Bolt The hole does not fit, it is the worst.. Usually Quantity : I only have 1 pc in a place I have to stop with 2 pc.
It is like throwing 3 million yen.
* The BEST and MUST store to find Japanese parts.
* Register now for amazing deals and other special offers!
* Over 800,000 listed items. It's hard NOT to find your parts.
Congratulations! Your new account has been successfully created! You can now take advantage of member privileges to enhance your online
shopping experience with us. If you have ANY questions about the
operation of this online shop, please email Webike through CONTACT US.
A confirmation has been sent to the provided email address. If you
have not received it within the hour, please contact us.
Fits: YAMAHA YZF-R25 , YAMAHA MT-25 (2BK-RG43J), YAMAHA MT-25 (JBK-RG10J), YAMAHA YZF-R3 , YAMAHA MT03 View more
Bolt The hole does not fit, it is the worst.. Usually Quantity : I only have 1 pc in a place I have to stop with 2 pc.
It is like throwing 3 million yen.
Fits: SUZUKI GSX250R 17-21
之前购买过忠男的前段 被他的结构和做工吸引了 不像那些竞技取向的排气 为了性能而损失低扭以及噪音的控制器 对于日常骑行玩乐实在是不实用 所以我将吉村阿尔法全段更换为了忠男 这次尾段到货也没让我指望 期待装车----------------------------------------------------------The previous section of the bought before, was attracted by his structure and work. It is not like those competitive exhausts for performance and the losses, and the noise controller is not practical for daily cycling. So I will replace Ji Village alpha. In order to loyal male, I didn't let me expect to load.View Detail
Fits: KAWASAKI ZX-6R 19-21 2BL-ZX636G
I really like this exhaust, it's small and light weight but isn't obnoxiously loud like some other exhausts. It's very well made and the welds are perfect. Top quality as you would expect from an exhaust made in Japan. I think it looks great as well! Really suits the 636.View Detail
Fits: YAMAHA YZF-R25 , YAMAHA MT-25 (2BK-RG43J), YAMAHA MT-25 (JBK-RG10J), YAMAHA YZF-R3 , YAMAHA MT03
This Slip-on has excellent quality and appearance.It was a very easy 15-20 minute job to install it and saved almost 7 lbs with removing the stock muffler and passenger foot peg mounts & pegs.It has a very nice sound with a deeper tone and a slight growl as compared to the stock muffler.View Detail
Fits: SUZUKI DL1000 V-STROM V-Strom250 2BK-DS11A
I used to have a yoshimura silencer in my PowerBox, but it was much better than the normal silencer.
As the Torque died from the start, it was obvious that the exhaust was being drained too much, making it difficult to ride.
I sold my Yoshimura on Yahoo and bought this Silencer, but the power came out from the start.
The acceleration was clearly better.
If you have installed a PowerBox, you should definitely install this Silencer.
The Silencer from another company is a waste of money and I think it will lose power compared to the NORMAL.
The downside is that the exhaust sound would be great if it sounded like Yoshimura, but the NORMAL exhaust sound is a little dry and light.
I think people who are particular about sound will be a little disappointed with the change.View Detail
Fits: YAMAHA XG250 TRICKER (JBK-DG16J), YAMAHA SEROW250 18-21 (2BK-DG31J), YAMAHA XT250X JBK-DG17J, YAMAHA SEROW250 -21 (JBK-DG16J-2BK-DG31J)
[How is it used?
I bought this to change the silencer on my serow 250.
I had already replaced the exhaust pipe with SP Tadao's one, and the exhaust pipe alone was effective.
I also decided to change the Silencer because I felt it was clogged in the high RPM range.
I thought about other Manufacturer, but I decided to use the same Tadao.
Was the one you received as per Image?
This time I chose Stainless and it was beautifully made and well packaged.
The shape of the silencer is also different from other manufacturers.
Once installed, you will not feel any discomfort.
Was the installation difficult?
The instructions included with the product are very detailed and easy to replace. The installation screw holes are perfect.
You can see that it's properly made.
How was your experience with it?
The engine has no stress from bottom to top.
It was a fun Engine.
I feel that the accelerator operation at low speed has become severe because the response has become better.
[Included Parts:were they on?
Instruction ManualSticker comes with Included Parts:.
[Was there anything that disappointed you?
Not particularly
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
Exhaust leak from the joint with Exhaust pipe.
Liquid Gas has been applied.View Detail
Purchased for regular replacement.
If it were a little cheaper, I could get a stable replacement...View Detail
?attachment
The CBR650R is mounted at the same position angle as the NORMAL.
However, when the handlebar was cut to the Left lock, it interfered with the interior cover next to the Meter, so the interior cover was cut away.
I also purchased a 45° angled banjo adapter for the mesh hose to accommodate the tension of the mesh hose.
・NORMAL (Reserve integrated horizontal master) Impressions of
No complaints on public roads. Familiar feel and very easy to handle.
However, when the brake is set to "hard brake," the rate of increase in braking force relative to the input seems to decrease, and the brake becomes more forceful.
Radipon (Reserve separate body portrait master) Impressions of
It was totally different from what I expected, my expectation was that it would feel like a Rear brake…
It is really a mild and easy-to-handle radipon.
On public roads, it feels like NORMAL! I wonder if it's because NORMAL is the same NISSIN?
But I felt the radipon effect from Breaking a little stronger, and
It can be hung up to a hard brake without effort.
I felt trust that this could stop.View Detail
I purchased this for use with multiple Helmets. 。
Mount included with the BOLD.
Microphone and speaker are not included and must be purchased separately.View Detail
Grip that had been used for a long time was worn out and had to be replaced.
They are soft and dampen vibration.View Detail
[How is it used?
Used to lick Screw loose.
Was the one you received as per Image?
As per Image.
How was your experience with it?
When used on a strongly tightened Screw, it can be safely and securely removed.
The licked Screw was removed.
It is also useful for DIY Screw removal.
[Points to note]
When used on a licked Screw, it is best to beat it in with a Hammer before use.View Detail
To continue viewing this product on Japan domestic webike (in Japanese), press "Go to Japan Domestic".
Customer Service
INFORMATION
THE LARGEST
SHOP IN JAPAN
EXCLUSIVE COUPONS,
SALE, DEALS
FAST, RELIABLE
SHIPPING