I used it for NSR 250. Compared to OEMHandlebar, it is light aluminum, so it is luxurious as it is Aluminum Cut-out. Also, I think that it is also good to choose colors in combination with Handlebar. It was good as it was easy to install!
* The BEST and MUST store to find Japanese parts.
* Register now for amazing deals and other special offers!
* Over 800,000 listed items. It's hard NOT to find your parts.
Congratulations! Your new account has been successfully created! You can now take advantage of member privileges to enhance your online
shopping experience with us. If you have ANY questions about the
operation of this online shop, please email Webike through CONTACT US.
A confirmation has been sent to the provided email address. If you
have not received it within the hour, please contact us.
5 / 5
1 Review
rating breakdown
5 Stars | 1 | |
---|---|---|
4 Stars | 0 | |
3 Stars | 0 | |
2 Stars | 0 | |
1 Stars | 0 |
I used it for NSR 250. Compared to OEMHandlebar, it is light aluminum, so it is luxurious as it is Aluminum Cut-out. Also, I think that it is also good to choose colors in combination with Handlebar. It was good as it was easy to install!
Fits: YAMAHA SR400 19 B9F3 RH16J, YAMAHA SR400 19 B9F1 RH16J, YAMAHA SR400 01-08, YAMAHA SR400 10-21
This kit made replacing my OEM handlebar very easy. All parts were good quality, and the new cables and brake hose were cut to the perfect length. I highly recommend this kit for those wanting a straight-forward option to giving your bike the cafe-racer look. This was installed on my 2015 Yamaha SR400.View Detail
Fits: YAMAHA SR400 19-21, その他 Universal, YAMAHA SR400 19-21, YAMAHA , YAMAHA
세퍼레이트 핸들을 설치하려고 샀습니다. 세퍼레이트 핸들을 설치하려면 핸들만 있어서는 안됩니다. 브레이크, 스로틀, 클러치, 데컴프레션 용 숏 케이블이 있어야 하고 핸들 스토퍼가 있어야 합니다. 세퍼레이트 핸들의 설치방법은 구글에서 오메가레이서를 검색하시면 쉬울겁니다. 이 핸들은 각도 조절이 가능한 핸들입니다. 설치 후에 나에게 맞게끔 핸들의 각도를 조절할 수 있습니다. 마감과 품질은 괜찮은 편입니다.I bought a three-rate handle to install. You should not only have a handle to install the three-rate handles. There must be a short cable for the brakes, throttle, clutch, and compressor, and the handle stopper must be present. The installation of the sedan handle will be easier for you to search for Omega Racers at Google. This handle is an angle adjustable handle. After installation, you can adjust the angle of the majgeggeum handle to me. The quality of the closure is good.Translated by Microsoft TranslatorView Detail
I bought this product because it is a trusted DAYTONABrand. When I used it, I felt that the Bolt did not tamper and was very accurate.View Detail
Fits: YAMAHA SR400 19 B9F3 RH16J, YAMAHA SR400 19 B9F1 RH16J, YAMAHA SR400 01-08, YAMAHA SR400 10-21
The quality is good and the product is from a reliable Manufacturer.
Position changes considerably, and the posture becomes more forward leaning.
Compared to the separate handle of yzf-r25, the position is lower, the Sauce angle is also there, and I feel that the Handlebar under the Top Bridge makes such a difference.
Sauce angle doesn't seem to be too much, but if you ride long enough, your wrist will hurt.
I think it is a little difficult to ride, but I think that is one of the best parts of Motorcycle.View Detail
[How is it used?
I had a hexagonal Socket for motorcycle maintenance, but there were places where I couldn't use it for long periods of time, so I bought a new, shorter one.
Since I use a different one in Main, I chose the inexpensive and reliable DAYTONA one for now.
Was the one you received as per Image?
As you can see in the picture, it comes with a socket holder, so you don't have to worry about storage.
How was your experience with it?
The Socket and Holder are fixed too Firmly, so it is a little difficult to remove the Socket of each Size. I think this is the difference from famous manufacturers. I think that is the difference from famous manufacturers.
As for the usability of Others, it is quite normal.
There were no particular problems with Bolt or the tool licking.
[Points to note]
I don't want to make a mistake! If you don't want to make a mistake, I think it's safe to choose a good tool manufacturer. (This is not to say that this product is not good.)
I think the precision of the engagement with the bolt and so on is different. I don't know.
How did it compare to other products?
Compared to the one I have, the Socket felt hard to remove.
If you are a frequent user, this may be a bit of a concern.
【Review】
It is inexpensive and the quality was fine.
If you want to tinker with Motorcycle on holidays, you can use it without any problem.View Detail
Purchased for regular replacement.
If it were a little cheaper, I could get a stable replacement...View Detail
?attachment
The CBR650R is mounted at the same position angle as the NORMAL.
However, when the handlebar was cut to the Left lock, it interfered with the interior cover next to the Meter, so the interior cover was cut away.
I also purchased a 45° angled banjo adapter for the mesh hose to accommodate the tension of the mesh hose.
・NORMAL (Reserve integrated horizontal master) Impressions of
No complaints on public roads. Familiar feel and very easy to handle.
However, when the brake is set to "hard brake," the rate of increase in braking force relative to the input seems to decrease, and the brake becomes more forceful.
Radipon (Reserve separate body portrait master) Impressions of
It was totally different from what I expected, my expectation was that it would feel like a Rear brake…
It is really a mild and easy-to-handle radipon.
On public roads, it feels like NORMAL! I wonder if it's because NORMAL is the same NISSIN?
But I felt the radipon effect from Breaking a little stronger, and
It can be hung up to a hard brake without effort.
I felt trust that this could stop.View Detail
I purchased this for use with multiple Helmets. 。
Mount included with the BOLD.
Microphone and speaker are not included and must be purchased separately.View Detail
Grip that had been used for a long time was worn out and had to be replaced.
They are soft and dampen vibration.View Detail
[How is it used?
Used to lick Screw loose.
Was the one you received as per Image?
As per Image.
How was your experience with it?
When used on a strongly tightened Screw, it can be safely and securely removed.
The licked Screw was removed.
It is also useful for DIY Screw removal.
[Points to note]
When used on a licked Screw, it is best to beat it in with a Hammer before use.View Detail
To continue viewing this product on Japan domestic webike (in Japanese), press "Go to Japan Domestic".
Customer Service
INFORMATION
THE LARGEST
SHOP IN JAPAN
EXCLUSIVE COUPONS,
SALE, DEALS
FAST, RELIABLE
SHIPPING