26.61 USD
(4,025 JPY)
24.3~ USD
(3,675 JPY)
(9% OFF)
5 (1 Reviews)
rating breakdown
5 Stars |
|
1 |
4 Stars |
|
0 |
3 Stars |
|
0 |
2 Stars |
|
0 |
1 Stars |
|
0 |
Excellent
Satisfied with the performance as per standardPurchase for measures of OEMHeadlight that can not pass the optical axis inspection of the vehicle inspection easily.
OEM's Lens standard is 5. Right is the main traveling Beam at Bates type of 5 inch (High beam) For HR-50R and Left for passing (Low beam) HC-50R and Lens cut differ for. It was difficult to pass the optical axis test in this state, and I was using One Side Low beam, One Side High beam in another re-imported car.
5 of POSH. 5 inch Repair lens is H4 Coupler and High beam / HC corresponding to Low beam / It became Lens cut of R-50R, and it was able to pass the optical axis test with a slight adjustment about the optical axis.
By attaching LightRelay, it became to illuminate the sufficient irradiation range regarding light intensity.
Most Viewed Reviews Of POSH Headlight Lens
Average
Attention to conformance ValveRegarding the evaluation, if you can use it - - - Please do not refer to it as it is assumed.
Using H4 Bulb 4. I bought it as a maintenance part of 5-inches Bates Headlight,
Conformance Valve is "PH7Valve, 35 / It is 35 W ".
Lens part and Reflector part are fixed with SiliconPate.
Because I can not install H4 Bulb, I finally returned it.
Just to be sure, I attach the image of Valve installation part of product.View Detail
Other Reviews From Japan User(translated)
Excellent
Radipon handled in Mild?attachment
The CBR650R is mounted at the same position angle as the NORMAL.
However, when the handlebar was cut to the Left lock, it interfered with the interior cover next to the Meter, so the interior cover was cut away.
I also purchased a 45° angled banjo adapter for the mesh hose to accommodate the tension of the mesh hose.
・NORMAL (Reserve integrated horizontal master) Impressions of
No complaints on public roads. Familiar feel and very easy to handle.
However, when the brake is set to "hard brake," the rate of increase in braking force relative to the input seems to decrease, and the brake becomes more forceful.
Radipon (Reserve separate body portrait master) Impressions of
It was totally different from what I expected, my expectation was that it would feel like a Rear brake…
It is really a mild and easy-to-handle radipon.
On public roads, it feels like NORMAL! I wonder if it's because NORMAL is the same NISSIN?
But I felt the radipon effect from Breaking a little stronger, and
It can be hung up to a hard brake without effort.
I felt trust that this could stop.View Detail
Very Good
packtalk bold Attached MountI purchased this for use with multiple Helmets. 。
Mount included with the BOLD.
Microphone and speaker are not included and must be purchased separately.View Detail
Excellent
Grip replacementGrip that had been used for a long time was worn out and had to be replaced.
They are soft and dampen vibration.View Detail
Very Good
Works well in everyday life[How is it used?
Used to lick Screw loose.
Was the one you received as per Image?
As per Image.
How was your experience with it?
When used on a strongly tightened Screw, it can be safely and securely removed.
The licked Screw was removed.
It is also useful for DIY Screw removal.
[Points to note]
When used on a licked Screw, it is best to beat it in with a Hammer before use.View Detail
THE LARGEST
SHOP IN JAPAN
EXCLUSIVE COUPONS,
SALE, DEALS
FAST, RELIABLE
SHIPPING