5.7 USD
(863 JPY)
5.45 USD
(825 JPY)
(4% OFF)
5 (14 Reviews)
Very Good
When I divide, I want to change it at once.Although it may be a replacement after Oil leaked out, it is better to replace it at the same time as maintenance that cracks Case anyway. The old Seal has a hard Rip even if it does not leak. It is not expensive, and a soft Rip feels nice.
It is the same for OEM, but Counter Shaft 's Seal requires too much attention because it touches Bearing and becomes Friction loss.
Reviews For SP TAKEGAWA Oil Seal Set From Other Webike User
Excellent
You can't go wrongI change it when I mess with the Engine When you see the CUBs which is often seen in the city with the base of Kick Arm is oil and gritty, you can change it I want to give it to youView Detail
Excellent
WarmthPurchased along with the EngineOH
I compared the OEM and other manufacturers and decided on this one because it was cheaper and because of the fact that it's Takekawa
In addition, the Oil Seal of the KICKStarter Department is not available in the OEM Product with Trip
And it's a good one
But, Mr. Takekawa, it doesn't have a Sticker in it I wanted itView Detail
Excellent
CUB series Engine!Oil started bleeding from the root of SUPER CUB 90's Kick Arm, so I bought it.
Thinking that it was a good opportunity, Set Oil seal asked for all replacement, and combined labor cost was 4000 yen!
Although it is the manufacture of China KYK, Kick Arm part is strengthened countermeasures against leakage and the point that it is inexpensive is the deciding factor of purchase!
Even if it is combined with the labor charge, it is not a price that was Large, so I will order the next.View Detail
Very Good
I'm curious about the difference between 13.7 and 13.8.It is safe to assume that the basic structure of oil seals is the same except for the manufacturing manufacturer (and quality), so it is better to use other companies' quantity:Choose it because it's generally cheaper than Set.
The only thing I'm curious about is the size for the Kick starter spindle.
91202-302-010 is 13.7×24×5
91202-KFL-841 is 13.8×24×5
The Other Brand Product has a common part number and Dr. google searches for 13.7 and 13.8 in either size and comes up with 91202-302-010.
The diameter of the Kick Shaft I have is 13.8mm±0.02, so
Even though it rotates, it's less frequent and a little tighter is less likely to leak. Or so I think. (I think Da Strip is an extra for CellEngine that doesn't use KICK)
The conclusion, though, can be accepted as the same thing.
If you care about it, choose the OEM or the POSH with the same Seal set of Size as the OEM. and
By the way, the oil seal that leaks oil easily in our house is
?Shift arm
?Generator
?Counter Shaft
So I don't care so much about KICK.View Detail
Excellent
Mukawa Oil sealI used it for the car MONKEYOverhaul じ.
The price is reasonable and it is without money.
However, one difficulty is Made in China.
Well, there may be no choice in this amount of money.View Detail
Most Viewed Reviews Of SP TAKEGAWA Oil Seal
Excellent
You can't go wrongI change it when I mess with the Engine When you see the CUBs which is often seen in the city with the base of Kick Arm is oil and gritty, you can change it I want to give it to youView Detail
Excellent
WarmthPurchased along with the EngineOH
I compared the OEM and other manufacturers and decided on this one because it was cheaper and because of the fact that it's Takekawa
In addition, the Oil Seal of the KICKStarter Department is not available in the OEM Product with Trip
And it's a good one
But, Mr. Takekawa, it doesn't have a Sticker in it I wanted itView Detail
Excellent
I appreciate the consumablesI asked for OEM parts, but they said it would be a two month wait ~
I searched the site for a compatible product and found it!
That's why I bought this product
It was removed from the body of the car, and the measurements were in perfect agreement with 12×21×4
Buy two of them including spares, just in case
It's originally from China, so Seal's accuracy is..
Speaking of the shift part, it is a part that moves frequently and requires a high degree of sealing, accuracy and durability Replace it and you'll be safe for the foreseeable futureView Detail
Excellent
CUB series Engine!Oil started bleeding from the root of SUPER CUB 90's Kick Arm, so I bought it.
Thinking that it was a good opportunity, Set Oil seal asked for all replacement, and combined labor cost was 4000 yen!
Although it is the manufacture of China KYK, Kick Arm part is strengthened countermeasures against leakage and the point that it is inexpensive is the deciding factor of purchase!
Even if it is combined with the labor charge, it is not a price that was Large, so I will order the next.View Detail
Other Reviews From Japan User(translated)
Excellent
Radipon handled in Mild?attachment
The CBR650R is mounted at the same position angle as the NORMAL.
However, when the handlebar was cut to the Left lock, it interfered with the interior cover next to the Meter, so the interior cover was cut away.
I also purchased a 45° angled banjo adapter for the mesh hose to accommodate the tension of the mesh hose.
・NORMAL (Reserve integrated horizontal master) Impressions of
No complaints on public roads. Familiar feel and very easy to handle.
However, when the brake is set to "hard brake," the rate of increase in braking force relative to the input seems to decrease, and the brake becomes more forceful.
Radipon (Reserve separate body portrait master) Impressions of
It was totally different from what I expected, my expectation was that it would feel like a Rear brake…
It is really a mild and easy-to-handle radipon.
On public roads, it feels like NORMAL! I wonder if it's because NORMAL is the same NISSIN?
But I felt the radipon effect from Breaking a little stronger, and
It can be hung up to a hard brake without effort.
I felt trust that this could stop.View Detail
Very Good
packtalk bold Attached MountI purchased this for use with multiple Helmets. 。
Mount included with the BOLD.
Microphone and speaker are not included and must be purchased separately.View Detail
Excellent
Grip replacementGrip that had been used for a long time was worn out and had to be replaced.
They are soft and dampen vibration.View Detail
Very Good
Works well in everyday life[How is it used?
Used to lick Screw loose.
Was the one you received as per Image?
As per Image.
How was your experience with it?
When used on a strongly tightened Screw, it can be safely and securely removed.
The licked Screw was removed.
It is also useful for DIY Screw removal.
[Points to note]
When used on a licked Screw, it is best to beat it in with a Hammer before use.View Detail
THE LARGEST
SHOP IN JAPAN
EXCLUSIVE COUPONS,
SALE, DEALS
FAST, RELIABLE
SHIPPING