It is like a Pliers pulling out a tooth, because it is plugged into a narrow space between the Caliper, it is never easy to put in force. When pulling out Piston, I think that it is basically the one you use at the end after extruding Piston up to Limit by using Brake lever beforehand. (If Piston is more than one,. Extrude). Although it is a delicate appearance, it also worked properly with Piston which became dirty and difficult to move. However, since the thickness is not so much, it tends to hurt the hand when holding the part of the handfully strongly. Of course it was useful for rubbing soup, of course, if Piston is up to four Caliper, I feel like I can roll a Towel around Pliers's teeth. (There was also a movie actually doing)
Quality feels good, not flimsy at all. This will make removing stuck pistons much easier. The grip could be a little thicker but it's no problem. The gripping part is metal with a knurled surface (not rubber) so should grip on the piston quite well. It fits my TZR250 caliper pistons which are quite small, to give you an idea of the size. View Detail
Regularly clean and lubricate the Caliper piston and rub out a good BrakeTouch and it's a more frequent task than an Oil change I do this roughly once every 2,000k miles, but if I feel the Touch on the Brake is bad, I'll do it We do it regardless of the distance
This is my first time using this product
It was a bit slender in construction, but considering the price, I think it's reasonable
If you grip it tightly and grab the Piston, it will work as expected, so you can take it as an individual I think it's good enough for maintenance work
I'm going to use the Piston along with the push back tool, so if you're going to do it, get both this and the push back tool You need
The actual work is to get the Piston out, clean it, turn it, push it back, lubricate it, and repeat When you pull the brake lever (when you step on the brake pedal), the Piston is released We'll do it until they come out together
If the Piston is rusted, replace it or polish it and reuse it
If the Rubber Seal is deteriorating, the Piston will not return well Replace the rubber seal as well
The ability to perform subtle BrakeControl by the degree of crushing of the finger that pulls the brake lever It increases the fun you have while running your motorcycle
View Detail
Cleaned BrakeCaliper and used to rub out the Piston
It helped me to grill the poorly moving Piston
The texture is a bit cheap, but with Net sales, you don't know until the actual product arrives, so there's no choice
Each manufacturer has a similar product on the market and probably does as wellView Detail
I bought it to clean Brake Caliper.
But it is not used frequently. But without Piston's Reverse side being washable.
Just pinch Piston from behind and use it.
Easy to use.
I can do a little Wound inside Piston, but I do not care much.View Detail
Since Piston is fixed with GizaGiza, Wound is attached, but it can work efficiently.
Screw for fixing is not reliable, but there is no problem using it.
If possible, do not use this, either Lever or Compressor, so I'd like to get Piston.View Detail
THE LARGEST
SHOP IN JAPAN
EXCLUSIVE COUPONS,
SALE, DEALS
FAST, RELIABLE
SHIPPING