?
Seat lock started playing, so I replaced it for this part.
AluminumSeat lock "Plus" in addition to conventional aluminum parts,
Material to be installed on the lock bar side : Spec attached with Plastic's Joint. It seems.
【appearance】
At first glance I was surprised by the processing accuracy and the beauty of the finish.
Aluminum parts are subjected to careful cutting processing with Anodized Treatment,
Resin Parts are sink marks found in Mold items and BALIetc. there is no.
Could it be cutting also here?
Although it is a Parts that disappears when assembled, it feels reliable on operation for high precision build.
【attachment】
Installation is possible only by removing Seat.
I think that I can work without problems since the instruction manual with polite photos is attached.
Required tools are Small Type Driver (+,-) And Radio pliers, M8's Box wrench etc..
I think that it is better to prepare Grease to paint on sliding parts.
If you are not familiar with it, you may be perplexed in removing the eRing that fixes the Cylinder,
I think that working carefully so as not to bend.
[Others]
Let's build up one by one and check the movement before placing the Seat.
Especially it is difficult to remove if putting the Seat with Spring's return insufficient due to a mistake in the installation.
【Feeling】
Although there was not Trouble in particular until now, by exchanging for this part, the movement was light and the operation feeling became reliable.
Outside Seat (cozy) Although the movement became somewhat somewhat after exchanging it, it was reduced concerning wear and breakage of Parts by exchanging for this part.
【Review】
Small Sana Parts used for invisible places, but politely, I think that it is processed to high precision, and it works Particularly.
It is a product with a sharp focus at the point where Manufacturer complements the part where hands did not turn like Cost.
Although the price is somewhat higher, it can be convinced enough when considering that it is a special product of the product quality and production end model.
This is what the OEM should have been, although i have had my 1994 Zephyr 750 since new and the plastic/resin oem lasted 28 years so the Bagus should last a very long time.Bagus and Ems post same price as buying an oem complete seat lock,Bagus is better,View Detail
I bought this product because of the advertisement. The installation was not very clear from the Instruction Manual that came with it. I had to be a little bit smart to install the White Zircon parts, because I couldn't install them on the body of the car after installing them on the Gold bars because of the clearance. So, I installed the White Zircon parts in the company housing and then fitted them to the Gold rods. As for the effect, I think it will be determined in the years to come. The movement is Smooth, so it seems to be OK in the beginning.View Detail
My Seat stopped working and after researching I came across this product and purchased it.
Seat managed to pry it open, replace the part, and it was fixed.
What kind of parts are they? I thought it was a part that I had been wondering about, and now the mystery is solved.
Just price highView Detail
Net information that the Seat on the Zephyr 750 will not be able to remove the Seat if some parts break The description caught my eye It certainly makes me wonder how to remove it if it breaks, phew! The Motorcycle I'm riding has never been replaced or serviced once since I bought it, so I'm not sure if I'll be able to get it off before it breaks I bought this product to replace it with (*It would have been nice to check the condition of the actual item beforehand.)
advantage
Plastic's Seat lock that has been deteriorating over time was partially scraped off, but it looks fine No Other Joint Parts (Photo No3) was on the verge of breaking in both places If I hadn't thought of replacing this product, I would have been unable to remove Seat at worst I'm glad
・Material:It's an aluminum Seat lock part, but it's solid and will last for a long time Item
I forgot to take a picture of the joint that is included in the package I forgot to take a picture of the joint with Key, but it's a little bit bigger than the original joint The shape is slippery and hard to break (Only one of them.)
The Instruction Manual is included in the package Then it's about 30 minutes of work (If you work on your own, you are responsible for your own work.)
Disadvantage
・Material:Aluminum Seat Lock products are a bit more expensive I think this is because I can't produce them myself, and the production process makes the price of gold more expensive That's why I'm happy with it It's a one-of-a-kind product because it's something that Makers don't produce
It would have been better if one of the joints had been included in the package (Normally, I don't need it because I divert it and use it, but if it's deteriorating, I'm not sure where they sell it No3Joint)
If you work on it yourself, there are many small parts, so when you install or remove it, the Bolt or parts fall off as it is easy to lose the parts in the event of an accident, you can quickly find the parts that have fallen by spreading a newspaper or the like on hand I think it's a good idea to do the work afterView Detail
Originally I thought of OEM, but I found it by chance.
The original key can be used and the operation is also a very good item with Smooth. ? ? ? But it was awesome if the price was a bit cheaper.View Detail
THE LARGEST
SHOP IN JAPAN
EXCLUSIVE COUPONS,
SALE, DEALS
FAST, RELIABLE
SHIPPING