One of the drawbacks of the old car like FJ 1200 is the darkness of Headlight, but I thought that it was impossible to make LED, but I found this product and purchased it.
Regarding the installation, special processing was unnecessary and there was no problem.
Although it is the brightness of the bottom, it felt that it became slightly brighter than Halogen by the Low beam.
At High beam, the brightness was insufficient and the vehicle inspection did not pass. By the way, there are only 6,900 cd against the standard of 12,000 cd or more, and at the stage where the inspector first visually checked "You can not do with this," It was like it was said.
Regarding the light distribution, I could only confirm it in a short period of night driving and I think that there is compatibility with the car, so it can not be said that it is good or bad, but in the Low beam, the distribution of Up is more than Halogen It was done.
Because I did not pass the vehicle inspection, when exchanged for Halogen bulb on the spot, the cylinder Glass that covers the LED element has broken. I did not add shocks or excessive force, and it took a total of 7 days in a day trip, and it took up in less than 100 hours in working time.
It was a disappointing item in terms of product longevity and lack of brightness of High beam although the make-up of appearance was beautiful and the quality seemed to be good.
It did not attach as it was.
OEM Closing Gold and Waterproof Cover did not attach. Processing is required.
I approached another Motorcycle shop in the neighborhood and got it unprocessed when I got another Motorcycle part.
It is said that the shape is different even in the same Manufacturer.View Detail
Sale item mounted on KDX 250 SR. I have not traveled yet, but Halogen 30 / 30w (PH7) Because it is an exchange from, the brightness is the difference of muddy.
Since H4Type was attached to PH7, Coupler obviously has no compatibility, it is connected with Bullet Terminal after cutting off Wiring.
Lamp cut and mounted the parts of for H7 to Pfor H7, but since the nail broke one place, roll the tape and fix it. There is no problem for the time being, but if you avoid Risk, please select the one that fits the model even if it is a little expensive.View Detail
Headlight wore on SEROW which was dark at H4 Bulb and only rained in the day, but it got very bright and it got in a state where it can ride with confidence at night as well. Since it is too bright, I attached a Film to drop the attached light intensity. I also own Motorcycle, so I'm going to replace them sequentially. It is recommended.View Detail
Because of the old Motorcycle, I was not looking for BlueWhite light at the moment, but looking for a color close to the bulb color. It seems that 4300K ??can be set and purchased for reasonable price.
At the moment when the product arrived and saw Valve, I thought that High beam was useless. LED on one side (Upper surface) Although it is not attached, Big Rie! It's cheap.
Film for changing colors can not be separated and struggled and somehow pasted. Installation on the car body is non-machining and there is nothing wrong. After all the high beam was useless. The vehicle inspection is probably not good. The color is too yellow to be considered 4300 K (Fog Lamp place of a little old car) I do not ride myself only during the day, so I wonder if this is OK.View Detail
I am on Ural Sidecar made by Russia of MODEL 2015. Although I was not interested in HID and LED, I just bought it immediately after watching this item of Cheeky Che Chea Cheap. Instruction Manual is a foreign language, but without any problems, installation is completed in 5 minutes. However, Rubber's Waterproof Cover could not be installed as it was, and processing was necessary. I will return it to the original at the time of inspection, but it is bright to use it. High beam does not illuminate so far, but Universal will have no choice but to convince at this price.View Detail
THE LARGEST
SHOP IN JAPAN
EXCLUSIVE COUPONS,
SALE, DEALS
FAST, RELIABLE
SHIPPING