?
What made you decide to buy?
I wanted a Hand Bent Full Exhaust System, but
I didn't want a fancy burn color
Because it was ideal Visual
How was your experience with it?
It's a good way to get out of the carburetor, and with a little tweaking of the carburetor, it will be even better
Was the installation difficult?
If you can remove the normal muffler, I think you can do it in one hour Small Clearance is pretty tight
It looks like the '99 doesn't fit, but I was able to install it with no problem
【Please tell me the installation point and hang】
Temporarily install the exhaust pipes numbered 1 through 4 first
The Flange nut is still at least hand-tightened
Next, we'll insert the assembly
There will be a grouping area on the Right Side from the Center
Install the assembly so that the lower side of the assembly is horizontal
When installed in the correct position, the projection of the oil pan comes to the center of the assembly part, so that it is an exquisite It is not hit by Clearance The end pipe is inserted and Silencer is added to the end of the pipe, and the clearance between the end pipe and the frame is changed to After securing the silencer, fix the silencer and tighten the flange nut to complete the process
Flange nut tightening torque is 2 kg
Degrease the exhaust pipe to prevent oil seizure
[Was there anything that disappointed you?
I wouldn't go so far as to say it's a disappointment
I wish the end pipe was a little more angled
(direction of the take-up)
[Accessories]
Aluminum FlangeQuantity:1 Set of 4pcs., 8 Exhaust Spring, Tandem FootpegUp Stay (Quantity):Pair (for Left and Right) (e.g. "I'll be back")
Instruction manual with photo
Do you have any wishes or improvements you would like to make for the Manufacturer?
Dare I say, bender scratches? I hope it doesn't have any marks like the lines attached vertically
I don't mind, but …
[Do you have any products to compare it to?
DT SilencerFull Exhaust of OHNISHI HEAT MAGIC system
[Others]
Fits: KAWASAKI ZRX1100 , KAWASAKI ZRX1200 -09, KAWASAKI ZRX1200 DAEG
This K-Factory exhaust was an outstanding addition to My Kawasaki ZRX. It\'s looks, fit and finish were perfect with incredible quality. The performance was also very good and helped to boost the top end pull of the motor. I would highly recommend this exhaust to anyone with a 1224 motor or anyone seeking to tune their bike further and drop some serious weight! Thanks K-FactoryView Detail
Fits: KAWASAKI ZRX1100 , KAWASAKI ZRX1200 -09, KAWASAKI ZRX1200 DAEG
Thoroughly protected and well packed. Went together easily and went on my 2001 ZRX1224r with no issues. Raw titanium, indindustrial type finish. Build quality, fit&finish and welds all great. Flows huge, sounds amazing. I replaced a Muzzy Ti system with this. Muzzy was made from thinner walled, smaller diameter tubes and thus lighter. The K-Factory may be slightly heavier but it outflows the Muzzy by a ton. View Detail
Fits: KAWASAKI ZRX1100 , KAWASAKI ZRX1200 -09, KAWASAKI ZRX1200 DAEG
Beautiful exhaust, great fit and excellent quality ... definitely makes the ZRX look fantastic!Packaged arrived in New Zealand very quickly and extremely well packed with no damage.View Detail
Fits: KAWASAKI ZRX1100 , KAWASAKI ZRX1200 -09, KAWASAKI ZRX1200 DAEG
Fits: KAWASAKI ZRX1100 , KAWASAKI ZRX1200 -09, KAWASAKI ZRX1200 DAEG
I couldn't post a picture of it installed for some reason, so I'll post it here.View Detail
THE LARGEST
SHOP IN JAPAN
EXCLUSIVE COUPONS,
SALE, DEALS
FAST, RELIABLE
SHIPPING