My Off-road car is my old car, XL, which is an air cleaner, so I replaced it with this product I'm happy with it I do not feel a large change in performance, but I am satisfied because it is not bad (Lol)
* The BEST and MUST store to find Japanese parts.
* Register now for amazing deals and other special offers!
* Over 800,000 listed items. It's hard NOT to find your parts.
Congratulations! Your new account has been successfully created! You can now take advantage of member privileges to enhance your online
shopping experience with us. If you have ANY questions about the
operation of this online shop, please email Webike through CONTACT US.
A confirmation has been sent to the provided email address. If you
have not received it within the hour, please contact us.
Fits: HONDA , HONDA XR250 79-80, HONDA XR50 Motard 05-08, HONDA XR100 Motard 05-08, HONDA XR100R 85-87 View more
My Off-road car is my old car, XL, which is an air cleaner, so I replaced it with this product I'm happy with it I do not feel a large change in performance, but I am satisfied because it is not bad (Lol)
Fits: KAWASAKI KSR80 88-98, KAWASAKI KSR50 88-98, KAWASAKI KMX50 88-98, KAWASAKI KMX80 88-98
D TrackerOnSpec.fcr33 NORMALAir cleaner I used to use twin air, but the price is cheaper than twin air and the quality is the same. I feel that the Engine has become somewhat lighter.View Detail
Fits: YAMAHA YZ125 89-21, YAMAHA YZ250 89-21, YAMAHA YZ250F 13, YAMAHA YZ450F 09, YAMAHA YZ250X 15-22
If you go to Off-road motorcycle races frequently, Spare's Air Filter is a must. for YZ125/X, many people ride them and the Filter itself is very popular and sells out, so it is better to buy it as soon as it is in stock. I am sure it will be good for performance, but for a weekend race like myself, it is not worth it. (& Occasional regional championships) Rider is not sure.View Detail
Fits: KAWASAKI KDX220 SR 94-99, KAWASAKI KDX200 SR 89-93
[How is it used?
I was looking for a moderately priced air cleaner to restore and service my KDX220SR. I came across AirTec.
Was the one you received as per Image?
In my distant memory, there was a hole in the center for fixing the bolt. I think there was a hole in the center to hold the bolt in place, and it was protected by a round ABS plastic-like material...?
How was your experience with it?
It is shaped like the old solid wax Sponge, but the OEM Basket or Net can fit somehow, and you can fix it if you drill a hole in the center yourself... But I think it used to be a higher quality product...
[Points to note]
So, there is no hole in the center for fixing. After inserting the reverse side of the basket, you can use a fine +Driver to make a hole in it.
How did it compare to other products?
OEM Products and twin air products are cheaper than Label! However, it seems to have been reduced in cost.
I guess they are trying to keep the price increase to a minimum and cut down on excessive quality, because functionally, it works fine.
0Other items that may be useful include
Point and hang of installation
As mentioned above, the OEM product does not come with bolt holes, so you will need to install them yourself after purchase.
[ITEMS TO BUY TOGETHER
It looked like there was no filter oil applied, so maybe I should buy some filter oil?
Well, I used to use 2nd oil or engine oil instead...
[Opinions and requests to Manufacturer
There are no problems with the installation, so please keep the price low and line up for many years to come.View Detail
Fits: KAWASAKI KDX220 SR 94-99, KAWASAKI KDX200 SR 89-93
[How is it used?
I was looking for a moderately priced air cleaner to restore and service my KDX220SR. I was looking for a moderately priced air cleaner to restore and service my KDX220SR and came across AirTec.
Was the one you received as per Image?
In my distant memory, there was a hole in the center for fixing the bolt. I think there was a hole in the center to hold the bolt in place, and it was protected by a round ABS plastic-like material...?
How was your experience with it?
It is shaped like the old solid wax Sponge, but the OEM Basket or Net can fit somehow, and you can fix it if you drill a hole in the center yourself... But I think it used to be a higher quality product...
[Points to note]
So, there is no hole in the center for fixing. After inserting the reverse side of the basket, you can use a fine +Driver to make a hole in it.
How did it compare to other products?
OEM Products and twin air products are cheaper than Label! However, it seems to have been reduced in cost.
I guess they are trying to keep the price increase to a minimum and cut down on excessive quality, because functionally, it works fine.
0Other items that may be useful include
Point and hang of installation
As mentioned above, the OEM product does not come with bolt holes, so you will need to install them yourself after purchase.
[ITEMS TO BUY TOGETHER
It looked like there was no filter oil applied, so maybe I should buy some filter oil?
Well, I used to use 2nd oil or engine oil instead...
[Opinions and requests to Manufacturer
There are no problems with the installation, so please keep the price low and line up for many years to come.View Detail
I used to use it when I was on Air BoxSpec.
This is a good and cheap product.
Setting is also determined, and Power comes out more than Normal.
good point
Cheapness and performance.
Carburetor setting is easy to produce, a little darker than NORMAL, Large and strong.
Easy to clean. Can be washed with neutral detergent.
A bad point
None
I think the expensive ones are good, but if you're looking for something cheap and good, I'd recommend this one. ,.View Detail
Purchased for regular replacement.
If it were a little cheaper, I could get a stable replacement...View Detail
?attachment
The CBR650R is mounted at the same position angle as the NORMAL.
However, when the handlebar was cut to the Left lock, it interfered with the interior cover next to the Meter, so the interior cover was cut away.
I also purchased a 45° angled banjo adapter for the mesh hose to accommodate the tension of the mesh hose.
・NORMAL (Reserve integrated horizontal master) Impressions of
No complaints on public roads. Familiar feel and very easy to handle.
However, when the brake is set to "hard brake," the rate of increase in braking force relative to the input seems to decrease, and the brake becomes more forceful.
Radipon (Reserve separate body portrait master) Impressions of
It was totally different from what I expected, my expectation was that it would feel like a Rear brake…
It is really a mild and easy-to-handle radipon.
On public roads, it feels like NORMAL! I wonder if it's because NORMAL is the same NISSIN?
But I felt the radipon effect from Breaking a little stronger, and
It can be hung up to a hard brake without effort.
I felt trust that this could stop.View Detail
I purchased this for use with multiple Helmets. 。
Mount included with the BOLD.
Microphone and speaker are not included and must be purchased separately.View Detail
Grip that had been used for a long time was worn out and had to be replaced.
They are soft and dampen vibration.View Detail
[How is it used?
Used to lick Screw loose.
Was the one you received as per Image?
As per Image.
How was your experience with it?
When used on a strongly tightened Screw, it can be safely and securely removed.
The licked Screw was removed.
It is also useful for DIY Screw removal.
[Points to note]
When used on a licked Screw, it is best to beat it in with a Hammer before use.View Detail
To continue viewing this product on Japan domestic webike (in Japanese), press "Go to Japan Domestic".
Customer Service
INFORMATION
THE LARGEST
SHOP IN JAPAN
EXCLUSIVE COUPONS,
SALE, DEALS
FAST, RELIABLE
SHIPPING