Study how to remove the OEM exhaust system in advance by watching YouTube and other sources There is nothing difficult to do
This was my first time to install an exhaust system and I was able to afford it
However, when installing the exhaust system bracket, the 8mm BoltQuantity:The 2pc is not coming loose as hard as I thought it would and probably has some kind of screw lock agent in it It seems to be the cause, but anyway, if you're not careful, the Bolt is going to lick it. 6Point's It's better to loosen it up exactly with a tool
Now for my impressions of the exhaust system, it sounds good with the bass coming from the Idling! Although 1st and 2nd gears do not feel much change, 3rd and 4th gears are better My wife happened to buy the RSSports Exhaust from SP Takekawa and we compared the ride In my opinion, the one with good extension and less vibration on all GEAR is Takekawa The one with a nice thumping sound is Yoshimura I was impressed by the fact that the characteristics change quite a bit with Engine
Fits: HONDA MONKEY125 18-20 [Vehicle model]2BJ-JB02 [Engine model]JB02E
First I was very pleased with the product and the sound it produced. After 2.000 km the exhaust broke on the weld of the flange that goes into the cylinder head. I tried to claim a warranty with WeBike. I sent several photos which clearly showed that the exhaust broke on the weld. After consultation with Yoshimura, WeBike offered to ship the exhaust back to Japan for examination. They offered to pay for the shipment to Japan but stated that they wouldn't be liable for any costs regarding the return shipment, customs, taxes etc. With all these uncertainties I refused to send the product back to Japan. I asked them to reconsider and sent new photos to show them even more clearly that the breaking is on the weld. All WeBike offered was a 1.000 Yen coupon.Very disappointing customer service and Yoshimura product View Detail
Fits: HONDA MONKEY125 18-20 [Vehicle model]2BJ-JB02 [Engine model]JB02E
I've been riding with NORMAL for 2 years, but finally, I changed to YOSHIMURA which I've been longing for. I was able to replace the brackets and gaskets even as a beginner because I had seen the videos on YouTube. However, I had a hard time installing the bracket and replacing the gasket. It's a very nice parenthesis, but I think I hit it somewhere while I was working on it, and the paint came off a little bit. But I really like it, including the bass sound.View Detail
Fits: HONDA MONKEY125 18-20 [Vehicle model]2BJ-JB02 [Engine model]JB02E
I have been driving a carburetorMONKEY for about 20 years and of course the exhaust system is YOSHIMURA.
Banana Exhaust System (Type-3)
Recently designed, GPMagnum
Both are Titanium and light weight! And when you rev it up to high rpm, it makes a great sound!
I was really concerned about replacing the Exhaust System on my MONKEY125 because of that Image, but this machine bendedStraight cyclone looks so much better!
I like Titanium and Stainless Steel, but this Matte Black is just so erotic...
The silencer capacity is obviously small, and I thought it would not be too much because the aperture is effective, but still, when I listen to Youtube, I hear a good sound with bass effect, but everyone says that it is a bomb, a bomb, a bomb...
This is unsettling...
Still, I bought it at a bad price.
The results are, well, it's certainly quite a heavy bass around the idle and at low speeds, but at high rpm it's just a hair above normal, and honestly, it's one of the quietest.
It has a built-in catalytic converter and is not a full straight car, so it has a low sound, but it is low until high rpm, so it is not hard to drive around.
It looks great, sounds great, and as for the release, the start is more agile, and it blows beautifully up to high RPM, and I could feel the power increased slightly.
It was a perfect Exhaust System for me, so much so that I feel stupid for having bothered with it.
I got a really good deal.View Detail
Fits: HONDA MONKEY125 18-20 [Vehicle model]2BJ-JB02 [Engine model]JB02E
The design is simple, austere and great.
The sound is a little large, but not too loud.
I learned how to install it beforehand on the Net and
I was looking at the info on removing the footpeg.
I was able to install it without touching the footpeg.
I used a curved Glasses Wrench.
(8・10mm)View Detail
Fits: HONDA MONKEY125 18-20 [Vehicle model]2BJ-JB02 [Engine model]JB02E
Idling to low RPMs is nice and low.
However, it was unfortunate that the sound turned a little grating and cheesy in the higher RPM range.
It may be inevitable because it is a Short Tube Style and SmallEngine Displacement Volume car that emphasizes the appearance.
I think that the product which secures the Silencer part large is more carefully adjusted the sound.
I honestly want to go back to NORMAL when I go to Can Two because it's a volume that I'm very cautious about at Camping grounds.
It is easy to install as long as the footpeg is removed and the exhaust bracket is installed.View Detail
THE LARGEST
SHOP IN JAPAN
EXCLUSIVE COUPONS,
SALE, DEALS
FAST, RELIABLE
SHIPPING