?
What made you decide to buy?
I wanted something from Hand Bent, but I had an unreasonable ideal that I wanted to avoid the fancy burnings Because, CLRExhaust System was ideal Visual
How was your experience with it?
It has been a full exhaust system for kFACTORY until now, but
Since both the exhaust pipe and the end pipe have become thicker, the goodness of the exit is felt
Was it difficult to install? (In the case of hard parts)
It's not hard, you need Spring Remove or Socket wrenchetc But if you are used to it, you can do it in an hour, I think
What is the point or hang of installation (for hard parts)?
Temporarily install 4 exhaust pipes and insert the 4-1 assembly part, but at this time Attach the 4 exhaust pipes to the Right Side from the center of the body There is a protrusion on the oil pan that may be the Guard, and the protrusion is the Center of the assembly It was able to be installed without any contact with the exquisitely clearances
Enclosed
Material:4 Aluminum Flanges and 8 Stainless Steel Springs
OEMTandem Footpeg 2 Plates for repositioning
An Installation Instruction Manual was enclosed
If you don't want to use it because of the O2 sensor hole, you will need a separate Blind plug
[Was there anything that disappointed you?
Price, installation accuracy, visual, all are satisfactory
Do you have any wishes or improvements you would like to make for the Manufacturer?
Another User mentioned it in the imprint
There are vertical lines on my purchase that seem to be attached to the bending process I don't mind them, but I think they are better without them
[Do you have any products to compare it to?
New Type of OHNISHI HEAT MAGIC
Full Exhaust System with short end
Fits: KAWASAKI ZRX1100 , KAWASAKI ZRX1200 -09, KAWASAKI ZRX1200 DAEG
This K-Factory exhaust was an outstanding addition to My Kawasaki ZRX. It\'s looks, fit and finish were perfect with incredible quality. The performance was also very good and helped to boost the top end pull of the motor. I would highly recommend this exhaust to anyone with a 1224 motor or anyone seeking to tune their bike further and drop some serious weight! Thanks K-FactoryView Detail
Fits: KAWASAKI ZRX1100 , KAWASAKI ZRX1200 -09, KAWASAKI ZRX1200 DAEG
Thoroughly protected and well packed. Went together easily and went on my 2001 ZRX1224r with no issues. Raw titanium, indindustrial type finish. Build quality, fit&finish and welds all great. Flows huge, sounds amazing. I replaced a Muzzy Ti system with this. Muzzy was made from thinner walled, smaller diameter tubes and thus lighter. The K-Factory may be slightly heavier but it outflows the Muzzy by a ton. View Detail
Fits: KAWASAKI ZRX1100 , KAWASAKI ZRX1200 -09, KAWASAKI ZRX1200 DAEG
Beautiful exhaust, great fit and excellent quality ... definitely makes the ZRX look fantastic!Packaged arrived in New Zealand very quickly and extremely well packed with no damage.View Detail
Fits: KAWASAKI ZRX1100 , KAWASAKI ZRX1200 -09, KAWASAKI ZRX1200 DAEG
Fits: KAWASAKI ZRX1100 , KAWASAKI ZRX1200 -09, KAWASAKI ZRX1200 DAEG
I couldn't post a picture of it installed for some reason, so I'll post it here.View Detail
THE LARGEST
SHOP IN JAPAN
EXCLUSIVE COUPONS,
SALE, DEALS
FAST, RELIABLE
SHIPPING