Since I wanted to finish planning to make it Yamaha Inter Color from before purchasing the car body, I wanted to finish it cool with OEM, so I dared not to paste the two places of Fork Guard and Swingarm.
By the way, the White part of Headlight cowl is sticking another Manufacturer object instead of MDF's Decal (There is no Decal of this White part in MDF)
■ Point of work
- There is no problem if you proceed according to the polite Instruction Manual.
- It is NG who blows Parts cleaner to Large quantity in Plastic part, Tissueetc. OK in a small amount.
- Start with small parts to get used to Small and make it easier to postpone the complicated parts and the bigger parts of the area. (In particular, it is better to put it as far as the curved surface part, Light cowl ⇒ Tail cowl ⇒ Side cover ⇒ FFender ⇒ Shroud)
- If there is no soft Squeegee and Dryer at the tip, the curved part can not be pasted on Beauty first.
- Immediately after sticking, raining, car wash, waxing etc etc etc etc. Be careful as it may be hurt by.
- It is desirable to leave it for 2 to 3 days until it is completely fixed (In the meantime, although it stretched and pasted part, it returns to original)
○ good point
- I am safe even if the description of Instruction Manual is polite for the first time.
- Decal's thickness is thinner than imagined Design for emphasis on ease of pasting.
- High convenience that you can easily make Makeover by preference.
Attention point
- It is a feature for WR, the tip of the FFenderCenter part is very thin and it is Dustclothetc. Danger in hanging on hook Large.
- Depending on the location, there are several parts that do not fit slightly with Body line.
- Decal Print at several places in the end part Gap (?) Yes.
- "MDF" The logo of too many impressions (In particular, it is better not to have Logo of Shroud part)
Faded etc etc. Although the durability performance will be verified in the future, if you want a greed a bit more price is cheap, I want a design variation.
In addition to the color change, for example, if more than one DesignPattern is prepared at one place, I think that further combination can give Originality and I think purchasing willingness will rise even more than now. If you like the design that was prepared from the beginning, this product which can easily change the image is considered to be very useful and highly satisfactory as the product value.
Although I wrote various things, it was a very enjoyable time to imagine a complete image of my car before purchasing!
Fits: YAMAHA WR250X 08-, YAMAHA WR250X All years
The MDF Graphic decal here was preparing the thing of almost all vehicle types, was good and stuck the thing for the Cover of a Front fork this time. [ the Design's ]Since what is called Squeegee was sold to attachment, when it used, it could also do easily, looked nice and became smart.Although several kinds were purchased and being stuck, it became a NORMAL, so that it improved
.I think that only a required place may purchase the direction of purchase especially since it is big-ticket if a number of points are purchased also although a few will become cheap and it will call it a Decal if it purchases by a Set.Especially an Off vehicle and a MOTARD are [ coming to improve ] very pleasing.View Detail
Fits: YAMAHA WR250X 08-, YAMAHA WR250X All years
Although the exterior was exchanged for the thing of the Y's Gear, since the Rear fender was lonely, this product was stretched.Structure is solid, and it is very beautiful and pleasing.However, awkward human being [ like / when also sticking molding about a Rear fender / me ] he is suffered troubles.I thought that I would send to an attachment Service since I think it impossible to stick by myself when sticking a Shroud.View Detail
THE LARGEST
SHOP IN JAPAN
EXCLUSIVE COUPONS,
SALE, DEALS
FAST, RELIABLE
SHIPPING