Previously, Material : It was Aluminum's Fender Eliminator, but it broke with vibration and the number dropped down as well.
So I examined it variously, so it seems like it will not break if this product, so I bought it.
There is only Universal Product, the position of the hole is important for installation
There is no problem as long as it is decided.
The visibility of this Tail lamp is also good.
It's been a year since I installed it, but there is no sign of cracking.
The compatibility with YOSHIMURA's Exhaust System is not good
In order to avoid hitting Number, I am sending it to Left, but with exhaust, the corner of Number is black...
I think it is more resistant to vibration than Aluminum Bracket's dedicated product.
I personally felt that the drilling process is easier than the Aluminum Bracket because I can work with Drill driver.
If it cracks due to vibration, I'd like to try Aluminum Bracket as well.
Lens is cool with Sharp Design. The color is Red and [Color] I decided to go with Red, which seemed brighter after comparing it with Smoke.View Detail
It is installed to GSX-R125:Because it is plastic, drilling and cutting are easy, and it seems to be light and strong against vibration Screw, Aluminum Collar and A lot of RubberSpacer etc. are included in the package I was able to convert it to full LED by combining it with the LED Blinker for 125View Detail
I installed it on a Chinese Yamaha XTZ125
The body of the motorcycle is not modified at all and the plastic holder and the bolt holes are made in the plastic holder I opened it in two places and installed it When this product is installed, because the Blinker of OEM cannot be attached, it is not possible to install Blinker separately You need to be prepared
By the way, Blinker is a MOTO LED LED Flasher Type 601 attached
It can be installed by simply drilling an 8mm holeView Detail
? 【What made you decide the purchase?】
Since the Lens of the Tail lamp of other Brand Product which had been attached up to now has broken, it seems time has passed since the manufacture is already finished and the replacement part can not be found, so Tail lamp and Bracket (Holder) We decided to exchange every.
First, I searched for Tail lamp with low power consumption LED. And universal Bracket which can also be attached to the off-road motorcycle (Holder) I chose this item on condition that it can be used. In the case of Off-road motorcycle, it will be attached to Rear's MudguardCowl, considering that the drilling for Blinker installation is easy to work, lightweight Material : I thought Plastic's Bracket is better. In this Tail lamp also Bracket for installation is made by Gold Genus, but since the car model is limited, Universal Plastic Bracket is standard Included Parts : It is one of the decisive factors to be. It was also an important point that License Plate Light is on.
? 【How was it actually used?】
As shown in the attached image, fitting fits perfectly, there is no discomfort at all. I do not feel heavy feeling from behind with SMART, I think that it is a design that fits firmly into Road. A reasonable number of LEDs are used, it is bright as a Tail lamp, and it looks more clear in Stop-lamp. Since Motorcycle is Battery reply, I chose LED Lamp with low power consumption, but the part of power consumption does not know honestly the influence. Since other transmission systems cause malfunction or originally, it seems that there was enough power generation.
? 【Was it difficult to install? (Hard parts case)】
Plastic's Bracket (Holder) Processing was very easy with. Also, because the shape and the Largeness also fits perfectly with Mudguard's Rear cowl, positioning was not troubled. Particularly included screws, Washer, RubberWasheretc. There is abundance, a little Gap can be filled enough, and it can fix more perfectly without wobble.
? 【Please tell me the point of installation and hang (in the case of Hard parts)】
When installed in the position just hidden behind Cowl of Mudguard, the sunlight or other light does not strike the Lamp, it becomes shade and a sharp feeling when lighting up comes out. Also, there is a flat part on the side of the Bracket for Blinker installation, but since the area is not so wide, I think that Blinker and Mudguard will interfere in some cases. I reused Blinker of Other Brand Product I used to use, but I had to check the mounting position carefully geometrically. By checking the mounting position beforehand by temporarily assembling the hole, etc.. I think that it is important to position.
? Fit feeling and height when wearing ? Please tell me the weight etc (Apparel case) 】
? [Is there anything I was disappointed about?]
There is no point of disappointment. Meanwhile, it is necessary to attach Reflector according to regulations, and the Lens part of Tail lamp may have Reflector function, but we decided to add it separately for precaution. However, there was no space to install the Reflector, and the Reflector attached to the Bracket that I used was processed and attached in order to reuse it.
? [Request to Manufacturer ? Please let me know if there are any improvement points]
Plastic Bracket hiding in License PlateReverse side (Holder) A little stretched out Reflector mounted Quantity : I'd be happy to have it set. Also, the Bullet Type Terminal for the attached electric Wiring feels a little Large from the thickness of Wiring. Another SizeSmall Bullet Type Terminal is not enough.
? 【Have you compared items?】
There were several LED Tail Lamps cheap in price at other companies, but many of the Brackets for installation are offered by Gold Genus, conformed models are specified, and purchase has been suspended. There were some models that were not designated as compatible models, but I did not know whether there was universal nature, and as a result I selected this product.
? [Others]
The LED balls are all properly lit. I tried about 50 km, but the installation is also good with the lighting conditions. I am planning to run while checking the looseness of Screw and Nut for a while.
View Detail
Because it is a Universal Product, I will buy it as soon as possible.
It is not a commodity that is processed so precisely, but the plane part is distorted, or the Bracket holes are not lining horizontally.
The point to be aware of is that the width of the flat part is narrower than the OEM so that it can not reach the Screw hole of the Frame as it is.
Combined with Bracket somehow. (In terms of strength ...?
Blinker hole is engraved with TaperReamer and Cutter steadily.
XTZ is a 3-pole Coupler, so you can use OEM's TAB coupler. ConnectorPin is 110 type and OK.
The opening of the hole makes LeftBlinker look slanted.
View Detail
THE LARGEST
SHOP IN JAPAN
EXCLUSIVE COUPONS,
SALE, DEALS
FAST, RELIABLE
SHIPPING