I attached it to the 2016 model CYGNUS X that was in the corresponding model but the diameter of Throttle is too small and Axel 1 / About 4 will play. Once, I adjusted the play of Accelerator Wire but it is out of adjustment range.
* The BEST and MUST store to find Japanese parts.
* Register now for amazing deals and other special offers!
* Over 800,000 listed items. It's hard NOT to find your parts.
Congratulations! Your new account has been successfully created! You can now take advantage of member privileges to enhance your online
shopping experience with us. If you have ANY questions about the
operation of this online shop, please email Webike through CONTACT US.
A confirmation has been sent to the provided email address. If you
have not received it within the hour, please contact us.
I attached it to the 2016 model CYGNUS X that was in the corresponding model but the diameter of Throttle is too small and Axel 1 / About 4 will play. Once, I adjusted the play of Accelerator Wire but it is out of adjustment range.
Fits: HONDA CB250R 18-21, HONDA CB250R 18-21 ABS MC52, HONDA CRF250RALLY 21, SUZUKI GSX1300 HAYABUSA 22, HONDA CB125R 18
NG4BG old gixxer (up to 2017) doesn't fit Thailandco just needs a Cable adjustment.View Detail
Fits: HONDA CB250R 18-21, HONDA CB250R 18-21 ABS MC52, HONDA CRF250RALLY 21, SUZUKI GSX1300 HAYABUSA 22, HONDA CB125R 18
I want to replace Handlebar Grip, but I want to keep NORMAL and purchased the commodity concerned. In addition, unless also Handlebar is removed, because Throttle sleeve does not enter, it is a little troublesome.View Detail
Fits: YAMAHA , YAMAHA tricity 15, YAMAHA Majesty S 16 S VIN number: SG28J-
It's cheaper than OEM Products and you get points
I thought about using KIJIMA, but I decided to use this product because it is cheaper and has more pointsView Detail
Fits: HONDA CB250R 18-21, HONDA CB250R 18-21 ABS MC52, HONDA CRF250RALLY 21, SUZUKI GSX1300 HAYABUSA 22, HONDA CB125R 18
I didn't want to modify the OEM throttle to replace the Grip, so I bought it It was
Compared to NORMAL, the Throttle opens up a little better
They were the same length and diameter and easy to replaceView Detail
Fits: HONDA CB250R 18-21, HONDA CB250R 18-21 ABS MC52, HONDA CRF250RALLY 21, SUZUKI GSX1300 HAYABUSA 22, HONDA CB125R 18
We changed the Grip from OEM to Other Brand Product, but SEA BASS cars are Because there is a groove in the throttle, you can feel decoration depression in the groove even if you wear it as it is Since Grip is also changed in the occasion of the Handlebar exchange, the Replaced by Throttle Because there is no groove, Gel grip is close to it Also, I cut it at the time of installation, but the tool used for cutting Handlebar is a little bilious I was able to cut it off with no problem
Some reviewers say it's looser than the OEM, but I don't particularly care for it, and the Axel twists, reverts Both are Smooth
Other than SEA BASS vehicles, you may want to buy the OEM if you have the potential to reuse it MmView Detail
Purchased for regular replacement.
If it were a little cheaper, I could get a stable replacement...View Detail
?attachment
The CBR650R is mounted at the same position angle as the NORMAL.
However, when the handlebar was cut to the Left lock, it interfered with the interior cover next to the Meter, so the interior cover was cut away.
I also purchased a 45° angled banjo adapter for the mesh hose to accommodate the tension of the mesh hose.
・NORMAL (Reserve integrated horizontal master) Impressions of
No complaints on public roads. Familiar feel and very easy to handle.
However, when the brake is set to "hard brake," the rate of increase in braking force relative to the input seems to decrease, and the brake becomes more forceful.
Radipon (Reserve separate body portrait master) Impressions of
It was totally different from what I expected, my expectation was that it would feel like a Rear brake…
It is really a mild and easy-to-handle radipon.
On public roads, it feels like NORMAL! I wonder if it's because NORMAL is the same NISSIN?
But I felt the radipon effect from Breaking a little stronger, and
It can be hung up to a hard brake without effort.
I felt trust that this could stop.View Detail
I purchased this for use with multiple Helmets. 。
Mount included with the BOLD.
Microphone and speaker are not included and must be purchased separately.View Detail
Grip that had been used for a long time was worn out and had to be replaced.
They are soft and dampen vibration.View Detail
[How is it used?
Used to lick Screw loose.
Was the one you received as per Image?
As per Image.
How was your experience with it?
When used on a strongly tightened Screw, it can be safely and securely removed.
The licked Screw was removed.
It is also useful for DIY Screw removal.
[Points to note]
When used on a licked Screw, it is best to beat it in with a Hammer before use.View Detail
To continue viewing this product on Japan domestic webike (in Japanese), press "Go to Japan Domestic".
Customer Service
INFORMATION
THE LARGEST
SHOP IN JAPAN
EXCLUSIVE COUPONS,
SALE, DEALS
FAST, RELIABLE
SHIPPING