1.32 USD
(200 JPY)
1.3~ USD
(197 JPY)
(2% OFF)
5 (10 Reviews)
Average
KL 250 Sherpa's Rear brake reservoir for fine adjustment of tank position【What made you decide the purchase?】
In SUPER SHERPA, Rear brake reservoir Tank is close to Exhaust pipe, Diaphragm heat, Diaphragm reservoir tank deforms and there is a chronic disease where Fluid leaks.
Although countermeasures are available from Manufacturer, in order to reduce the influence of heat even a little, buy this product to keep the position from the Exhaust pipe away.
【How was it actually used?】
It is an ordinary M6 Spacer with an outer diameter of 18 mm and a thickness of 5 mm.
However, because there are not so many Spacers of Size like this, I appreciate KITACO who lineup many products that can reach itchy places.
【Mounting was difficult?】
It is easy because it just removes Screw of M6.
【Please tell me the installation point and hang】
Be careful not to skew the reservoir tank when removing the Screw stopping the reservoir Tank because air may get mixed in.
[Is there anything I was disappointed about?]
It was possible to keep it away from the Exhaust pipe by 5 mm and I felt that I fulfilled the goal! Hey, Hose interfered with Frame.
Although it seemed not to be pressed strongly, since it is possible that Hose may hurt due to vibrations etc. I removed it crying.
I wonder if it was 3 mm?
【Hope for Manufacturer - Please let me know if you have any improvement points]
None
【Have you compared items?】
None
[Others]
Frequently check the reservoir Tank and if there is any abnormality in appearance it is only necessary to exchange...
Reviews For K-CON Aluminum spacer for M6 Screw From Other Webike User
Excellent
Used as a color for CaliperBecause the Rotor of RADIAL CALIPER was made Large, Caliper's You can use this collar in the Bolt section to fit a Large diameter Rotor. I'm ready! These colors are very useful.View Detail
Excellent
PurchaseBecause Clank master's Tank is likely to come in contact with Inner cowl, we secured Clearance with this Aluminum spacer and made interference prevention. KITACOConvenienceParts are rich in kind and saved.View Detail
Excellent
Was it more reliable than Washer?I bought it as a substitute in the place where 3 sheets of polycarbonate Washer of 1 mm are used repeatedly. After all, Aluminum thinks it is a good product because it is perfect. This is cheap, I wish I could have bought it.
Since Washer does not cost 100 yen on 10 sheets, it is expensive compared to it, but it is well MotorcycleParts so it is rather cheap.View Detail
Excellent
KITACO's SpacerIt is Spacer of KITACO.
Since there are various Size, you can choose Size that suits your purpose.
I purchased Car for Akira for Axel Pedal, but if I buy an OEMOP item I will do it more than 2000 yen, but in this case it fits within 500 yen.View Detail
Most Viewed Reviews Of K-CON Color Spacer Shims
Excellent
Fantastic...These small spacers are fantastic! The finish on the anodising and precision of the maching is perfect and they come in these wonderful little packages that are a joy to look at.They were great value too, compared to other options I looked at.Would highly recommend these if you are looking for spacers.View Detail
Excellent
好用的配件这款webike购买的K-CON 防振橡皮是用来替换我摩托车上已经老化开裂的橡胶垫的,我找了很久才在webike上面找到它,规格大小描述的很清楚,接下来就是希望它耐用不会很快就裂开了。View Detail
Excellent
Used for Cowl fastening points[How is it used?
Used at the fastening point of Under Cowl.
How was your experience with it?
This Rubber Collar is placed between the collar and the part that is fastened with Bolt to fix the Cowl.
Cowl's Wobble will be suppressed.
It's easy to get at the supply store and is very helpful.View Detail
Excellent
I'm trying to get Lever to stop rattling![How is it used?
We are playing Enduro with Off-road motorcycle.
I was looking for something like a Shim for my Clutch lever, and I found this product. And I bought it.
Was the one you received as per Image?
As per Image
Was the installation difficult?
Remove the Pivot and after cleaning, apply a thin coat of Grease and insert the Shim here and you're good to go.
How was your experience with it?
The lever that was moving up and down stopped moving and became able to cut smoothly.
I'm happy with the Large variant because of the way I run and play with the Clutch a lot.
[Included Parts:were they on?
Not particularly
[Was there anything that disappointed you?
Not particularly
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
Measure the shaft diameter of your Pivot before you buy it. I made a mistake once and bought an M6.
ZETA's Clutch perch was an M8.View Detail
Other Reviews From Japan User(translated)
Excellent
Radipon handled in Mild?attachment
The CBR650R is mounted at the same position angle as the NORMAL.
However, when the handlebar was cut to the Left lock, it interfered with the interior cover next to the Meter, so the interior cover was cut away.
I also purchased a 45° angled banjo adapter for the mesh hose to accommodate the tension of the mesh hose.
・NORMAL (Reserve integrated horizontal master) Impressions of
No complaints on public roads. Familiar feel and very easy to handle.
However, when the brake is set to "hard brake," the rate of increase in braking force relative to the input seems to decrease, and the brake becomes more forceful.
Radipon (Reserve separate body portrait master) Impressions of
It was totally different from what I expected, my expectation was that it would feel like a Rear brake…
It is really a mild and easy-to-handle radipon.
On public roads, it feels like NORMAL! I wonder if it's because NORMAL is the same NISSIN?
But I felt the radipon effect from Breaking a little stronger, and
It can be hung up to a hard brake without effort.
I felt trust that this could stop.View Detail
Very Good
packtalk bold Attached MountI purchased this for use with multiple Helmets. 。
Mount included with the BOLD.
Microphone and speaker are not included and must be purchased separately.View Detail
Excellent
Grip replacementGrip that had been used for a long time was worn out and had to be replaced.
They are soft and dampen vibration.View Detail
Very Good
Works well in everyday life[How is it used?
Used to lick Screw loose.
Was the one you received as per Image?
As per Image.
How was your experience with it?
When used on a strongly tightened Screw, it can be safely and securely removed.
The licked Screw was removed.
It is also useful for DIY Screw removal.
[Points to note]
When used on a licked Screw, it is best to beat it in with a Hammer before use.View Detail
THE LARGEST
SHOP IN JAPAN
EXCLUSIVE COUPONS,
SALE, DEALS
FAST, RELIABLE
SHIPPING