20.53 USD
(3,105 JPY)
19.63 USD
(2,970 JPY)
(4% OFF)
4 (6 Reviews)
Excellent
CYGNUS X3 Taiwan Spec. The mountingBuy with Exhaust System replacement.
There are also various types of attached Bolt, Instruction Manual is kindness itself.
Installation can be done in 5 minutes.
Because Color is abundant, it is good to enjoy various things!
Reviews For KOSO KOSO Universal Exhaust Slider [Silver] From Other Webike User
Very Good
GoodI installed it on CYGNUSX (1YP2). I crashed a little while ago and installed SP Tadao's Exhaust System pretty well.
I scratched it, and installed it just in case I had to replace the Exhaust System.
There are many screws and two colors. I don't like them sticking out too much, so I chose No Color.
I installed the exhaust pipe and Slider, there is not much room for clearance with the ground and Slider
I think I'm going to add some color to it.
I think the design is good without looking bad, but it would be even better if the price was a little lower.View Detail
Excellent
I think that it is a guardian of Silencer.Before ordering, the price was cheap so I did not expect much. The real thing is built quite reliably, and it corresponds to M 8 ? M 10 Bolt. M8 Bolt's Adapter is certain and can be fixed without rattling. Since the moss is not yet mossed, the actual strength is unknown, but it seems to protect Silencer of Liter machine without problems if slow moss. Because it is a Type that can separate the ground part and Body, we would like you to sell replacement Parts of the ground part. There are only items that KN plan deals with, and Cost performance is the best.View Detail
Very Good
SatisfiedI installed it in ninja 1000. Aluminum and Slider's resin texture is also satisfying Quality. The price is also cheap, COSPA is also good. Since the attached M10 × 60 Screw is short, I bought 70 mm Screw. I am satisfied with the overall review.
View Detail
Average
We will protect Silencer by standing gobble!In my Motorcycle history I felt that the stall of the stall was 1, the slope road parking Neutral, the STAND off going out one time, the other car fallen overwhelmingly once, a fall in the corner ring, a collision with Truck... Opponent getaway... Conviction at trial!) Once. Well there were many.
Each time Motorcycle gets scratched.
The Engine side has a Babyface Slider, but if it is only that surely Silencer will pass away...
I bought this product by that.
SilencerQuantity : Quantity if there are 2pc : 2 Set necessary.
Attached is M8 × 40 M8 × 60 M10 × 40 M10 × 60 Bolt and Color.
Ninja 1000 is just right for M10 × 60.
Color seems to be Silver, Black, Gold, Orange, Blue, Red.
This time Silver. It fits well with the car body.
I do not want to take care of me, but I feel secure.
Although it can divide the pedestal and the resin part, can not purchase only the resin part or stated, so it is not reusable?
Would it be okay if it was an integrated type?
Not good for resin molding. BALI BALIBALI. MORIWAKI's Skid Pad was awesome. MotorcycleParts looks great in Large things. Aluminum grinding is nice though it is nice feeling.
View Detail
Excellent
It is cheap insurance!I purchased it with the minutes of ZEPHYR and it is attached to '95 Zr. Like the other Impression, it is really cheap as insurance when falling down of Exhaust Chamber and Exhaust System, Cost performance is the best !!
When I was ZEPHYR, I did not think of anything, but when my Zr was at the mounting position, the Spacer was also part of Exhaust ChamberBracket, so when using the attached SpacerBolt Bolt is short or long - - - I replaced it with my own Aluminum spacer.
Since the attached Spacer has the same Size, if one Spacer is half Length × 2, Universality further increases and should be the best product for the purchaser side!View Detail
Most Viewed Reviews Of KOSO Engine Slider / Frame Slider
Very Good
Grom JC61 '15Used for Grom JC61
I bought this for the guard of my Yamamoto racing muffler in case of falls.
The Bolt that comes with this kit or the Bolt on the Yamamoto racing muffler is not long enough, so you can use a Bolt that is 10mm longer.
