First of all OGK products SHOEI - I think that it is very good also in terms of COSPA as it provides cheap related parts as compared with ARAI.
I wanted to make the face invisible, such as waiting for a signal, so choose the most dense Smoke color.
It is satisfying because there is nothing like looking almost at the face from the outside with this.
Light smoke is standard equipment in Aero Blade 3, but it is the same as Clear unless you try to compare it side by side with just a little Smoke mixed in Clear.
In the case of the darkest Smoke, the visibility from daytime to evening is not a problem but after all the nighttime zone is not invisible, but it is very hard to see and it is dangerous, so we do not recommend use.
In the same way, attention is necessary because it becomes difficult to see in Tunnel even during the daytime.
Shield is a consumable product. First of all, this is a Large assumption.
No matter how carefully you handle it, insects and stepping stones will cause fine Scratch to get into it.
It should be replaced every season.
Sometimes, depending on the Manufacturer, if you buy the Shield in Rose, you'll get a slightly different Shield than the one that came with it from the original, whether it's a lot difference or something else. If it's a good change, it's fine, but if it's a bad one, it's depressing, but at least the OGK didn't have that problem. "View Detail
I chose medium smoke. [Color] The intensity of the smoke is good enough to be seen in the evening without blocking the view, and the privacy is just right. [Color] Smoke degree.View Detail
As usual, I parked the Helmet in the bike park at work with the Helmet holder secured to the Helmet holder. But one day, I found out that my shields were off and falling down …
The motorcycle parked next to me was caught and dislodged, or maybe it was a prank & HELLIP;
That's why the front is scratched and the part that holds it to the Helmet side is deformed.
So I bought it because I had no choice.
The Shield is used in the rain and wind, morning and night, so the Shield "[Color] Clear" selection
When it arrived, I realized again. (I remember.) thing.
that is "The Shield that came with Helmet from the start was not [Color] Clear. Light smoke That is.
So, sure, when I bought the Helmet new. Is that light smoke? I remember thinking, "I don't know," but after putting the two side by side often, it was clear to me.
And "[Color] Clear" The Light feels brighter than ever when you try to run at night with the
To be honest, I thought the GSX-S125 I'm riding now had a darker Light, but it's not so bad. I noticed that.
It wasn't the Motorcycle's fault that the Light felt darker, it was the Motorcycle's fault. It was the fault of Light Smoking Shield.
Again, my apologies, I'm sorry.
Oh, and I noticed when I was replacing the Shield, the new Shield is easier to install than the It means it can be removed.
I'm a man of the hour and a man of the moment. (To NORMALShield⇔Mirror shield) We may have to replace it, and it's been pretty stiff so far. (It makes my fingers hurt.) But this time, I was able to install and remove the Clear shield easily.
Somehow, in my own mind. The more you use it, the looser it gets. I thought it was a thing, but maybe it's the other way around, and it's the opposite, and it's going to get sloppy and deformed & rarr; it's going to get hard. It's coming, maybe it's going to be sibling.
I wanted to change my Helmet soon, but I made a new Shield. I'm going to have to put off buying a new one for a while longer. (Mesh Gloves, Rain jacket, etc., because there are more things I want.)View Detail
There is OEM's MiddleSmoke and the darkness that can be used even at night is good.
There is another dark Smoke, but here it seems that it can not be used Almighty, so it is enough for privately here.
With Light smoke of Standard Equipment, there was not so much sense of smoke, it was dull and strong, I was dissatisfied when it was fine, but MiddleSmoke is taken into consideration and it is easy to use.View Detail
I am using transparency without any problem, but my case is sorry
Just because the boundary of Pin Lock Shield came at the line of sight, everything will be a jama.
So, as you can see in the picture about 5 mm lowering the hole, open the hole and Pin Lock Shield itself
We raise the mounting position of, we use it so as not to enter the sight.
I found it installed, but because Pin Lock Shield came on top
The hat body and the pin lock interfere with each other, and it is good to tighten but the shield does not go up
Although I was impatient, by adjusting the Shield base, in my case I would not become a jamaism of sight,
It became usable without trouble.
I think that there are individual differences, so it is better to change the installation position after checking the place there
think
View Detail
THE LARGEST
SHOP IN JAPAN
EXCLUSIVE COUPONS,
SALE, DEALS
FAST, RELIABLE
SHIPPING