufacturer on the electric wire, I do not know detailed product information, but since it is a standard item, I will refer to Sumitomo Electric's HP's point of caution.
- Allowable current is "19 A"
- Heat resistant temperature is "80 degrees"
* However, these two points are when the ambient temperature is 40 - Degrees, and when the ambient temperature becomes higher, the allowable current becomes lower.
* Allowable current is the current with conductor temperature of 80 degrees under ambient temperature 40 - Degrees.
Ambient temperature : Allowable current (A)
30 ℃ : 21
40 ° C : 19
50 ° C : 16
60 ° C : 13
70 ° C : 9
I think whether it is preferable to use with a current of about 70% or 80% of the Large body. (Largest Large 13 A ~ 16 A)
As for the thickness of the electric wire, (On Specifications) 0 of the AVS electric wire handled by Emon 0. 5sq~0. It will be equivalent to 75 sq.
Since the coating is thin, it should be installed where it will not be crushed or caught, or separately (It is from the same Brand) It is better to summarize Wiring with PVCTube.
Most Viewed Reviews Of Neofactory Wiring / Cords
Excellent
Battle at priceThis is the second time I've ordered this product, and I bought it again because it nicely hides the various power cords sticking out from the outside.
Anyway, if you put 1 pc in Garage, it will be useful for something.View Detail
Excellent
Wiring is cleanIt's used for the Wiring Cover of CYGNUS X, MONKEY's external power supply and outlet
The way to use it is to put it over the cord that was taken out of the power supply by an individual It's not so pretty with the direct exposure to the Handlebar and Meter area etc But by interrupting it in the Slit tube, it's neat and tidy
You can do beautifully even with Heat Shrink Tube, but if you have a coupler or something like that, you can use it I have to remove the tube from the Coupler and install it and then play the Coupler again It's very easy to store with this Slit tubeView Detail
Excellent
cheapAlthough I was slightly worried because it was cheap, texture etc.. I think that it is a very good product, unchanged from the Manufacturer object. I do not know whether durability will make a difference, but there is no problem to use normally.View Detail
Other Reviews From Japan User(translated)
Excellent
Radipon handled in Mild?attachment
The CBR650R is mounted at the same position angle as the NORMAL.
However, when the handlebar was cut to the Left lock, it interfered with the interior cover next to the Meter, so the interior cover was cut away.
I also purchased a 45° angled banjo adapter for the mesh hose to accommodate the tension of the mesh hose.
・NORMAL (Reserve integrated horizontal master) Impressions of
No complaints on public roads. Familiar feel and very easy to handle.
However, when the brake is set to "hard brake," the rate of increase in braking force relative to the input seems to decrease, and the brake becomes more forceful.
Radipon (Reserve separate body portrait master) Impressions of
It was totally different from what I expected, my expectation was that it would feel like a Rear brake…
It is really a mild and easy-to-handle radipon.
On public roads, it feels like NORMAL! I wonder if it's because NORMAL is the same NISSIN?
But I felt the radipon effect from Breaking a little stronger, and
It can be hung up to a hard brake without effort.
I felt trust that this could stop.View Detail
Very Good
packtalk bold Attached MountI purchased this for use with multiple Helmets. 。
Mount included with the BOLD.
Microphone and speaker are not included and must be purchased separately.View Detail
Excellent
Grip replacementGrip that had been used for a long time was worn out and had to be replaced.
They are soft and dampen vibration.View Detail
Very Good
Works well in everyday life[How is it used?
Used to lick Screw loose.
Was the one you received as per Image?
As per Image.
How was your experience with it?
When used on a strongly tightened Screw, it can be safely and securely removed.
The licked Screw was removed.
It is also useful for DIY Screw removal.
[Points to note]
When used on a licked Screw, it is best to beat it in with a Hammer before use.View Detail
THE LARGEST
SHOP IN JAPAN
EXCLUSIVE COUPONS,
SALE, DEALS
FAST, RELIABLE
SHIPPING