12.92~ USD
(1,955 JPY)
4.9 (7 Reviews)
Excellent
High precisionFor brembo new Crab 34, NORMAL's BreederValve is head 11 mm or 7 / 16in. The size of nice Size, in addition, because it is brittle and heavy made of iron, it is lightweight about 5 Gram per piece, but I think that the real value of this item is the hardness, high rigidity due to Material, plus the processing precision , The feeling of being tightened after bleeding and the feeling of security are not compare with NORMAL's Breeder, as long as the head is 10 mm.
Reviews For ZETA Titanium Breeder Screw From Other Webike User
Excellent
Upgrade that old rusty bleeder screwWhen looking at my motorcycle to see what was required to upgrade my front brake lines. Noticed the old front brake caliper bleeder screw was rusty and leaking. So added one of these to the order to swap it out while the brakes were apart. Much nicer fit and finish then the old OEM steel one and do not have to worry about it rusting again. Pricey but to be expected for this material. Straight forward installation just remember not to over torque it at the completion of your maintenance.View Detail
Very Good
Titanium is expensive, but it's good stuff.The bolt on my GALE SPEED Brake master was rusted out and I wanted to buy something rust resistant.
It arrives without any particular problem. It is natural.
This is a RECOMMENDATION product especially for those who use Gail.
It's Titanium, so it's a bit expensive.View Detail
Excellent
Self-satisfiedI bought it because Nisshin's Rajpon and Screw Pitch are the same
But when I rubber cap it, I can't see it at all!
It was just an expensive but self-satisfying Custom, who knows?View Detail
Excellent
Apply bremboMaterial until Breeder this time : I did not plan to turn it into a Titanium product but another Titanium Bolt from Jita ... Nut I saw it in the eyes and hurriedly purchased
I was glad I could buy it from the conclusion
Well, thanks to this Breeder, I also exchanged the Brake line comprehensively My self satisfaction is 5 starsView Detail
Most Viewed Reviews Of ZETA Brake Bleeder / Air Bleeder
Excellent
Upgrade that old rusty bleeder screwWhen looking at my motorcycle to see what was required to upgrade my front brake lines. Noticed the old front brake caliper bleeder screw was rusty and leaking. So added one of these to the order to swap it out while the brakes were apart. Much nicer fit and finish then the old OEM steel one and do not have to worry about it rusting again. Pricey but to be expected for this material. Straight forward installation just remember not to over torque it at the completion of your maintenance.View Detail
Very Good
Titanium is expensive, but it's good stuff.The bolt on my GALE SPEED Brake master was rusted out and I wanted to buy something rust resistant.
It arrives without any particular problem. It is natural.
This is a RECOMMENDATION product especially for those who use Gail.
It's Titanium, so it's a bit expensive.View Detail
Excellent
Self-satisfiedI bought it because Nisshin's Rajpon and Screw Pitch are the same
But when I rubber cap it, I can't see it at all!
It was just an expensive but self-satisfying Custom, who knows?View Detail
Excellent
Apply bremboMaterial until Breeder this time : I did not plan to turn it into a Titanium product but another Titanium Bolt from Jita ... Nut I saw it in the eyes and hurriedly purchased
I was glad I could buy it from the conclusion
Well, thanks to this Breeder, I also exchanged the Brake line comprehensively My self satisfaction is 5 starsView Detail
Other Reviews From Japan User(translated)
Excellent
Radipon handled in Mild?attachment
The CBR650R is mounted at the same position angle as the NORMAL.
However, when the handlebar was cut to the Left lock, it interfered with the interior cover next to the Meter, so the interior cover was cut away.
I also purchased a 45° angled banjo adapter for the mesh hose to accommodate the tension of the mesh hose.
・NORMAL (Reserve integrated horizontal master) Impressions of
No complaints on public roads. Familiar feel and very easy to handle.
However, when the brake is set to "hard brake," the rate of increase in braking force relative to the input seems to decrease, and the brake becomes more forceful.
Radipon (Reserve separate body portrait master) Impressions of
It was totally different from what I expected, my expectation was that it would feel like a Rear brake…
It is really a mild and easy-to-handle radipon.
On public roads, it feels like NORMAL! I wonder if it's because NORMAL is the same NISSIN?
But I felt the radipon effect from Breaking a little stronger, and
It can be hung up to a hard brake without effort.
I felt trust that this could stop.View Detail
Very Good
packtalk bold Attached MountI purchased this for use with multiple Helmets. 。
Mount included with the BOLD.
Microphone and speaker are not included and must be purchased separately.View Detail
Excellent
Grip replacementGrip that had been used for a long time was worn out and had to be replaced.
They are soft and dampen vibration.View Detail
Very Good
Works well in everyday life[How is it used?
Used to lick Screw loose.
Was the one you received as per Image?
As per Image.
How was your experience with it?
When used on a strongly tightened Screw, it can be safely and securely removed.
The licked Screw was removed.
It is also useful for DIY Screw removal.
[Points to note]
When used on a licked Screw, it is best to beat it in with a Hammer before use.View Detail
THE LARGEST
SHOP IN JAPAN
EXCLUSIVE COUPONS,
SALE, DEALS
FAST, RELIABLE
SHIPPING