I use it as a Throttle tube on my Husaberg TE125 (2nd)
With OEM parts, it takes longer to get them in stock, so this is a big help
By the way, this product (ZE45-8120) is for 2nd
The photos are the same, but the shape is different for the 4th version, so you can't use it
Fits: SUZUKI , YAMAHA WR250X 07-17, YAMAHA WR250R 07-17, YAMAHA tricker 00-16, YAMAHA CELLOW 225 00-16
[How is it used?
When I knocked over the Motorcycle while playing in the woods, the OEMThrottle tube was pushed by the hand guard and chipped.
The operation itself was fine, but I decided to replace it because I didn't feel good about the chipping.
I could have gone with OEM, but I decided to go with this one anyway.
Was the one you received as per Image?
I think the thickness of the throttle tube is thinner than OEM, but I think it is stronger.
Is the Tube transversely Grip non-slip? There is a groove on the tube.
How was your experience with it?
No problem, no Grip bond. (I was prepared) 、
I have a Grip on it, but so far it is not gapped, so I am using it as is.
[Points to note]
This is an Axel part, so be careful when installing it.
How did it compare to other products?
This product is the same as the OEM Product, but it is more convenient because it is available at mass merchandisers.
Other items that would be helpful
Installation points and hang/Items to buy together/ Opinions and requests to the Manufacturer
nothing specialView Detail
Fits: SUZUKI , YAMAHA WR250X 07-17, YAMAHA WR250R 07-17, YAMAHA tricker 00-16, YAMAHA CELLOW 225 00-16
The Grip end was drilled with Unit's Grip End Cutter, but since the Throttle tube is 5mm shorter than the Pro taper PillowGrip, the Grip end and However, the throttle tube is about 5mm shorter than the Pro taper PillowGrip, so the Grip end and Handlebar interfere with each other and the Axel does not return properly.
In the end, I cut the interference part of the grip end with a thin cutter.
As a result, Axel's return felt good with Span.
I'm sure it's the same with other grips.View Detail
Fits: SUZUKI , YAMAHA WR250X 07-17, YAMAHA WR250R 07-17, YAMAHA tricker 00-16, YAMAHA CELLOW 225 00-16
To fit the KLX230R with the CloseType hand guard, the throttle tube was changed to match.
You can Cut the ends off, but it's not an expensive product, so I bought an Open end Throttle tube.
It's not a performance product, but it's convenient to be able to buy such a fine product easily.View Detail
Fits: SUZUKI , YAMAHA WR250X 07-17, YAMAHA WR250R 07-17, YAMAHA tricker 00-16, YAMAHA CELLOW 225 00-16
Buy ZE45-8101
The total length of the Throttle tube is only 120mm, and the standard 120mm Grip When you install it, there is 10-20mm of grip left over
When it comes to Grip less than 110mm in length and still for off-road, the choices are countless! I guess I'm supposed to cut and use Grip
You won't find a short description of it on DirtFreak's website, let alone on We-Big's product page
I contacted DirtFreak and they said this is the Spec
Without mentioning it, this would be a bad product
View Detail
Fits: SUZUKI , YAMAHA WR250X 07-17, YAMAHA WR250R 07-17, YAMAHA tricker 00-16, YAMAHA CELLOW 225 00-16
I installed it at the same time as Handlebar replacement for installation, but since the total length is shorter than OEM Product, if it is not tentatively assembled properly, it will be redoing work.
I thought that it was the same size as OEM Product, it was a disaster that I did not confirm the Length beforehand, and it became a chance to redraw the hole in Handlebar. Please be careful.View Detail
THE LARGEST
SHOP IN JAPAN
EXCLUSIVE COUPONS,
SALE, DEALS
FAST, RELIABLE
SHIPPING