If you want to add color, you need to make it longer for the color.View Detail
Average
I don't know the effect yet.Fortunately I haven't had any mishaps since I installed it, so I don't know if it works or not. if you can install it under the exhaust system, you can guard it perfectly. I don't think it's durable, so you may have to replace it every time you have a mishap.View Detail
Very Good
GoodI installed it on CYGNUSX (1YP2). I crashed a little while ago and installed SP Tadao's Exhaust System pretty well.
I scratched it, and installed it just in case I had to replace the Exhaust System.
There are many screws and two colors. I don't like them sticking out too much, so I chose No Color.
I installed the exhaust pipe and Slider, there is not much room for clearance with the ground and Slider
I think I'm going to add some color to it.
I think the design is good without looking bad, but it would be even better if the price was a little lower.View Detail
Very Good
I'm a little disappointed that I haven't scratched that itch.[How is it used?
Currently in use after installation.
Was the one you received as per Image?
I was surprised to see that there were more bolts and colors included than the Image, and that the instructions were well written.
Was the installation difficult?
It's easy to install, but as you say, the Bolt length is too short to be effective as a Slider.
The Bolt is available in two sizes, 40mm and 60mm for both M8 and M10. I thought it was kind, but the length was not enough to fix the top of the exhaust system via Bracket, so I had to extend it.
I measured and installed 95mm Bolt and φ22×14mm Aluminum Collar after purchasing them separately.
How was your experience with it?
The existence itself is wild, but in the unlikely event that you think about the cost of replacing Silencer, on the contrary, it's starting to look cute! (Lol)
The effect of Slider is unknown because it has not been verified yet.
[Included Parts:were they on?
For M8Bolt, collar and conversion collar included.
[Was there anything that disappointed you?
None in particular
Other items that would be helpful
I hope Manufacturer will release Long boltType or SliderSingle Item only with lower price separately from this product.View Detail
Very Good
It's universal, so the effect seems to be mixed.I'm using it on my GSX250R.
It was installed in the place where the Exhaust Band is fixed.
You will need to purchase a longer Bolt because the included Bolt is too short to install in the first place.
The effect is so-so and solid that it seems to protect you, but I'm a little worried about it. . You shouldn't trust in Overlarge.View Detail
Other Reviews From Japan User(translated)
Excellent
Radipon handled in Mild?attachment
The CBR650R is mounted at the same position angle as the NORMAL.
However, when the handlebar was cut to the Left lock, it interfered with the interior cover next to the Meter, so the interior cover was cut away.
I also purchased a 45° angled banjo adapter for the mesh hose to accommodate the tension of the mesh hose.
・NORMAL (Reserve integrated horizontal master) Impressions of
No complaints on public roads. Familiar feel and very easy to handle.
However, when the brake is set to "hard brake," the rate of increase in braking force relative to the input seems to decrease, and the brake becomes more forceful.
Radipon (Reserve separate body portrait master) Impressions of
It was totally different from what I expected, my expectation was that it would feel like a Rear brake…
It is really a mild and easy-to-handle radipon.
On public roads, it feels like NORMAL! I wonder if it's because NORMAL is the same NISSIN?
But I felt the radipon effect from Breaking a little stronger, and
It can be hung up to a hard brake without effort.
I felt trust that this could stop.View Detail
Very Good
packtalk bold Attached MountI purchased this for use with multiple Helmets. 。
Mount included with the BOLD.
Microphone and speaker are not included and must be purchased separately.View Detail
Excellent
Grip replacementGrip that had been used for a long time was worn out and had to be replaced.
They are soft and dampen vibration.View Detail
Very Good
Works well in everyday life[How is it used?
Used to lick Screw loose.
Was the one you received as per Image?
As per Image.
How was your experience with it?
When used on a strongly tightened Screw, it can be safely and securely removed.
The licked Screw was removed.
It is also useful for DIY Screw removal.
[Points to note]
When used on a licked Screw, it is best to beat it in with a Hammer before use.View Detail
THE LARGEST
SHOP IN JAPAN
EXCLUSIVE COUPONS,
SALE, DEALS
FAST, RELIABLE
SHIPPING