10.98 USD
(1,661 JPY)
4 (2 Reviews)
rating breakdown
5 Stars |
|
0 |
4 Stars |
|
2 |
3 Stars |
|
0 |
2 Stars |
|
0 |
1 Stars |
|
0 |
Very Good
To prevent High flasher!With purchase of LED Blinker of GLADIUS 650400, I bought this product.
I think that there are various ways to prevent High flasher by LEDization, but I think that it is the easiest to put a Register in the middle.
I connect LED Blinker and Register, but I used Space unexpectedly. Also we need a place for Body.
Although Cable is divided into two branches, I am worried a little whether I will cut off when a heavy load such as pull is applied.
There is no problem in function.
Reviews For ALCAN hands Register / 25W for LED Blinker From Other Webike User
Very Good
To make Blinker LED.This product prevents high flasher by wiring an interrupt between Harness and Blinker when making Blinker an LED.
Simply as many as Blinker are needed, but Quantity : Since two sets are in one set, if both before and after Quantity : 2 Set, if only before or after Quantity : 1 Set is enough.
You can understand how to install it by looking at the back side of Package.
From the kindness, Bullet Terminal was attached in advance, but in my environment it was too thin to use it, so I had to change it to Emon which I had.
(Do not bundle it without installing it)
Also, "Close the Bolt to the Gold genus part of the car body" And BodyHeat sink has two holes, but in Screw for Motorcycle it is big in diameter and does not fit in the hole of this product. (Both holes have the same large hole. )
I, Screw on hand, Nut for PC with matching diameter Is it the base of the motherboard? I managed to install it.
If this hole is more Large, it is very disappointing that we can fasten it together with Bolt of the car body. (Manufacturer was also going to do so, is not it?
Bullet Terminal and mounting holes were a little troubling, so we reduced ★ by 1.
Activation itself works without problems, so do not worry as Bullet Terminal replacement code is longer.View Detail
Most Viewed Reviews Of ALCAN hands Turn Signals
Excellent
very goodThe other previously purchased LED blinker of another company has gone out in about one year and one out of four (4 out of 16) For.
Buy this item of the same form this time
Length is a bit short, but we are satisfied because construction and brightness are better than previous ones.
So, how long this LED Blinker will last,
I expect it..View Detail
Very Good
I made it to LED Blinker!We installed LED Blinker on GLADIUS 650400.
Length is almost the same as OEM, but the depth is short and it became very impressive Sharp.
The coloring is also very bright, beautiful and good feeling.
There is no rain invasion at the moment, and it is generally a satisfactory item.View Detail
Very Good
To make Blinker LED.This product prevents high flasher by wiring an interrupt between Harness and Blinker when making Blinker an LED.
Simply as many as Blinker are needed, but Quantity : Since two sets are in one set, if both before and after Quantity : 2 Set, if only before or after Quantity : 1 Set is enough.
You can understand how to install it by looking at the back side of Package.
From the kindness, Bullet Terminal was attached in advance, but in my environment it was too thin to use it, so I had to change it to Emon which I had.
(Do not bundle it without installing it)
Also, "Close the Bolt to the Gold genus part of the car body" And BodyHeat sink has two holes, but in Screw for Motorcycle it is big in diameter and does not fit in the hole of this product. (Both holes have the same large hole. )
I, Screw on hand, Nut for PC with matching diameter Is it the base of the motherboard? I managed to install it.
If this hole is more Large, it is very disappointing that we can fasten it together with Bolt of the car body. (Manufacturer was also going to do so, is not it?
Bullet Terminal and mounting holes were a little troubling, so we reduced ★ by 1.
Activation itself works without problems, so do not worry as Bullet Terminal replacement code is longer.View Detail
Very Good
Refreshing!Because NORMAL was quite strong,
It looks pretty refreshing and it got better.
I of ODAXODAX. C Blinker Relay
For SUZUKI 7 Pin Type with simultaneous purchase,
I go crisply with installation, no problem.
I am satisfied with the Custom of light feeling.View Detail
Other Reviews From Japan User(translated)
Excellent
Radipon handled in Mild?attachment
The CBR650R is mounted at the same position angle as the NORMAL.
However, when the handlebar was cut to the Left lock, it interfered with the interior cover next to the Meter, so the interior cover was cut away.
I also purchased a 45° angled banjo adapter for the mesh hose to accommodate the tension of the mesh hose.
・NORMAL (Reserve integrated horizontal master) Impressions of
No complaints on public roads. Familiar feel and very easy to handle.
However, when the brake is set to "hard brake," the rate of increase in braking force relative to the input seems to decrease, and the brake becomes more forceful.
Radipon (Reserve separate body portrait master) Impressions of
It was totally different from what I expected, my expectation was that it would feel like a Rear brake…
It is really a mild and easy-to-handle radipon.
On public roads, it feels like NORMAL! I wonder if it's because NORMAL is the same NISSIN?
But I felt the radipon effect from Breaking a little stronger, and
It can be hung up to a hard brake without effort.
I felt trust that this could stop.View Detail
Very Good
packtalk bold Attached MountI purchased this for use with multiple Helmets. 。
Mount included with the BOLD.
Microphone and speaker are not included and must be purchased separately.View Detail
Excellent
Grip replacementGrip that had been used for a long time was worn out and had to be replaced.
They are soft and dampen vibration.View Detail
Very Good
Works well in everyday life[How is it used?
Used to lick Screw loose.
Was the one you received as per Image?
As per Image.
How was your experience with it?
When used on a strongly tightened Screw, it can be safely and securely removed.
The licked Screw was removed.
It is also useful for DIY Screw removal.
[Points to note]
When used on a licked Screw, it is best to beat it in with a Hammer before use.View Detail
THE LARGEST
SHOP IN JAPAN
EXCLUSIVE COUPONS,
SALE, DEALS
FAST, RELIABLE
SHIPPING