6.08 USD
(920 JPY)
4 (3 Reviews)
Average
CaliperOverhaulI overlauled Caliper, so I watched Pad pin with stages, so I purchased it. It was bremboOEM so I could use it without worry.
Reviews For brembo Pad Pin From Other Webike User
Very Good
Replace with new oneThe surface of the brake was rusty and dirty during maintenance, so we replaced it with a new one. The parts used are sold as a single item, which is a big help since they can be replaced with new ones.View Detail
Excellent
So it's consumable.The current second generation BremboCasting caliper has been in use since July of 2013.
In about 8 years, it has been in operation for 120 days and used for about 15,000 km.
The maintenance of the brake area is just cleaning the disc after each run, and I have not done the usual maintenance that everyone does, such as taking apart the calipers and removing the pads.
Even if Beta pin had fallen off, I did not care about it so much because Pad pin was pressed in, but when I removed it to replace Pad spring this time, the corrosion was more severe than I expected. ・・・・
I was going to lightly polish it and reuse it, but then I decided to throw in the Brembo OEM Pin that I had in stock.
It was easy to remove the pin from the reverse side by tapping the thin HEX tip with a hanghang.
Installation was also a little tapping and then press fit with WaterPliers. It is easy.
I sprayed the new Pin with AZ's quick drying Silicone Spray and lightly wiped it down before installing it.
I'm happy with the cleanliness.View Detail
Most Viewed Reviews Of brembo Pad Pins
Very Good
Replace with new oneThe surface of the brake was rusty and dirty during maintenance, so we replaced it with a new one. The parts used are sold as a single item, which is a big help since they can be replaced with new ones.View Detail
Excellent
So it's consumable.The current second generation BremboCasting caliper has been in use since July of 2013.
In about 8 years, it has been in operation for 120 days and used for about 15,000 km.
The maintenance of the brake area is just cleaning the disc after each run, and I have not done the usual maintenance that everyone does, such as taking apart the calipers and removing the pads.
Even if Beta pin had fallen off, I did not care about it so much because Pad pin was pressed in, but when I removed it to replace Pad spring this time, the corrosion was more severe than I expected. ・・・・
I was going to lightly polish it and reuse it, but then I decided to throw in the Brembo OEM Pin that I had in stock.
It was easy to remove the pin from the reverse side by tapping the thin HEX tip with a hanghang.
Installation was also a little tapping and then press fit with WaterPliers. It is easy.
I sprayed the new Pin with AZ's quick drying Silicone Spray and lightly wiped it down before installing it.
I'm happy with the cleanliness.View Detail
Very Good
Let's replace it once in a while.As we all know, the Pad pin wears out and dents the contact area with the Pad, so sometimes you can't do that. It's a good idea to replace it, as TitaniumPin is prone to wear and tear. I think OEM Pin is safe. By the way, but brembo's β Pad pin of the type that stops with Pin is the βPin. beta;Pin's Wiringmust. Brembo has announced that they should do the same. I am. If you don'tβPin off→Pad pin off→Pad dropout& rarr;good-bye, with Corner after Willy without Willy. I know of an example of a no-BrakeCrash.View Detail
Other Reviews From Japan User(translated)
Excellent
Radipon handled in Mild?attachment
The CBR650R is mounted at the same position angle as the NORMAL.
However, when the handlebar was cut to the Left lock, it interfered with the interior cover next to the Meter, so the interior cover was cut away.
I also purchased a 45° angled banjo adapter for the mesh hose to accommodate the tension of the mesh hose.
・NORMAL (Reserve integrated horizontal master) Impressions of
No complaints on public roads. Familiar feel and very easy to handle.
However, when the brake is set to "hard brake," the rate of increase in braking force relative to the input seems to decrease, and the brake becomes more forceful.
Radipon (Reserve separate body portrait master) Impressions of
It was totally different from what I expected, my expectation was that it would feel like a Rear brake…
It is really a mild and easy-to-handle radipon.
On public roads, it feels like NORMAL! I wonder if it's because NORMAL is the same NISSIN?
But I felt the radipon effect from Breaking a little stronger, and
It can be hung up to a hard brake without effort.
I felt trust that this could stop.View Detail
Very Good
packtalk bold Attached MountI purchased this for use with multiple Helmets. 。
Mount included with the BOLD.
Microphone and speaker are not included and must be purchased separately.View Detail
Excellent
Grip replacementGrip that had been used for a long time was worn out and had to be replaced.
They are soft and dampen vibration.View Detail
Very Good
Works well in everyday life[How is it used?
Used to lick Screw loose.
Was the one you received as per Image?
As per Image.
How was your experience with it?
When used on a strongly tightened Screw, it can be safely and securely removed.
The licked Screw was removed.
It is also useful for DIY Screw removal.
[Points to note]
When used on a licked Screw, it is best to beat it in with a Hammer before use.View Detail
THE LARGEST
SHOP IN JAPAN
EXCLUSIVE COUPONS,
SALE, DEALS
FAST, RELIABLE
SHIPPING