112.47 USD
(17,020 JPY)
3 (4 Reviews)
Fits:
YAMAHA MT-07 [RM07J] 14-21 H26.4-, YAMAHA MT-09 [RN34J] 14-21 H26.4-, HONDA CB400SF [NC42] 07-21 H19.12-, HONDA CB1100 [SC65] 12-21 H24.2-, HONDA CB1300SF [SC54] 03-21 H15.12-
View more
Excellent
I love the white light!The head lamp of MT-09 is Halogen, but because it is a little dark, it replaced it with LED It was
It was possible to install Valve easily, but I had to turn the space where Controller is installed I had a hard time finding it
The white light is good for parenthesis after installation
I drove through the Tunnel right away and it's brighter and better than the OEM...
Japanese Vehicle Inspection Correspondence is also good
If the price is a little lower, even better
Most Viewed Reviews Of PIAA LED Headlight Bulb
Excellent
No problem.GSX-R1000 I put it on my K8.
This kit does not match with the Coupler on the car body, so you just need to replace it.
If you want to install it on this motorcycle, you need to remove it from the SIDE and front cowl, otherwise the back of the Valve will be caught and you will not be able to install it.
The Controller feels quite large. Brightness is no problem.View Detail
Excellent
Safe and stable PIAA LED Headlight for motorcycles.After 5 years of use, the low side of the LED headlight stopped working, so I decided to buy a new headlight.
I chose the "PIAA PIAA MLE6 6000Kelvin 12V−24/24W" from a number of potential LED headlights. I was a little worried because there was no room in the headlightReverse side of GSX-S1000. The wiring is long, but if you wrap it around, it will fit beautifully. The instructions are very detailed and easy to read, and I can work with ease. The brightness is needless to say. Other companies show Lumen&Kelvin, but PIAA also shows Candela, which I liked. I chose this one from the sense of security of the car inspection, durability, and others though there is a cheap thing if "explosion light" is desired.View Detail
Very Good
One word:cheerful.It is brighter than the NORMAL Headlight Bulb. Because I think that it is a place where I am glad to have corresponded to the vehicle inspection and the vibration countermeasure is done tightly because it is two-wheel for vehicle, I expect the long life.View Detail
Very Good
It's a manufactured product, the difference is large from the cheap ones I used to use. The light distribution and off-light range is very good.Installation is a simple matter of reading the instruction manual, it shouldn't be too difficult.
There was a fan on the back and it seemed to hit the fan lightly, so I used a Light caseRearHole saw to make a hole in it.
Wiring of the Controller felt long, but in fact, if it is a cowl car, it will be long, and if it is a non-cowl car, it will be short.
My RC42 has a depression under the rear end of the tank. There is a Large Kinky Coupler in the generator, but I managed to fit it.
Wiring of Controller is the feeling that there is a little room cutting Handlebar.
When I tried to ride at night after installing it, there was no problem, but when I rode on the next day, the Light went out when I set the High beam switch to Low. The Indicator is working.
So, when I checked, it connects Coupler of Light valve and Coupler of Controller, but even if it inserts firmly, the inserted part floats.
There may be the affinity with the coupler of the vehicle, but if the above-mentioned symptoms occur, please see the coupler. Or if you insert the Coupler in advance, please tie it up with Tie Wrap to prevent it from falling out.
At first, I had no idea what was going on, and I was worried about it.View Detail
Excellent
Pretty goodI installed it on my Ninja250SL and if you're looking for an LED Headlight Bulb is highly recommended
It's nice to see a reliable manufacturer's product, and that's the PIAA As the product claims, the luminous point is quite close to the OEM Halogen bulb, and the light diffusion The way it works is almost the same as OEM It is often said that LED Bulb cannot use high beam, but this Valve It is very similar to the OEM, even the way the high beam is illuminated They do However, if you turn it around and don't like the way the OEM illuminates it, you can't expect to replace it It also means that there will be none
The light is crisp and clear and it looks like an LED I used to use a cheap LED Bulb, but this one is not so bad was subtle But with this Valve, it shines brightly and is very cool There is enough light itself
The availability of the OEM WaterproofRubber is also a high point However, you may need to modify it depending on the model of car But I managed to get it without any processing I attached the pedestal to the rubber cover and put it on the back of the body, because the pedestal and the body are separated It is a form to fit the Body into the base There are two L-shaped slits in the inside of the pedestal, and the two projections of the Body are pushed in there and twisted to fix the Body It's not hard to see why, as the Construction Manual explains in detail I guess
It's also nice that the cooling is a fan, but it makes very little noise You won't hear it first
By the way, the Controller is also included, although it is not in the image Wiring is very long
In general, I can highly recommend Valve It has the performance to match the high priceView Detail
Other Reviews From Japan User(translated)
Excellent
Radipon handled in Mild?attachment
The CBR650R is mounted at the same position angle as the NORMAL.
However, when the handlebar was cut to the Left lock, it interfered with the interior cover next to the Meter, so the interior cover was cut away.
I also purchased a 45° angled banjo adapter for the mesh hose to accommodate the tension of the mesh hose.
・NORMAL (Reserve integrated horizontal master) Impressions of
No complaints on public roads. Familiar feel and very easy to handle.
However, when the brake is set to "hard brake," the rate of increase in braking force relative to the input seems to decrease, and the brake becomes more forceful.
Radipon (Reserve separate body portrait master) Impressions of
It was totally different from what I expected, my expectation was that it would feel like a Rear brake…
It is really a mild and easy-to-handle radipon.
On public roads, it feels like NORMAL! I wonder if it's because NORMAL is the same NISSIN?
But I felt the radipon effect from Breaking a little stronger, and
It can be hung up to a hard brake without effort.
I felt trust that this could stop.View Detail
Very Good
packtalk bold Attached MountI purchased this for use with multiple Helmets. 。
Mount included with the BOLD.
Microphone and speaker are not included and must be purchased separately.View Detail
Excellent
Grip replacementGrip that had been used for a long time was worn out and had to be replaced.
They are soft and dampen vibration.View Detail
Very Good
Works well in everyday life[How is it used?
Used to lick Screw loose.
Was the one you received as per Image?
As per Image.
How was your experience with it?
When used on a strongly tightened Screw, it can be safely and securely removed.
The licked Screw was removed.
It is also useful for DIY Screw removal.
[Points to note]
When used on a licked Screw, it is best to beat it in with a Hammer before use.View Detail
THE LARGEST
SHOP IN JAPAN
EXCLUSIVE COUPONS,
SALE, DEALS
FAST, RELIABLE
SHIPPING