45.61 USD
(6,899 JPY)
4 (9 Reviews)
Excellent
Cool!I bought it for mounting Tail light on Racer.
Because Universal's Tail light requires OEMFender to drill and so on, the Blinker hole is not empty, but it looks cool and cool.
Position, License Plate Light, Stop-lamp attached
Reviews For ACERBIS X-LED PLATE Tail Light From Other Webike User
Excellent
Suitable for TRIAL vehicles.Very lightweight and compact, ideal for TRIAL vehicles with narrower rear fenders.
The Rear Fender of the SCORPA SY250F had a mark for drilling holes in the mounting holes of this Tail Lamp and the Exactly position, so it was very easy to install.
To install the License Plate, it is necessary to drill holes and attach the Bracket or Base.View Detail
Terrible
That's too badThe first one I received did not light up the position lamp.
I was able to get a replacement, but the replacement had some Lamp problems within 2 weeks of installation.
I bought this one for the quality and avoided very cheap products from other Manufacturers, but it was not good because of water ingress into the Lamp.
It was a shame because the brightness was fine and I liked the shape.View Detail
Very Good
Good looks and high durability.The KLX150BF has been in use for two years.
Basically, drill holes directly on Racer's PolymerFender and install it with Bolt & Nut. Product. I have made and installed the Bracket by myself, but it requires some skill to install it on a TRAIL vehicle.
The License Plate is also attached to the resin Fender via Bracket, but It seems to be strong enough. I run through the woods every weekend, and there is no sign of breaking. It's strong. The weight is light and the stop lamp is very bright.View Detail
Average
Good productVery lightweight
Because the installation is universal, it seems to need some drilling on the Fender side
In my case, I made an inner fender, drilled holes in it and installed it
Blinker is also attached to Inner fenderView Detail
Very Good
ACERBIS X-LED PLATE Tail LightThe LED of TER light of ACERBIS used before was replaced with this because Left half was cut off. It is perfect for external Fender. However, because it is not a shape considering the installation of Blinker, I had a hard time installing Blinker. I like Design because it is ◎.
View Detail
Most Viewed Reviews Of ACERBIS Taillights
Excellent
Suitable for TRIAL vehicles.Very lightweight and compact, ideal for TRIAL vehicles with narrower rear fenders.
The Rear Fender of the SCORPA SY250F had a mark for drilling holes in the mounting holes of this Tail Lamp and the Exactly position, so it was very easy to install.
To install the License Plate, it is necessary to drill holes and attach the Bracket or Base.View Detail
Terrible
That's too badThe first one I received did not light up the position lamp.
I was able to get a replacement, but the replacement had some Lamp problems within 2 weeks of installation.
I bought this one for the quality and avoided very cheap products from other Manufacturers, but it was not good because of water ingress into the Lamp.
It was a shame because the brightness was fine and I liked the shape.View Detail
Very Good
Good looks and high durability.The KLX150BF has been in use for two years.
Basically, drill holes directly on Racer's PolymerFender and install it with Bolt & Nut. Product. I have made and installed the Bracket by myself, but it requires some skill to install it on a TRAIL vehicle.
The License Plate is also attached to the resin Fender via Bracket, but It seems to be strong enough. I run through the woods every weekend, and there is no sign of breaking. It's strong. The weight is light and the stop lamp is very bright.View Detail
Average
Good productVery lightweight
Because the installation is universal, it seems to need some drilling on the Fender side
In my case, I made an inner fender, drilled holes in it and installed it
Blinker is also attached to Inner fenderView Detail
Very Good
ACERBIS X-LED PLATE Tail LightThe LED of TER light of ACERBIS used before was replaced with this because Left half was cut off. It is perfect for external Fender. However, because it is not a shape considering the installation of Blinker, I had a hard time installing Blinker. I like Design because it is ◎.
View Detail
Other Reviews From Japan User(translated)
Excellent
Radipon handled in Mild?attachment
The CBR650R is mounted at the same position angle as the NORMAL.
However, when the handlebar was cut to the Left lock, it interfered with the interior cover next to the Meter, so the interior cover was cut away.
I also purchased a 45° angled banjo adapter for the mesh hose to accommodate the tension of the mesh hose.
・NORMAL (Reserve integrated horizontal master) Impressions of
No complaints on public roads. Familiar feel and very easy to handle.
However, when the brake is set to "hard brake," the rate of increase in braking force relative to the input seems to decrease, and the brake becomes more forceful.
Radipon (Reserve separate body portrait master) Impressions of
It was totally different from what I expected, my expectation was that it would feel like a Rear brake…
It is really a mild and easy-to-handle radipon.
On public roads, it feels like NORMAL! I wonder if it's because NORMAL is the same NISSIN?
But I felt the radipon effect from Breaking a little stronger, and
It can be hung up to a hard brake without effort.
I felt trust that this could stop.View Detail
Very Good
packtalk bold Attached MountI purchased this for use with multiple Helmets. 。
Mount included with the BOLD.
Microphone and speaker are not included and must be purchased separately.View Detail
Excellent
Grip replacementGrip that had been used for a long time was worn out and had to be replaced.
They are soft and dampen vibration.View Detail
Very Good
Works well in everyday life[How is it used?
Used to lick Screw loose.
Was the one you received as per Image?
As per Image.
How was your experience with it?
When used on a strongly tightened Screw, it can be safely and securely removed.
The licked Screw was removed.
It is also useful for DIY Screw removal.
[Points to note]
When used on a licked Screw, it is best to beat it in with a Hammer before use.View Detail
THE LARGEST
SHOP IN JAPAN
EXCLUSIVE COUPONS,
SALE, DEALS
FAST, RELIABLE
SHIPPING