26.44 USD
(4,000 JPY)
23.5 USD
(3,554 JPY)
(11% OFF)
3 (4 Reviews)
Average
Tachometer is not stable. GPX125GORILLAI bought it to stabilize the needle display of Tachometer.
Acewell 6000 and Watani SP2 combination seems to be stable at 180 kΩ on the primary side, but my is GCraftMNK 019 Buffing multiplied Spec. For normal, Carbon 1 / 4 If it is a connection that inserts a resistor, the effect of Noise or the symptom that Tachometer's needle indication is 500 rpm gap with Digital display.
However, there is no effect of Pulse Generator.
You have to fundamentally raise Noise and it is useless.
So, I removed the Pulse Generator.
1 on the primary side / 4 Carbon Resistance 380 kΩ, CDIHarness at LightCore, Large body stabilized.
In Pulse Generator we used only LightCore (Lol)
Because the Pulse Generator itself worked normally, I think Universality is high.
However, if it is mounting according to the handling Instruction Manual why, Engine response is not good.
For your information, the ignition system
TakegawaStreet outerRotor, Takegawa CDI, Wotani SP2, KIJIMAPlug cord, NGKPlug capR.
Reviews For DAYTONA Pulse Generator From Other Webike User
Very Good
For use with Universal Chinese MeterI bought it and tried it because there was not even the sign that the tachometer worked at all though I attached a Chinese Digital meter.
I did the wiring as described in the manual, and it worked fine with the settings for 2nd.
It seems that even the Digital type thing of UniversalMeter works or does not work according to Spec.
I was lucky to be able to use it against my expectations, although it is natural that it does not work because it is not the original usage.View Detail
Very Good
Use with Tachometer from DAYTONAI bought it at the same time as the Tachometer made by DAYTONA The TachometerSingle Body had a bad Response or a needle that went out of control I was worried because I had heard that the speed was not stable, so I installed this at the same time from the beginning It responds to the throttle without any discomfort, just like the OEM Tachometer Wiring is long, so it takes up a lot of storage space (It doesn't matter if you put it inside the Cowl.)View Detail
Poor
You choose Meter.Universality may be low?
acewell 6000 Watani Coil was useless. That is, it is rather troublesome to say.
If you do not want to destroy Meter Wotani is a yam and Pulse Generator's set is good for ordinary Coil. By the way, acewell 6000 has broken. I was able to exchange it within the warranty period.View Detail
Most Viewed Reviews Of DAYTONA Other Speedometer Options / Repair Parts
Excellent
Zoomer 50cc speedo conversion Product is great and function well..easy to install because of well illustrated guidlelines prior installation..perfectly fit to daytona velona digital guageView Detail
Average
感覺不好Because I bought the electronic meter of this brand, but the cable for measuring the speed is missing after installation, I need to buy the electric speedometer adapter of this brand to use it together, and the adapter product is expensive. So I don’t feel too good.View Detail
Excellent
Speedo sensorThe Daytona non contact speed sensor works perfectly with my Dayton Velona Gauges. They are easy to set up and also easy to wire in. They are also much more clean looking on the bike compared to other sensors I have used. I now have these on 3 different bikes.View Detail
Very Good
For use with Universal Chinese MeterI bought it and tried it because there was not even the sign that the tachometer worked at all though I attached a Chinese Digital meter.
I did the wiring as described in the manual, and it worked fine with the settings for 2nd.
It seems that even the Digital type thing of UniversalMeter works or does not work according to Spec.
I was lucky to be able to use it against my expectations, although it is natural that it does not work because it is not the original usage.View Detail
Very Good
Use with Tachometer from DAYTONAI bought it at the same time as the Tachometer made by DAYTONA The TachometerSingle Body had a bad Response or a needle that went out of control I was worried because I had heard that the speed was not stable, so I installed this at the same time from the beginning It responds to the throttle without any discomfort, just like the OEM Tachometer Wiring is long, so it takes up a lot of storage space (It doesn't matter if you put it inside the Cowl.)View Detail
Other Reviews From Japan User(translated)
Excellent
Radipon handled in Mild?attachment
The CBR650R is mounted at the same position angle as the NORMAL.
However, when the handlebar was cut to the Left lock, it interfered with the interior cover next to the Meter, so the interior cover was cut away.
I also purchased a 45° angled banjo adapter for the mesh hose to accommodate the tension of the mesh hose.
・NORMAL (Reserve integrated horizontal master) Impressions of
No complaints on public roads. Familiar feel and very easy to handle.
However, when the brake is set to "hard brake," the rate of increase in braking force relative to the input seems to decrease, and the brake becomes more forceful.
Radipon (Reserve separate body portrait master) Impressions of
It was totally different from what I expected, my expectation was that it would feel like a Rear brake…
It is really a mild and easy-to-handle radipon.
On public roads, it feels like NORMAL! I wonder if it's because NORMAL is the same NISSIN?
But I felt the radipon effect from Breaking a little stronger, and
It can be hung up to a hard brake without effort.
I felt trust that this could stop.View Detail
Very Good
packtalk bold Attached MountI purchased this for use with multiple Helmets. 。
Mount included with the BOLD.
Microphone and speaker are not included and must be purchased separately.View Detail
Excellent
Grip replacementGrip that had been used for a long time was worn out and had to be replaced.
They are soft and dampen vibration.View Detail
Very Good
Works well in everyday life[How is it used?
Used to lick Screw loose.
Was the one you received as per Image?
As per Image.
How was your experience with it?
When used on a strongly tightened Screw, it can be safely and securely removed.
The licked Screw was removed.
It is also useful for DIY Screw removal.
[Points to note]
When used on a licked Screw, it is best to beat it in with a Hammer before use.View Detail
THE LARGEST
SHOP IN JAPAN
EXCLUSIVE COUPONS,
SALE, DEALS
FAST, RELIABLE
SHIPPING