* The BEST and MUST store to find Japanese parts. * Register now for amazing deals and other special offers! *Over 800,000 listed items. It's hard NOT to find your parts.
SIGN IN TO WEBIKE JAPAN
Please enter email at least 6 characters.
Please enter a valid email address.
Email is already in use.
Your account has been banned.
Email address and/or password is not match.
Authentication with facebook fail.Please try again.
Please select How did you get to know about Webike Japan?
OR
YOUR ACCOUNT HAS BEEN CREATED!
Congratulations! Your new account has been successfully created! You can now take advantage of member privileges to enhance your online
shopping experience with us. If you have ANY questions about the
operation of this online shop, please email Webike through CONTACT US.
A confirmation has been sent to the provided email address. If you
have not received it within the hour, please contact us.
Looks like you access from European region.
Would you shop at webike.eu.com?
I installed it with more emphasis on performance. The price was honestly high, but it was correct and installed. The place of darkness became bright and the appearance improved as well. Large I am satisfied with the change.
Now if there is a difference in width size of the radiators I had to re-drill the holes on the side brackets by about 5mm each side then the cover slotted over nice and tight so expect there could be some adjustment needed View Detail
[How is it used? Looks good but peLePera-like. Was the one you received as per Image? Yes, I have. I just want it to feel a little more rigid or solid. Was the installation difficult? Easy How was your experience with it? PeLePera-like [Included Parts:were they on?
[Was there anything that disappointed you?
Other items that would be helpful Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the ManufacturerView Detail
Whether the width is somewhat wide or not, if you tighten the Mounting Bolt to the Radiator core, the network becomes quite distorted. I put in Washer and adjusted the installation of the net and Bracket to the extent possible, but it was useless. After all, Bracket was machined and installed. It looks nice, but the part of the net is too bad LePera.View Detail
Minty Kids Parts can be exchanged The price is serious Exchange, correct answer This Recommendation I changed a part to Rivet stop It also looks different. Rivet Change RecommendationView Detail
To the price, it is ba LePera. I installed it on CB1300SF04, but the width is wide and if I tighten Bolt as it is it will deform the net. I put Washer in both and tightened. It looks cool, it's Cool.View Detail
Now if there is a difference in width size of the radiators I had to re-drill the holes on the side brackets by about 5mm each side then the cover slotted over nice and tight so expect there could be some adjustment needed View Detail
[How is it used? I had been using an inconspicuous Oil cooler guard made by another company, but bought it for dress-up purposes and upgraded it.
Was the one you received as per Image? The thickness was thin and there were some concerns about its strength.
Was the installation difficult? The lower part is fixed to the Rubber Bush (Grommet) of the OEM Oil cooler, but it requires a hang. Be careful not to try to force it into place, as it may damage the bush.
How was your experience with it? The Size feel is pleasantly Exactly. The oil cooler guard I used before had a large gap between the core and the guard, and the netting was rough, so when I was touring, a beetle I had never seen before got caught and killed me from the heat.
[Included Parts:were they on? Except for Body, only Cushion is available.
[Was there anything that disappointed you? The thickness was thinner than I expected, so I might hurt myself if I carelessly touch it.
For hang installation, it is better to remove the oil cooler from the frame with the hose connected, and then remove the rubber bushing together with the oil cooler.View Detail
[How is it used? Looks good but peLePera-like. Was the one you received as per Image? Yes, I have. I just want it to feel a little more rigid or solid. Was the installation difficult? Easy How was your experience with it? PeLePera-like [Included Parts:were they on?
[Was there anything that disappointed you?
Other items that would be helpful Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the ManufacturerView Detail
I bought this to prevent RadiatorCore from collapsing. The Motorcycle I used to ride didn't have such a Guard, and that's why the fins would get crushed by stepping stones, etc. and not cool → going to the verge of Overheat! I bought it as a Risk hedge because I was in a bit of pain.
The price is a little more effective than other manufacturers, but the product itself is thin and flexible. Therefore, it fits to RadiatorCore which is slightly curved, and the adhesion is good impression. Also, because it is a dedicated product, the position and dimensions of the holes for installation are just right.
I have used it for about 2 years and it works well. There is almost no Core crush and Protection performance seems to be good.
If I mention a point to be careful, it is attention to the injury at the time of the installation. As you can see in the description, the thinness of the product makes it easy to cut the edge, so it is better to avoid working with bare hands. It is better to wear military or mechanical gloves for protection before working.View Detail
I was surprised at the lightness of the Off-Road Helmet as soon as I held it, it is so light that I could not believe it is an Off-Road Helmet. The design is cool and comfortable to wear. I highly recommend this product because of its good cost performance.View Detail
It takes only a few minutes to warm up after turning on the power. Thanks to the electric heating system in the fingertips as well, there is no coldness at the fingertips and they are comfortable. The size is different from the usual size and feels large, so we recommend that you try it on before purchasing.View Detail
It was introduced as an intake system Custom after the exhaust system was replaced. I feel that the replacement together with Funnel and IntakeDuct has increased the intake volume and slightly increased the power extension from high RPM. However, it is difficult to feel such a drastic change at TouringLevel, so I would not recommend it to Touring Mainers considering the cost performance.View Detail
Replaced at the same time as PowerIntakeDuct. It is simple, but it has a manufacturer's logo and is visually appealing and has a dress-up effect. Since the OEM cannot be diverted as is, I feel that it should have been included with the Duct anyway.View Detail
The intake system was installed as a custom system for the purpose of power up along with the replacement of the exhaust system. The intake port is larger than the OEM intake port, and I think the intake volume is increased, but to be honest, I couldn't really feel the effect at TouringLevel.View Detail
?
THE LARGEST
SHOP IN JAPAN
EXCLUSIVE COUPONS,
SALE, DEALS
FAST, RELIABLE
SHIPPING